SAR EX3DV4

FCC ID: HLZZE1BG

RF Exposure Info

Download: PDF
FCCID_600620

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzeriand Swiss Calibration Service Accredited by the Swiss Federal Office of Metrology and Accreditation Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatoriesto the EA Multilateral Agreement for the recognition of callbration certificates Client (CCS (Auden) ag Commennc: EX3—3554_NovO4 CALIBRATION CERTIFICATE I Object EX3DV4 ~SN:3554_ Calibration procedure(s) QA CAL—01.v6 Calibration procedure for dosimetric E—field probes Callbration date: Condition of the caltrated tem ‘In Tolerance_ This callbration certificate documents the traceabilty to national standards, which realize the physical units of measurements (81). The measurements and the uncertainties with confidence probabilty are given on the folowing pages and are part of the certficate. All callbrations have been conducted in the closed laboratory faciity: environment temperature (22 + 3)°C and humidity < 70%. Callbration Equipment used (MBTE critical for calibration) Primary Standards n# Gal Date (Caliorated by. Certificate No) Scheduled Calibration Power meter E44198 ceetzssers 5—May—04 (METAS, No. 251—00388) May—05 Power sensor E4412A mvarags2r? 5—May—04 (METAS, No. 251—00388) May.05 Reference 3 dB Aftenuator SN: s5054 (dc) 10—Aug—04 (METAS, No. 251—00403) Aug—05 Reterence 20 dAttenuator sn se0se (200) 3—May—04 (METAS, No. 251—00389) May.05 Reference 30 dB Attenuator Snss120 (co0) 10—Aug—04 (METAS, No. 251—00404) Aug—05 | Reference Probe ESSDV2 sn so1e 8~Jan—04 (GPEAG, No. ES3—3013_Jand4) Jan—05 oaed SN: 617 26—May—04 (SPEAG, No. DAE4—617_MayO4) May.05 Secondary Standards D# Check Date (in house) Scheduled Check Power sensor HP 8481A mvaros2180 18—8ep—02 (GPEAG,in house check Oct03) In house check: Oct 05 RF generator HP 8648C usses2u01700 4—Aug—9 (GPEAG, in house check Dec—03).. In house check: Dec—05 Network Analyzer HP 8753E ussrssoses 18—0ct—01 (SPEAG, in house check Now—08) In house checkc Nov 04 Name ______Function _ Signature 8 Caliorated by: Nico Veteni f Approved by: Katia Pokovic Technical Manager z> Issued: December7, 2004 This calibration certiicate shall not be reproduced except in full wihout writen approval of the laboratory. Certiicate No: EX3—3554_Nou04 Page 1 of 10

Calibration Laboratory of s Schweizerischer Kalibrierdionst Schmid & Partner c Service suisse d‘étalonnage Engineering AG Servizio svizzero di tarature Zoughausstrasse 43, 8004 Zurich, Switzeriand S Swiss Calibration Service Accredited by the Swiss Federal Office of Metrology and Accreditation Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreementfor the recognition of calibration cortificates Glossary: TSL tissue simulating liquid NORMxy,z sensitivity in free space ConF sensitivity in TSL / NORMx.y,z DCP diode compression point Polarization o @ rotation around probe axis Polarization $ 8 rotation around an axis that is in the plane normal to probe axis (at measurement center), i.e., 3 = 0 is normal to probe axis Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques®, December 2003 b) CENELEC EN 50361, "Basic standard for the measurementof Specific Absorption Rate related to human exposure to electromagnetic fields from mobile phones (300 MHz — 3 GHz), July 2001 Methods Applied and Interpretation of Parameters: NORMx,.y,z: Assessed for E—field polarization 3 = 0 (f < 900 MHz in TEM—cell; f > 1800 MHz: R22 waveguide). NORMx,y,z are only intermediate values, i.e., the uncertainties of NORMx,y,z does not effect the E*—field uncertainty inside TSL (see below ConvF). NORM(Ax,y,z = NORMx,y,z * frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency responseis included in the stated uncertainty of ConvF. DCPx,y,2z: DCP are numerical linearization parameters assessed based on the data of power sweep (no uncertainty required). DCP does not depend on frequency nor media. ConvF and Boundary Effect Parameters: Assessed in flat phantom using E—field (or Temperature Transfer Standard for f < 800 MHz) and inside waveguide using analytical field distributions based on power measurements for f > 800 MHz. The same setups are used for assessmentof the parameters applied for boundary compensation (alpha, depth) of which typical uncertainty values are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx,.y,z * ConvF whereby the uncertainty corresponds to that given for Conv. A frequency dependent ConvF is used in DASY 4.3 B17 and higher which allows extending the validity from + 50 MHz to + 100 MHz. Spherical isotropy (3D deviation from isotropy): in a field of low gradients realized using a flat phantom exposed by a patch antenna. Sensor Offset: The sensor offset corresponds to the offset of virtual measurement center from the probe tip (on probe axis). No tolerance required. Certificate No: EX3—3554_Nov04 Page 2 of 10

EX3DV4 SN:3554 November 19, 2004 Probe EX3DV4 SN:3554 Manufactured: July 13, 2004 Calibrated: November 19, 2004 Calibrated for DASY Systems (Note: non—compatible with DASY2system!) Certiicate No: EX3—3554_NovO4 Page 3 of 10

EX3DV4 SN:3554 November 19, 2004 DASY — Parameters of Probe: EX3DV4 SN:3554 Sensitivity in Free Space® Diode Compression® NormX 0.39 +9.9% uVi(Vim)® DCP x 92 mV Norm¥ 0.41 £9.9% uVi(Vim)® DCP Y 92 mV NormZ 0.42 +9.9% uVi(Vim)® DCP Z 92 mV Sensitivity in Tissue Simulating Liquid (Conversion Factors) Please see Page 8. Boundary Effect TSL 900 MHz Typical SAR gradient: 5 % per mm Sensor Center to Phantom Surface Distance 2.0 mm 3.0 mm SARs, (%) Without Correction Algorithm 3.7 1.1 SARse [0%] With Correction Algorithm 0.2 0.4 TSL 1750 MHz Typical SAR gradient: 10 % per mm Sensor Center to Phantom Surface Distance 2.0 mm 3.0 mm SARse %] Without Correction Algorithm 4.8 24 SARs, 0) With Correction Algorithm 0.8 0.8 Sensor Offset Probe Tip to Sensor Center 1.0 mm ‘The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. * The uncertainties of NomX,Y.,Z do not affect the E—feld uncertainty inside TSL (see Page 8). ® Numerical inearization porametor: uncertainty not reguired. Certificate No: EX3—3554_NovO4 Page 4 of 10

EX3DV4 SN:3554 November 19, 2004 Frequency Response of E—Field (TEM—Cell:ifi110 EXX, Waveguide: R22) ‘ 0 500 1000 1500 2000 2500 3000 Uncertainty of Frequency Response of E—field: £ 6.3% (k=2) Certficate No: EX3—3554_NovO4 Page 5 of 10

EX3DV4 SN:3554 November 19, 2004 Receiving Pattern (¢), 8 = 0° £= 600 MHz, TEM ifi110EXX £=1800 MHz, WG R22 as L 2s ‘ o6 [4—-30 Mz zo 04 —=— 100 MHz | $ °'2‘ D |—a—300 mz 5 g:gfi‘ oo | —m— 1800 MHz| # s¥ LJTI |—a—2500 z) 118 4AAA 0.8 f 10 C ! o 60 120 180 240 300 360 Uncertainty of Axial Isotropy Assessment: + 0.5% (k=2) Certificate No: EX3—3554_NovO4 Page 6 of 10

EX3DV4 SN:3554 November 19, 2004 Dynamic Range f(SARpeaq) (Waveguide R22, f= 1800 MHz) 1.2+6 es : Input Signal [myV) 1E+4 1168 + | 18424 16+ 11280 o.0001 0.001 o1 0.1 1 10 100 SAR [mWiem‘ Me" n‘Setll ie | —@— not compensated —@~— compensated ( j % os } OE & o2 L ‘}! “W ;E:-o.z i0 L . M $ m‘a NNiE 18 ]. y oooommfi9OEA C NEHTTT 0.001 0.1 1 10 100 SAR [mWiem‘ Uncertainty of Linearity Assessment: £ 0.6% (k=2) Certificate No: EX3—3554_NovO4 Page 7 of 10

EX3DV4 SN:3554 November 19, 2004 Conversion Factor Assessment _ mooee _ . —— £=900 MHz, WGLS R9 (head) £=1750 MHz, WGLS R22 (head) $§1—2 = sSt————mmri= m | TTTTTITTTTT| "A&—5——m 11115 | 250 4 ‘ & 25 | & zoo 2 | £ | E20 | "g § $ 10 3 *# & | £ & 3 10 ‘ ‘ 3 108 o5 — 50o | ss ‘ z[mm] | z[mm] | —o—Analytical —>—Measurements | | —0—Analytical —>—Measurements | ‘ f ukiz] Validity [MHz]® ____TSL Permittivity Conductivity Alpha__Depth____ConvF Uncertainty 835 * 50 / + 100 Head 41.5%5% 0.9025% 0.91 0.66 7.94 £11.0% (k=2) 900 + 50 /+ 100 Head 41.525% 0.9725% 1.01 0.61 7.58 £11.0% (k=2) 1750 £50/2100 Head 40.125% 1.3745% 0.65 0.80 6.85 £11.0% (k=2) 1900 £50/2100 Head 40.0%5% 1.40%5% o.3 0.89 6.61 £11.0% (k=2) 2450 £50/2100 Head 39.225% 1.8025% 0.67 0.74 6.20 £11.8% (k=2) 835 + 50 / £ 100 Body 55.215% 0.9725% 0.96 0.66 7.81 £11.0% (c=2) 900 50 / £ 100 Body 55.025% 1.05%5% 1.06 0.61 7.57 £11.0% (k=2) 1750 £50/2100 Body 53.425% 1492 5% 0.52 1.15 640 £11.0% (k=2) 1900 £50/2100 Body §3.325% 1.5215% 0.46 1.35 6.24 £11.0% (k=2) 2450 £50/%100 Body 52.7£5% 1.9525% 0.79 0.67 6.14 £11.8% (k=2) © Thevalidity of £ 100 Mz only applies for DASY 4.4 and higher (see Page2}. The uncertainty is the RSS of the Conv uncertainty at calibration frequency and the uncertainty for the indicated frequency band. Certificate No: EX3—3554_NovO4 Page 8 of 10

EX3DV4 SN:3554 November 19, 2004 Deviation from Isotropy in HSL Error (6, 3), £= 900 MHz Error [dB] [m—1.00—0.80 ©—0.80—0.0 ©—0.60—0.40 ©9—0.40—020©—0.200.00 ‘ Hon0020 mo20040 to4o.060 mos00s0 ©os0—1.00 L Ens s mnimss Uncertainty of Spherical Isotropy Assessment: £ 2.6% (k=2) Certificate No: EX3—3554_NovO4 Page 9 of 10

EX3DV4 SN:3554 November 19, 2004 Appendix® omm £= 5200 MHz, WGLS RS8 (head) £=5200 MHz, WGLS R58 (body) 70.0 ; 70.0 SAR[mWiom) / W SAR[mWiom? / W 20 z[mm] —0—Analytical —0—Measurements —o—Analylical —o—Measurements | ‘ f [MHz]® validity [MHz] TSL Permittivity Conductivity Alpha Depth_ ConvE Uncertainty 5200 £50 Head 36.0%5% 4.66£5% 048 1.80 4.27 £13.6% (k=2) 5500 +50 Head 35.645% 4.9645% 046 1.80 3.87 £13.6% (k=2) 5800 +50 Head 35.3%5% 527%5% 046 1.80 385 £13.6% (k=2) 5200 £50 Body 49.0%5% 530%5% 0.47 1.80 4.04 £13.6% (k=2) 5500 50 Body 48.6%5% §65%5% 0.48 1.90 3.63. £13.6% (k=2) 5800 +50 Body 48.2%5% 6.00%5% 0.48 1.90 3.62. £13.6% (k=2) ° Accreditation for ConvF assessment above 3000 MHz is currently applied for. Accreditation is expected at the beginning of 2005. Certficate No: EX3—3554_Nov04 Page 10 of 10


Document Created: 2005-09-13 09:50:17
Document Modified: 2005-09-13 09:50:17
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC