SAR Calibration Cert

FCC ID: HLZAX200NG

Test Report

Download: PDF
FCCID_4308453

Report No. :EN/2019/40024 Rev: 01 Page : 1 of 15 Appendix B - DAE & Probe Calibration Certificate Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group

Calibration Laboratory of & Setmoizerincher Kalisirtionat Schmid & Partner c Service suiase détaonmage Engineering AG. Swvitls mitsors it erdive Zeughoustrasse 4 004 urich,Suteeniand 5. snOntoretion servce Accrudtety ho Smis Acerectaton Sovice SA Acerdisiontis SCS 0108 ‘The Swise Aceredittlonce 1 onofi signnerietothe EA MuMnteral Agreement frthe recognition of calbrmion cortfcase Glossary DAE data acquisition elacironics Connector angle information used in DASY system to align probe sensor X to the robot coordinate system. Methods Applied and Interpretation of Parameters * DC Vollage Measurement: Calloration Factor assessed far use in DASY system by comparison with a calbrated instrument traceable to national standards. The figure given corresponds to the full seale range of the voltmeter in the respective range. * Conneotor angle: The angle of the connector is assessed measuring the angle mechanically by a tool inserted. Uncertainty is not required. * The following paramaters as documented in the Appendix contain technical information as a result from the performance test and require no uncertainty. «DC Vollage Measurement Linearity: Verification of the Lineerity at +10% and ~10% of the nominal calibration voltage. Influence of offset valtageis included in this measurement. x Common mode sensitivity: influence of a positive ar negative common mode voltage on the differential measurement. + Channel separation: Inluence of a voltage on the neighbor channels not subject to an input voltage * AD Converter Values with inputs shorted: Values on the internal AD convertar corresponding to zero input veltage * Input Ofiset Measurement Output voltage and statitical results over a large number of zero voltage measurements. + Input Offset Current: Typical value for information; Maximum channel input offeet current, not considering the input resistance. * Input resistance: Typicel value for information: DAE input resistance at the connector, during internal auto—zeroing and during measurement. «. Low Battery Alam Vollage: Typical value for information, Below this voltage, a battery alarm signal is generated. + Power consumption: Typical value for information. Supply eurrents in various operating modes. Conticme No: DABt—#77.martd Pago Rots

DC Voltage Measurement AD — Converter Resohtion nominal Han Range nse— sn Low Range: nse= atev DARY meusurement pararmeters: Aute Zoro Tine. 2 ; Mownuring Ime: 3 seo Callbration Factors x ¥ & High Fange 205008 : 0.00% (ke2) 404.575 + 0.02% (ke2)| 404.990 20.02% (ke2) Low Range ase158 + 1608 (ke2) 00170 2 1.50% (ked) 897140 2 15006 (hea) Connector Angle [ conneeter Anale ts bo uses in DASY sysiem gaannir® Cerifcate No: DAG#277.Marth Paged ars

Appendix (Additiona! assessments outside the scope of SCS0108) 1. DC Voltage Linearity High Range Reading (x¥) Difference (i¥) Error (%) Channel X _ _+ Input 2ooo 0e se sn Channel X + input 2000702 aro CH Ghannet x _ — input 200425 ts am Ghannol Y + input 200098.00 aro aco Ghannat Y + input 2oonr o7 1er co Channal Y _ — Input 2uoser oss 00 Ghannel 2 + input 200099 7e ans on Channel 2 _ _+ Input 2ooosse 1or o Channel 2 _ — input —20n05.75 ase w00 Low Range Reatting (a¥) Difference (p¥) Error (%) Ghannel X + Input 200031 as aes Channel X _ _+ Input 20071 i8 «ue Channet X___— input 1so9 ons ue Ghannel Y _ _+ Input 200065 on <o1 GhannelY _ _+ input 10 70 415 asr Chennol Y ___—Input —ars 7e os Ghannel z_ +input 200033 ws ane Channel 2 _ _+ Input ia.a6 —1so ars Ghannol 2 —fnput anize 22 im 2. Common made sensitivity DASY measurement parametars. Auto Zero Time: 3 seo; Measuting lime 3 seo Common made High Range Low Range Input Voitage (m¥) Average Reacing (1y) Average Reading (1V) Channel x 2oo isae 1948 «200 mor cam Channel ¥ zo —19.80 —19.48 —200 120 en Channai 2 2oo 2oca 1980 —0 asis 2338 3. Channel separation OASY measurement paremeters: Auta Zete Time: 3 sec; Memauring Ime: 3 seo Input Voltage (m¥) Channel X (1¥) Channel Y (1¥)|. Channel2 (u¥) Channel X 200 030 s40 Ghannel ¥ 200 7i — mao Channel zo0 ase 435 Corificato No: DRE4—877_ Marl B Page 405

Report No. :EN/2019/40024 Rev: 01 Page : 5 of 15 Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group

Calibration s Laboratory of Schuatzedscher Katersinst Schmid & Partner @. Serviee vieon #italonnage Enginering AG Tncewnn Seniy meanit Hiewpre Zoogausstiaase 43,800 Zunen, Sutzetina ts 5. ces Cattration Sonice Th Accredtes by lSnissAccrustion Sevicn za8) Accrdtaion ho $CS 0108 The SwiAcceesition Survee s ons otthe sgnatariestothe EA Mullatera Aureementtor herosogniton t cairation coniicates SGS(Audan} Cucifcatsno: EX3—7509:Mar 19 Oe Ex3DV4— sNi75o8 Commmton esstirass OA CAL—01:8, OA CAL—14MS, OXCAL—23v5, OX CAL2S7 Calloration procedure for dosimetnc E—feld probes | catmatin date March 25, 2018 Ti cabrmin coricte ocmrens n lncenito natonaslaclris, etich matse e ctyacalunof maancremonts 5l Te mmeiznrintsand t sncmakla wl cortidecesaklit e sler onthfoloung pages ant e e o h cieae, Allcaleraton have been contiens n the es anortoyfaoliy: onsorerenpmatine (2 TJC and hamely <10% Catbraten Enemert o (RATE erteat cnitraton) [Fiivary Sndonte © S o (Crticai No ) Stteciled Caltmion Posnrmes hi suroure btap—in to, 217oorzceems sn Pore same Nee251 Emm 0tAt6the 27 omm aocto Poser senserhe.2s1 sn rooms othpets ho 200 Jecip _ Petwnce20 98 Nimater SN. Ss27 200 ‘o%hit (he 217. em) secms paee sn sto Thec—ise osee0co becie] Dect Hafwnnen Prans Essous sn soid 3rioee 1ihe Esa0taDoot) Deeo I Seconaan Stnaws a Gheck tale t se | Seremiee Cns Pows mate Eie snceviaosere 0tApr it (n roume eveck im18)__| in se ce Jonat ow sensor Etd 2k | sicuivecomer 06h016 (n hm chack Jn 0) .‘foume chedc Jnt Poom somerEéerzh su ontew 0thot(n boume erect un18| in touse e Janal K pevenor 9 Bs«cG suvessevorm Otshup3H in hohk Jun1 in towe oo Jn20 HetwcrAumbye Eastah sn vssio00er #rmrnt on hovsw neck Gev1t) | intowe es Oc io Nine Furston fatke Gaieenes uy uis t ‘aksminereowms 4 Avoroves ty wigainaine Tebin ieages M issues maren 25.2m0 Ts vaton ceael atheresced excesi twihou weten poroat of ie latostoy Ceniicats No: EX3—2500Martu Pase 1 of o

Calibration Laboratory of semmiuiichic at w Schmid & Partner $ fmmncimage. . Engineering AG Boov evicrre i tratra Zoughainstrasse 43 1004 zimen, Swinedland S uin Callvation Savice Acerndind by e Sws Ancuton Sarvee8) Accmtissoe No: SCS 0108 ‘Tsmine Aceracition Servie is one o thesignatoas o the EA Huiniateral Agreoment for th recogniton o caltwatoncoicutes Glossary: Ts tiosue simulatng leuid NORMicyiz saniilily in free space CoF sensiivil n TSL /NORMcy.e bce diose compression pornt or erestfactor (Wduty_cyate) ofthe RF signal A 8.0,D medlatin daneidentIinesrization pararmotens Pobrizaton o «n totationaround probe asis Polaitzation 6 8 rotaton around an ani thali in the pane nrmat 10 prove axis (at measurament center}, i8 8 =0 is nomal to probe axis Gomector Ange Informallanused in DASY system toallgn probe nermor X to the rabat caordinate system Calibration is Performed According to the Following Standards: a) EEE td 1590—2019, EEE Recommended Prodtice for Detorrining the Peak SpaliatAveraged Speciic AbsorptionRote (SAR) in the Human Head from Wreless Commun‘cations Dovions: Measurement Techniques\ June 2018 D (EC 822001, *, *Measurement srocecure for the nssssment of Specifc Absocation Rate (SARfrom taand— hele and boay.mounted cavices used nextto the #ar (requency fange af 300 NiHe to 6 GHeY°, July 2016 o EC 6200—2, *Procedure to determins the Specifle Absorption Rate (SAR) Tor wireless communication davioes use in close proximiy to te human body (Fequency renge of 30 Mz to 6 GHz)°, March 2010 0) KDB #65604,°SAR Messurement Reauirements for 100 Mite to 6 GHz" Method ds Applied and Interpretation of Parameters: NORMy 7: Assensed for E—feld polirtzalion i =0 (f= 900 Mz in TEM—oul, > 1800 MHz: RZ2 wavequiae) NORMey wre onlyintermeciate velues, ce the uincertalntes of NRMsy.z does not alfect e E*flel unsertwhiy inside TSL (see below Corut) NORM..z = NORMxy.x " requencyresponse (see Freauiency Response Charf), This Incaration is malemenied in DASY4 soltware versions later than 4.2. The uncertaity of he frequency response is instuded in the slated unceriaintyof Cony® DCEiyce: DCP are numercal nearization paratmeters seseased baed on ine data af power sweep with GW signal (no unceriaintyrequired). DCP donsnat demend on frequiency nor madia RAR: PMR is the Pook to Average Ratlo t i not caltired but determined bnsed on the signal characteristis Any zs Bie: Ocy,e: Dag.e: VRkye A, B, C, D are numenicalIncarization parsmeters assessed basod on ie data of power swrep for specite modulation signal. The pmremeters da not depend on frequency nor media V¥ is the maximum caltration range wxpressed in RMS voltage across tho clade, GomvE and Boundacy Elfact Paruinetars: Assessed in lt phantom Ling E:ld for Tamperature Trancter Standard for! s 800 MHz) and inslde waveguida using analyleal e ristrbtons baset on power measurements for (> 200 MHz. The sarme Selups are used for assessment oftha paramaters applied for boundary carmpensation (algha, dapth)of which ypical unsertainyy values aro given, Thase parameters are used in DASYA sohware to mprove probe acouracy slase to the boundary, The senstvity in TSL. comresponds t NOFhiy;z ° Canve whereby the uncertalnty cartuspords to that given for CanvF. A frecuency dporndant Corvs used in DASY vartion 4.4 and tigher which afous extencing the valdty rom + 80 Mz t 100 M Spherieal sotropy (3D deviatlon from {sotrony): in a feld of ow graciants tealieed using a fat phantom expaseo by a natch anterna Senaer Offset The sensor offsel corresponds to the offset of vrual measuremant center from ths probe tp on probe axis) No tolerance requiren Gonmector Angle: The angle is assessed using tni informaton gained by delermining the NORM: (no uncartainty requred). Conticae No EX3—7500Marth Fiow a of o

excovs —on reon Narh 252010 DASY/EASY — Parameters of Probe: EX3DV4 — SN:7509 Basle Callbration Parameters [ semarx Smay Smant werea—] [hiorm javitvimy? I aar Gas o7 rionk [0GF {mv) 1 se sas 1023 Callbration Results for Modulation Response * WB —— Communication Syiom Name A a | ¢ o se _ as aeviv | an ten o ow x |_an an o |com sire I‘¥ m s0 is [y| o so is The reported uncertainty of measurement is stated as the standard unceriainty of measurement mulliplied by the caverage factor k=2, which for a normal distrbution corresponds to a coverage probabilly of approximalely 95%. 3 Tre uneentnien o Narm2X V o olofi he Etd unseriiny nsTL aee Pages on $ ! bamercu Inaarsaton cmncte unemany rotreqired * unouranti Guiaminad ing ho mcovaten tm (nan rssrne apeon recrgulnruon es anrasset lt ue o h it ce Gontieate No: E307509 Mart9 Page 3 of 10

sxsove— sncrsoo Maren 25, 2018 DASY/EASY — Parameters of Probe: EX3DV4 — SN:7509 Other Probe Paramaters Sonsor Arangemant Tranguler Comnector Anglo") ~ ~—irs Mechanical Surtace Detecton Mode mwabies Opleal Surtace Delection Mode deanied Probe Overall Lengh 337 mm Frobe Booy Diameter 10 m | Tip Length 9 mm Ti Diameter 25 mm Probe Tipto Sensar X Galiraton Pone — Tmm Probe: Tip to Sensor ¥ Caliiraton Point — 3m Proba Tto Sensor 2 Callxaton Pont 1 mm Recommended Meastrement Disance rom Surface 14 mm Centicals No: 0—7500Marto page 4 ar 10

sxtove— sncrsoo ftoran 25 2010 DASY/EASY — Parameters of Probe: EX3DV4 — SN:7509 Calibration Paramater Determined in Head Tissue Simulating Media Relaive Conavaiviy i 7 uen® tss 1tm|_ pemitioty (Sim)" ComFX ComeY Comt 2 | Aha® {mn) (ot) 750 419 ase toar tosr soar osi oso +120% ES 4ns boeo tors toms to1s oss oss +204 so 410 oor ooo ase ase na om 220% wso s01 137 as sa4 asa nas ose sr20% 100 son 140 aso #so aso 63 oss +t20% 2000 «o 140 ago a30 s nas oss +r20% 2300 395 167 sns s13 a11 om o% +105 zu50 we 120 170 170 77e oso os a120% | 2000 _| san 198 rto 220 z70| ose | ocms ste5% szoo o «80 sas sas sas oa0 180 »ri% sson_ 35e are szo 520 sz o4 180 sns | seoo is sor an ar7 a77 oan 1g0 anai% soon 63 sor a9 «us «m | oo 160 efan% 5esw lt teen 300M ut 100 M ony eople n DAGY ut ncoer (eue 2oA s reclu o 80 Wez Te nosring o me is othe Core® ineananty tolbatonRscy and ie waty er hom hrpaicy hnd Fronrey umory Hnten 200 it i+ 05 40 80 ont 70 ifC# onvasmentat 30 64 129 120 n 220 M rucontyVanio Conch anamondw #he iemits, ind Corve inss at 12M a D 1Nlte Nve 5 OeReovency vllycan e oucncen o 110 m ‘ tturmence ba2 Gts tnavatn o onun oevametrs oo) oo en o# 10e hicnoenmatcntomis wolac io imeneirs SAvates.at renuensenanavea itc nvltyof woueparanelaso on a}isesfi t s 5%, Th incennety ism RSS & tno Goneunsotiinyl ndemie se taeve snn Aliwhnat w dearnines auig calbtn. SEX warants Pa renaning sevaton tustos heindnylt aterceroersaten a tlays iss han (h o Foencasm 2 Gt d tm a 71 o rommancns onfua 2ot at any aiceagerhanNt ie on tp Nilonhokrniay Cfeats No: Exi—1300Martu Pagebat 1o

exaove— onirsno Much a5, 2o DASY/EASY — Parameters of Probe: EX3DV4 — SN:7509 Calibration Parameter Determined in Body Tissue Simulating Media t uis© N‘:v.nmflt;:i:yF | “'z;";:;’!ly ComEX GomvEY Convez. Alpha® fi'ni:-:] D‘ZZCL es sss ase 181 mom sost oas nao +120% s35 see anr mse 1ose se oa0 | ues «1208 soo sso 105 mar_| s04t war oae aso r120% 1rso saa 148 ass ses ses ose ass r120% 1300 sas 182 a2 5z am ome oss +120% zo0 ESE is2 an a19 | é1 om 11e «1204 2300 szo 181 an an at1 oss oms +120% 2450 sar 195 wos ans sos oz oss + r20% zen sas 2i _|_ tss 278 r7e_| oas ose at20 seno «o0 5so as1 as as oso iso sa00 «se sae as6 as0 ass oso 180 sioo iss sar ane | ado 413 oso 1so saoo «82 s00 ©20 a2o azo oso se © Fremanny van tcone 200 ie t 190 ete on nct t w unc moterse Page 2) m t i revo 0 it Th unentany ob FBS f h Gore unontarey al enbFnctmcy nie ncutat oihe nacatnbaceneytard enc velty selow200 it m 102510 50 ana TNE in Corn® mtwsrant s T0 04 190 |tlae 220 M recpoctony Vcome oncescnas 5 hete 2 Wite d Gate oniosna t rtcin 29 l Avov 5c hequency vat can e id t a 110Ne ! t reaencee belu 3 Gz, tm it t sprama(c nccanharaied i : 10i ncompentatnforl 1 appasto inéosied SAt vaies AtFovsencm ahove 3th vly ol se porentos (ooi renncuc t x 5. he ncwttysn RSS t ine Come unconney t nicats getiuw onommeien * Rnotasath e sterinad curny cbin 56A airinst hresingtevain eto h bounounadect utculoons on is shsin les hi a 1o hecuencentmew 3 Gitand nlow s 2% o rosseres scb30 6t on itanc agethan hhcce to bnwin tm w touniny Cerifeme No:Exc7508 ks Page s at o

exiovs— snzou March25, 2010 Frequency Response of E—Field (TEM—Celliifi10 EXX, Waveguide: R22) Frequency response (notmalized) Uncertainty of Frequeney Response of E—field: + 6.2% (ex2) Cuticats No: BG—750_Marta Paget of to

Exiove— sh7500 Moreh 25, 2019 Receiving Pattern (¢), 9 = 0° 1=600 MHz,TEM 1=1800 MHz.R22 sid 4 1 so io notr; 3& a atde notthe ashths Uncertainty of AxiaIsotropy Assessment: % 0.5% (ke2) Coriicals No: EXG—7500Martd Page 8 of 10

exaovi— sncrson Maret 25, 2010 Dynamic Range f(SARneaq) (TEM call , fouu= 1900 MHz) inout SignelJ * do i0 ww * G) act comamand comersond Unsertainty of inearity Assossmonts % 0.6% (ke?) Centicae No EX3—7808.Marta Pagauat 10

Report No. :EN/2019/40024 Rev: 01 Page : 15 of 15 - End of report - Unless otherwise stated the results shown in this test report refer only to the sample(s) tested and such sample(s) are retained for 90 days only. 除非另有說明，此報告結果僅對測試之樣品負責，同時此樣品僅保留90天。本報告未經本公司書面許可，不可部份複製。 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at www.sgs.com/terms_and_conditions.htm and for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. SGS Taiwan Ltd. No.134,Wu Kung Road, New Taipei Industrial Park, Wuku District, New Taipei City, Taiwan 24803/新北市五股區新北產業園區五工路 134 號 台灣檢驗科技股份有限公司 t (886-2) 2299-3279 f (886-2) 2298-0488 www.tw.sgs.com Member of SGS Group


Document Created: 2019-06-05 21:38:57
Document Modified: 2019-06-05 21:38:57
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC