SAR Report 4 of 4

FCC ID: HLZTMDMA500

RF Exposure Info

Download: PDF
FCCID_1553324

Calibration Laboratory of Schweizerischer Kalibrierdienst Schmid & Partner Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client Object Calibration procedure(s) Calibration date: This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID # Cal Date (Certificate No.) Scheduled Calibration Power meter EPM—442A GB37480704 06—Oct—10 (No. 217—01266) Oct—11 Power sensor HP 8481A US37202783 06—Oct—10 (No. 217—01266) Oct—11 Reference 20 dB Attenuator SN: S5086 (206) 29—Mar—11 (No. 217—01367) Apr—12 Type—N mismatch combination SN: 5047.2 / 06327 20—Mar—11 (No. 217—01371) Apr—12 Reference Probe ESSDV3 SN: 3205 29—Apr—11 (No. ES3—3205_Apri1) Apr—12 DAE4 SN: 601 04—Jul—11 (No. DAE4—601_Jul11) Jul—12 Secondary Standards 1D # Check Date (in house) Scheduled Check Power sensor HP 8481A MY41092317 18—Oct—02 (in house check Oct—09) In house check: Oct—11 RF generator R&S SMT—06 100005 04—Aug—99 (in house check Oct—09) In house check: Oct—11 Network Analyzer HP 8753E US$37390585 S4206 18—Oct—01 (in house check Oct—10) In house check: Oct—11 Function Calibrated by: Approved by: Issued: July 25, 2011 This calibration certificate shall not be reproduced excaptin full without written approval of the laboratory. Certificate No: D2450V2—736_Jul11 Page 1 of 8

R & w5 l5tpe Calibration Laboratory of s\“\\‘-/\\//l/"/,; Schwelzerischer Kalibrlerdienst Schmid & Partner S‘B\GE_/MEé Service suisse d‘étalonnage Engineering AG Ne L Servizio svizzero di taratura ; Zeughausstrasse 43, 8004 Zurich, i Switzerland x*/fi\“\\ zwy Swiss Callbration Service CARS Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid ConvF sensitivity in TSL / NORM x.y,z N/A not applicable or not measured Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, "IEEE Recommended Practice for Determining the Peak Spatial— Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) 1EC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) Federal Communications Commission Office of Engineering & Technology (FCC OET), "Evaluating Compliance with FCC Guidelines for Human Exposure to Radiofrequency Electromagnetic Fields; Additional Information for Evaluating Compliance of Mobile and Portable Devices with FCC Limits for Human Exposure to Radiofrequency Emissions", Supplement C (Edition 01—01) to Bulletin 65 Additional Documentation: d) DASY4/5 System Handbook Methods Applied and Interpretation of Parameters: Measurement Conditions: Further details are available from the Validation Report at the end of the certificate. All figures stated in the certificate are valid at the frequency indicated. Antenna Parameters with TSL: The dipole is mounted with the spacer to position its feed point exactly below the center marking of the flat phantom section, with the arms oriented paralle! to the body axis. Feed Point Impedance and Return Loss: These parameters are measured with the dipole positioned under the liquid filled phantom. The impedance stated is transformed from the measurement at the SMA connector to the feed point. The Return Loss ensures low reflected power. No uncertainty required. Electrical Delay: One—way delay between the SMA connector and the antenna feed point. No uncertainty required. SAR measured: SAR measured at the stated antenna input power. SAR normalized: SAR as measured, normalized to an input power of 1 W at the antenna connector. SAR for nominal TSL parameters: The measured TSL parameters are used to calculate the nominal SAR result. Certificate No: D2450V2—736_Jul11 Page 2 of 8

Measurement Conditions DASY system configuration, as far as not given on page 1. DASY Version DASYS V52.6.2 Extrapolation Advanced Extrapolation Phantom Modular Flat Phantom Distance Dipole Center — TSL 10 mm with Spacer Zoom Scan Resolution dx, dy, dz =5 mm Frequency 2450 MHz x 1 MHz Head TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Head TSL parameters 22.0 °C 39.2 1.80 mho/m Measured Head TSL parameters (22.0 + 0.2) °C 38.9 + 6 % 1.85 mho/m £ 6 % Head TSL temperature change during test <0.5 °C SAR result with Head TSL SAR averaged over 1 cm° (1 g) of Head TSL Condition SAR measured 250 mW input power 13.9 mW /g SAR for nominal Head TSL parameters normalized to 1W 54.8 mW /g + 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Head TSL condition SAR measured 250 mW input power 6.44 mWw /g SAR for nominal Head TSL parameters normalized to 1W 25.6 mW /g + 16.5 % (k=2) Body TSL parameters The following parameters and calculations were applied. Temperature Permittivity Conductivity Nominal Body TSL parameters 22.0 °C 52.7 1.95 mho/m Measured Body TSL parameters (22.0 + 0.2) °C 51.7 46 % 2.00 mho/m + 6 % Body TSL temperature change during test <0.5 °C SAR result with Body TSL SAR averaged over 1 cm‘ (1 g) of Body TSL Condition SAR measured 250 mW input power 13.3 mW /g SAR for nominal Body TSL parameters normalized to 1W 52.3 mW / g 2 17.0 % (k=2) SAR averaged over 10 cm* (10 g) of Body TSL condition SAR measured 250 mW input power 6.18 mW /g SAR for nominal Body TSL parameters normalized to 1W 24.5 mW / g + 16.5 % (Kk=2) Centificate No: D2450V2—736_Jul11 Page 3 of 8

Appendix Antenna Parameters with Head TSL Impedance, transformed to feed point 54.4 Q + 1.5 jQ Return Loss —27.0 dB Antenna Parameters with Body TSL Impedance, transformed to feed point 50.8 Q + 2.8 jQ Return Loss — 30.7 dB General Antenna Parameters and Design Electrical Delay (one direction) 1.159 ns After long term use with 100W radiated power, only a slight warming of the dipole near the feedpoint can be measured. The dipole is made of standard semirigid coaxial cable. The center conductor of the feeding line is directly connected to the second arm of the dipole. The antenna is therefore short—circuited for DC—signals. No excessive force must be applied to the dipole arms, because they might bend or the soldered connections near the feedpoint may be damaged. Additional EUT Data Manufactured by SPEAG Manufactured on August 26, 2003 Certificate No: D2450V2—736_Jul11 Page 4 of 8

DASY5 Validation Report for Head TSL Date: 25.07.201 1 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN: 736 Communication System: CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 0 = 1.85 mho/m; & = 38.9; p = 1000 kg/m3 Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI €63.19—2007) DASY52 Configuration: e Probe: ES3DV3 — SN3205; ConvF(4.45, 4.45, 4.45); Calibrated: 29.04.2011 Sensor—Surface: 3mm (Mechanical Surface Detection) Electronics: DAE4 $n601; Calibrated: 04.07.2011 Phantom: Flat Phantom 5.0 (front); Type: QDOOOP50AA; Serial: 1001 DASY52 52.6.2(482); SEMCAD X 14.4.5(3634) Dipole Calibration for Head Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 98.095 V/m; Power Drift = 0.09 dB Peak SAR (extrapolated) = 28.615 W/kg SAR(I g) = 13.9 mW/g; SAR(10 g) = 6.44 mW/g Maximum value of SAR (measured)= 18.121 mW/g "8.25 —13.00 1050 2213 0 dB = 18.120mW/g Certificate No: D2450V2—736_Jul11 Page 5 of 8

Impedance Measurement Plot for Head TSL 25 Jul 2011 11:54f16 CHZ) sii 1 U Fs 1: 54.398 e 1.4805 n 96.173 pH 2 450.000 000 MHz De l Cor Av :I.E;S H1d CH2 Cor Av 16° HId CENTER 2 450.000 000 MHz SPAN 400,000 B0D MHz Certificate No: D2450V2—736_Jul1 1 Page 6 of 8

DASY5 Validation Report for Body TSL Date: 25.07.2011 Test Laboratory: SPEAG, Zurich, Switzerland DUT: Dipole 2450 MHz; Type: D2450V2; Serial: D2450V2 — SN: 736 Communication System: CW; Frequency: 2450 MHz Medium parameters used: f = 2450 MHz; 0 = 2 mho/m; & = 51.7; p = 1000 kg/m* Phantom section: Flat Section Measurement Standard: DASY5 (IEEE/IEC/ANSI €63.19—2007) DASY52 Configuration: Probe: ES3DV3 — SN3205; ConvF(4.26, 4.26, 4.26); Calibrated: 29.04.2011 Sensor—Surface: 3mm (Mechanical Surface Detection) Electronics: DAE4 Sn601; Calibrated: 04.07.2011 Phantom: Flat Phantom 5.0 (back); Type: QDOOOP50AA; Serial: 1002 DASY52 52.6.2(482); SEMCAD X 14.4.5(3634) Dipole Calibration for Body Tissue/Pin=250 mW, d=10mm/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 96.550 V/m; Power Drift = 0.02 dB Peak SAR (extrapolated) = 27.432 W/kg SAR(I g) = 13.3 mW/g; SAR(10 g) = 6.18 mW/g Maximum value of SAR (measured) = 17.294 mW/g —8.05 13.28 17.70 2213 0 dB = 17.290mW/g Certificate No: D2450V2—736_Jul11 Page 7 of 8

Impedance Measurement Plot for Body TSL 25 Jul 2011 11:55:00 (CHT s1 1 U Fs 1: 50.812e 262620 18259 pH 2450,.000 000 MHz Del Cor fv 189 H1d CH2 Cor fy 16° H1d CENTER 2 450,000 000 MHz SPAN 400.000 000 MHz Certificate No: D2450V2—736_Jul11 Page 8 of 8

Calibration Laboratoi y of Schweizerischer Kalibrierdienst Schmid & Partner Service sulsse d‘étalonnage Engineering AG Servizio svizzero di taratura h, Switzerland Swiss Calibration Service ation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA ecognition of calibration certificates Client (Auden) Certificate No: DAE3—495_Apr11 |CALIBEET|ON EERTIFlCATE | Object DAE3 — SD 000 D03 AD — SN: 495 Callbration procdure(s) QA CAL—06.v22 Calibration procedure for the data acquisition electronics (DAE) Calibration date April 28, 2011 This calibration dertficate documents the traceabilty to national standards, which realize the physical units of measurements (S1). The measuremchits and the unc rtainties with confidence probabilty are given on the following pages and are part of the cartificate All calibrations have been conducted in the closed laboratory faciity: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equitment used (M&TE critical for calibration) Primary Standaris 1D 4 Cal Date (Gertificate No.) Scheduled Calibration Kelthiey Multimefer Type 2001 N: oeto27s 28—Sep—10 (No:10376) Sep—11 Secondary Stangards iD# Check Date (in house) Scheduled Check Callbrator Box VJ..1 SE UMS 006 AB 1004 O7—Jun—10 (in house check) In house check Jun—11 Name Function Signature Callbrated by: Dominique Stetfen ‘Technician %\ Approved by: Fin Bomholt R&D Director V. '\g L' Issued: April 28, 2011 This callbration cprificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: DAE3—495_Apr Page 1 of 5

Calibration Laboratory of g Schweizerischer Kalibrierdionst Schmid & Hartner c Service sulsse d‘étalonnage Enginee ring AG PV Bs Servizio svizzero di taratura Zeughausstrassp 43, 8004 Zuri h, Switzerland 4,41//,\\\\\0\? S swiss Calibration Service "ubals® Accredited by t ind Swiss Accreditation Service (GAS) Accreditation No.: SCS 108 The Swiss Accrbditation Servi e is one of the signatories to the EA Multilateral Agréement for the ecognition of calibration certificates Glossary DAE data acquisition electronics Connector angle in ormation used in DASY system to align probe sensor X to the robot coordinate system. Methods AJ pplied and Interpretation of Parameters e DC Voltage Measurement: Calibration Factor assessed for use in DASY system by comparison wit a calibrated instrumenttraceable to national standards. The figure given corrasponds to he full scale range of the voltmeter in the respective range. e Conmector angl e: The angle of the connector is assessed measuring the angle mechanically b a tool inserted. Uncertainty is not required. * The ollowing parameters as documented in the Appendix contain technical information as a resulf from the erformance test and require no uncertainty. DC Voltage Measurement Linearity: Verification of the Linearity at +10% and —10% of the nominal calibration voltage. Influence of offset voltage is included in this nneasurement. (@ommon mode sensitivity: Influence of a positive or negative common mode voltage on the differen ial measurement. (hannel se paration: Influence of a voltage on the neighbor channels not subject to an imput voltag o D Convert er Values with inputs shorted: Values on the internal AD converter rrespondi ng to zero input voltage Ihput Offset Measurement: Output voltage and statistical results overa large number of ro voltage measurements. Ihput Offset Current: Typical value for information; Maximum channel input offset rrent, not considering the input resistance. Thput resistance: Typical value for information: DAE input resistance at the connector, ring intern al auto—zeroing and during measurement. w Battery Alarm Voltage: Typical value for information. Below this voltage, a battery larm signal is generated. * ower consumption: Typical value for information. Supply currents in various operating odes. Certificate No: AE3—495_Apr1 1 Page 2 of 5

DC Voltage Measurement A/D — Converter Resolution nominal High Range: 1LSB= 6ApV , full range =— —100...+300 mV Low Fange: 1LSB= 61nV , full range= ~1.......+3mV DASY meksurement parameters: Auto Zero Time: 3 sec; Measuring time: sec Calibration Factors X Y £ High Range 404.324 + 0.1% (k=2) 405.291 + 0.1%(k=2) 405.62240.1% (k=2) Low Range 3.95043 £ 0.7%(k=2) 3.97613 + 0.7%(ke=2) 3.95159 +0.7% (k=2) Connector|Angle Connector Angle to be used in DASY system 287.5"%1"° Certificate No: LJAE3—495_Apr Page 3 of 5

Appendix 1. DC Voltage Linearity High Range Reading (uV) Difference (1V) Error (%) Channel X + Input 199993.1 —2.74 —0.00 Channel X + Input 20001.66 146 0.01 Channel X -Inp+l —19994.94 5.16 —0.03 Channe{lY + Input 200006.0 116 0.00 Channell Y ¢|ann 20002.16 1.86 0.01 Ghannell¥ _ _— Input —19997.98 2.02 —0.01 Channelz + Input 200005.6 1.57 0.00 ChannellZ + Input 20003.05 3.05 0.02 ChannellZ — Input —19998.31 1.59 —0.01 Low Rartge Reading (1V) Difference (1V) Error (%) Channell X + Input 2000.3 0.26 0.01 ChannellX + Input 199.66 —0.24 —0.12 Channellx — Input —200.28 —0.38 0.19 Channeil¥ + Input 2001.0 1.06 0.05 ChannelIY + Input 200.75 0.85 0.42 Channell¥ — Input —202.12 212 1.06 ChannellZ + Input 1999.0 113 —0.06 ChannellZ + Input 198.35 —1.65 —0.82 ChannellZ — Input —200.94 —1.04 0.52 2. Commor) mode sensitivity DASY medsurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 see Common mode High Range Low Range Input Voltage (mV) Average Reading (uV) Average Reading (1V) Channel 200 2.91 1.12 —200 0.15 —1.40 Channel 200 —0.69 —0.74 —200 —0.12 —0.47 Channel 200 2.83 2.71 —200 ~4.22 —4.44 3. ChannelJseparatlon DASY me fsurementparameters: Auto Zero Time: 3 sec; Measuring time: 3 see Input Voltage (mV) Channel X (gV) Channel Y (uV) Channel Z (u¥) Channel 200 — 2.38 0.36 Channel 200 217 + 4.08 Channel 200 8.22 —0.54 + Certificate No: DAES—495_Apr Page 4 of 5

4. AD—Converter Values with inputs shorted DASY mehsurement parameters: Auto Zero Time: 3 sec: Measuring time: 3 see High Range (LSB) Low Range (LSB) Channel [X 15791 16416 Channel ¥ 15742 16582 Channel iz 15883 16533 5. Input Offset Measurement DASY meksurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 see Input 10M}2 Average (xV) min. Offset (wV) max. Offset (uv) 5* '():“;;’m" Channel K +1.87 —3.03 —0.77 0.45 Channel [¥ 41.74 —2.98 —0.06 0.56 Channel Z 144 —2.79 —0.14 0.61 6. Input Offset Current Nominal Ihput circuitry offset current on all channels: <25fA 7. Input Résistance (Typical values forinformation) Zeroing (kOhm) Measuring (MOhm) Channel K 200 200 Channel f 200 200 Channel F 200 200 8. Low Baftery Alarm Voltage (Typical values for information)_ Typical vlues Alarm Level (VDC) Supply (4 Vee) +7.9 Supply (—Vec) —7.6 9. Power CGonsumption (Typical values for information) Typical vilues Switched off (mA) Stand by (mA) Transmitting (mA) Supply (4] Vee) +0.01 +6 +14 Supply (—|Vec) —0.01 —8 —9 Certificate No: DAE3—495_Apr Page 5 of 5

f ion Laboratory of Calibrat &, see/ G Schweizerischer Kalibrierdienst Schmid & Partner SHE\II/fi Service suisse d‘étaionnage Engineering AG ons \s &)) g Servizio svizzero di taratura Zoughausstrasse 43, 8004 Zurich, Switzeriand */TF\? ® Swiss Calibration Service Wce Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multlateral Agreement for the recognition of callbration cartificates Callbration procedure(s) Caltvation date: opoforrrydvrsprnt This calibration certficate documents the traceabilty to national standards, which realize the physical units of measurements (1. The measurements and the uncertainties with confidence probabilty are given on the following pages and are part of the certiicate. All calibrations have been conducted in the closed laboratory facilty: environment temperature (22 # 3)°C and hurnidity < 70%. Callbration Equipment used (M&TE criical for callbration) Primary Standards iD Cal Date (Certiicate No.) Scheduled Calibration Power metor E44196 GB41293074 3t—Mar11 (No. 217—01372) Apri2 Power sensor E4412A My41498087 3t—Mar—11 (No. 217—01372) Apr12 Roference 3 dB Aftenuator SN: 85054 (Gc) 20—Mar—11 (No. 217—01369) Apr—12 Reference 20 dB Aftenuator SN: 5086 (200) 20—Mar—11 (No. 217—01367) Apr2 Reference 30 dB Attenuator SN: 85129 (306) 20—Mar—11 (No. 217—01370) Aor12 Reference Probe ESSDV2 SN: 3013 20—Dec—10 (No. ES3—3013_Dec10) Dec—11 DAE4 SN: 654 3May—11 (No. DAE4—654_May11) May—12 Secondary Standards iD Check Date (in house) Scheduled Chack RF generator HP 8648G Ussed2u01700 4Au0—99 (in house check Oct—09) in house checkcOct—11 Network Analyzor HP 8753E Ussr300505 13—0ct—01 (in house check Oct—10) In house checkc Oct—11 Function Signature Calbrated by: + 1 Approved by: Issued: June 21, 2011 This callbration certficate shall not be reproduced exceptin full without written approval of the laboratory. Certificate No: EX3—3792_Jun11 Page 1 of 11

Calibration Laboratory of Schwelzerischer Kalibrierdienst Schmid & Partner Service sulsse d‘étalonnage Engineering AG Servizio svizzero di taratura Zoughausstrasse 43, 8004 Zurich, Switzerland Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 108 The Swiss Accreditation Service is one of the signatories to the EA Multlateral Agreementfor the recognition of calibration certificates Glossary: TSL tissue simulating liquid NORMxy,z sensitivity in free space ConvF sensitivity in TSL / NORMxy,z DCP diode compression point CF crest factor (1/duty_cycle) of the RF signal A, B, C modulation dependent linearization parameters Polarization p @ rotation around probe axis Polarization 8 8 rotation around an axis thatis in the plane normal to probe axis (at measurement center), Le., 8 = 0 is normal to probe axis Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2003, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", December 2003 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)*, February 2005 Methods Applied and Interpretation of Parameters: *« NORMxy,z: Assessed for E—field polarization 8 = 0 (f s 900 MHz in TEM—cell; f > 1800 MHz: R22 waveguide}. NORMxy,z are only intermediate values, i.e., the uncertainties of NORM»x,y,z does not affect the E*—field uncertainty inside TSL (see below ConvF). * NORM(Axy,z = NORMx.y,z * frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency response is included " in the stated uncertainty of ConvF. * DCPxy,z: DCP are numerical linearization parameters assessed based on the data of power sweep with CW signal (no uncertainty required). DCP does not depend on frequency nor media. * PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal characteristics * Axy.z; Bxy,zi Cxy.z, VRxy,z: A, B, C are numerical linearization parameters assessed based on the data of power sweepfor specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across thediode. * ConvF and Boundary Effect Parameters: Assessed in flat phantom using E—field (or Temperature Transfer Standard for f s 800 MHz) and inside waveguide using analytical field distributions based on power measurements for f > 800 MHz. The same setups are used for assessment of the parameters applied for boundary compensation (alpha, depth) of which typical uncertainty values are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMxy,z *‘ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in DASY version 4.4 and higher which allows extending the validity from + 50 MHz to + 100 MHz. * Spherical isotropy (3D deviation from isotropy): in a field of low gradients realized using a fiat phantom exposed by a patch antenna. * Sensor Offset: The sensor offset correspondsto the offset of vitual measurement center from the probe tip (on probe axis). No tolerance required. Certificate No: EX3—3792_Jun11 Page 2 of 11

EX3DV4 — SN:3792 June20, 2011 Probe EX3DV4 SN:3792 Manufactured: April 5, 2011 Calibrated: June 20, 2011 Calibrated for DASY/EASY Systems (Note: non—compatible with DASY2 system!) Certficate No: EX3—3782_Jun11 Page 3 of 11

EX3DV4— SN:3792 June 20, 2011 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3792 Basic Calibration Parameters Sensor X Sensor Y Sensor 2 Une (k22) Norm (uV/(Vim)")" 0.64 0.54 0.54 £10.1 % DCP (mV)" 97.9 98.9 99.8 Modulation Calibration Parameters uip Communication System Name PAR A B 6 VR Une® aB aB aB mV (k=2) 10000 ow 000 x |_0.00 0.00 109 1342 127 % y |_0.00 0.00 100 1238 z |_0.00 0.00 100 1229 The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. * The uncertainties of NormX,Y.Z do not affect the E—field uncertainty nside TSL (see Pages 5 and 6) ® Numerical linearization parameter: uncertainty not required. ® Uncertainty is determined using the max. deviation from inear response applying rectangular distrbution and is expressed for the square of the field value. Certificate No: EX3—3792_Jun11 Page 4 of 11

EX3DV4— SN:3702 June 20, 2011 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3792 Calibration Parameter Determined in Head Tissue Simulating Media Relative Conductivity Depth Unct. f£(MHz)* Permittivity" (Sim)" ConvFX ConvFY ConvFZ Alpha _(mm) (k=2) 835 41.5 0.90. 8.93 8.93 8.93 0.80 0.67 £120% 900. 41.5 0.97 8.69 8.69 8.69 075 071 £120% 1750 40.1 1.37 8.06 8.06 8.06 o.75 062 £120% 1900 40.0 140 7.76 7.76 7.76 0.76 0.60 £120% 2000 40.0 1.40 7.68 7.68 7.68 0.80 057 £120% 2300 39.5 1.67 727 727 727 o73 061 £120% 2450 30.2 1.80 6.92 6.92 6.92 0.70 062 £120% 2600 39.0 1.95 6.85 6.85 6.85 0.62 0.68 £120% 3500 37.0 2.91 6.74 6.74 6.74 0.34 103 £131% 5200 36.0 4.66 4.95 4.95 4.95 0.35 1.80 £13.1% 5300 35.0 4.76 471 4.71 4.71 0.35 1.80 £13.11% 5500 35.6 4.96 4.66 4.66 4.66 0.40 180 £13.1% 5600 35.5 5.07 4.23 4.23 4.23 0.45 1.80 £131% 5800 35.3 5.27 4.42 4.42 442 0.43 180 £13.1% ° Frequency validty of x 100 MHz only applies for DASY vé.4 and higher (see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS f the ConvE: uncertainty at calibration frequency and the uncertainty for the indicated frequency band. " Atffequencies below 3 GHz, the validty of tissue parameters (s and o) can be relaxed to + 10% if lquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validly of issue parameters (e and 0)is restricted to + 5%. The uncertainty is the RSS of the Convuncertainty for indicated target tissue parameters. Certificate No: EX3—3792_Jun11 Page 5 of 11

EX3DV4—— SN:3792 June 20, 2011 DASY/EASY — Parameters of Probe: EX3DV4— SN:3792 Calibration Parameter Determined in Body Tissue Simulating Media Relative Conductivity Depth Unct. [(MHz)®_| Permittivity" (Sim)" ConvFX ConvFY| ConvFZ Aipha _(mm) (k=2) 835 55.2 o.97 9.02 9.02 2.02 0.80 0.72 £120% 200 55.0 1.05 8.91 8.91 8.91 oso o7 +120% 1750 53.4 1.49 762 762 762 o.80 069 £120% 1900 53.3 1.52 147 $37 717 o.so o64 £120% 2000 53.3 1.52 715 715 715 o.so o63 £120% 2300 52.9 181 6.90 6.90 6.90 o.s0 061 £120% 2450 52.7 1.95 6.67 667 6.67 o.so o59 £120% 2600 52.5 216 6.53 6.53 6.53 o.s0 o60 £120% 3500 51.3 3.31 6.08 6.08 6.08 029 148 £131% 5200 49.0 5.30 4.22 4.22 4.22 0.50 190 £131% 5300 48.9 5.42 3.93 3.93 3.93 o.s5 190 £131% 5500 48.6 5.65 3.76 3.76 3.16 055 180 £131% 5600 48.5 5.77 3.53 3.53 353 o.60 190 £131% 5800 48.2 6.00 3.78 3.78 are os0 180 +131%] © Frequency validy of + 100 Mz only applies for DASY v4.4 and higher (see Page 2), else i is restricted to + 50 MHz. The uncertainty is the RSS of the ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band "Atfrequencies below 3 GHz, the validity of tissue parameters (e and c) can be relaxed to + 10% ifliquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of issue parameters (s and o)is restricted to + 5%. The uncertainty is the RSS of the Convuncertainty for indicated target tssue parameters Certificate No: EX3—3792_Jun11 Page 6 of 11

EX3DV4— SN:3702 June 20, 2011 Frequency Response of E—Field Frequency response (normalized) (TEM—Cell:fi110 EXX, Waveguide: R22) Uncertainty of Frequency Response of E—field: £ 6.3% (k=2) Certificate No: EX3—3792_Jun11 Page 7 of 11

EX3DV4— SN:3792 June 20, 2011 Receiving Pattern (¢), 8 = 0° £=600 MHz,TEM £=1800 MHz,R22 "yye BJ e e nle! xo Tot Tot x Y & es —tho 10%‘& eo 180_§de 25&!&& Uncertainty of Axial Isotropy Assessment: £ 0.5% (k=2) Certificate No: EX3—3792_Jun11

EX3DV4— SN:3792 June 20, 2011 Dynamic Range f(SARneaq) (TEM cell , f= 900 MHz) 10% 105 104 § & §& 10 ® 5 2 £ 1024 1017 10° f 4 T t 103 102 10‘ 10° 10‘ 10 SAR [mWicm3] Le] _*1 Ce] X compensated X not compensated Y compensated Ce] * Y not compensated Z compensated Z not compensated : 101 100 101 SAR [mW/om3] x Le] + e X compansate d X not compensated Y compensated LeJ Y¥ not compensated 2 compensated Z not compensated Uncertainty of Linearity Assessment: £ 0.6% (k=2) Certificate No: EX3—3792_Jun11 Page 9 of 11

EX3DV4— SN:3792 June 20, 2011 Conversion Factor Assessment 1= 1750 MHz,WGLS R22 (H_convF) 1 = 900 MHz,WGLS R9 (H_convF) sar migy ow migy is ) wayica & neawues Deviation from Isotropy in Liquid Error (§, 9), £= 900 MHz —1.0 —08 —06 —0.4 —02 00 02 04 06 08 10 Uncertainty of Spherical Isotropy Assessment: £ 2.6% (k=2) Certficate No: EX3—3792_Jun11 Page 10 of 11

EX3DV4— SN:3792 June 20, 2011 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3792 Other Probe Parameters Sensor Arrangement Trangular Connector Angle (°) Not applicable Mechanical Surface Detection Mode enabled Optical Surface Detection Mode disabled Probe Overall Length 337 mm Probe Body Diameter 10 mm Tip Length 9 mm Tip Diameter 2.5 mm Probe Tip to Sensor X Calibration Point 1 mm Probe Tip to Sensor Y Calibration Point 1 mm Probe Tip to Sensor Z Calibration Point 1 mm Recommended Measurement Distance from Surface 2 mm Certificate No: EX3—3792_Jun11 Page 11 of 11


Document Created: 2011-09-29 18:52:46
Document Modified: 2011-09-29 18:52:46
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC