user manual safey information

FCC ID: HLZA8202

Users Manual

Download: PDF
FCCID_4421519

The radiated energy from the antennas connected to the wireless adapters conforms to the IC limit of the RF exposure requirement regarding IC RSS-102, Issue 5 clause 4. SAR tests are conducted using recommended operating positions accepted by the FCC/RSS with the device transmitting at its highest certified power level in all tested Productoverview frequencybandwithoutdistanceattachingawayfromthebody.Non-compliancewith theaboverestrictionsmayresultinviolationofFCCRFexposureguidelines. Acer Apollo A8202 Conformité des appareils de radiocommunication aux limites d'exposition humaine aux radiofréquences (CNR-102) FederalCommunicationsCommission 1 2 3 4 5 6 78 L'ordinateur utilise des antennes intégrales à faible gain qui n'émettent pas un champ électromagnétique supérieur aux normes imposées par Santé Canada pour la Declaration of Conformity population. Consultez le Code de sécurité 6 sur le site Internet de Santé Canada à This device complies with Part15 of the FCC Rules. Operation is subject to the l'adresse suivante : http://www.hc-sc.gc.ca/ following two conditions:(1)this device may not cause harmful interference,and (2)this device must accept any interference received, including interference that L'énergie émise par les antennes reliées aux cartes sans fil respecte la limite may cause undesired operation. d'exposition aux radiofréquences telle que définie par Industrie Canada dans la The following local Manufacturer / Importer is responsible for this declaration: clause4.1dudocumentCNR-102,version5. Tests DAS sont effectués en utilisant les positions recommandées par la FCC/CNR Product: Tablet Computer avec le téléphone émet à la puissance certifiée maximale dans toutes les bandes de Brand: acer fréquences testées sans distance attacher loin du corps. Non-respect des restrictions ci-dessus peut entraîner une violation des directives de la FCC/CNR. Regulatory model number A8202 Name of responsible party: Acer America Corporation Brazil Address of responsible party: 333WestSanCarlosSt.,Suite1500 Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode SanJose,CA95110,U.S.A. causarinterferênciaasistemasoperandoemcaráterprimário. Contact person: AcerRepresentative Phone no.: 1-254-298-4000 Mexico Cofetel notice is: Fax no.: 1-254-298-4147 “La operacion de este equipo esta sujeta a las siguientes dos condiciones: (1) es August 31, 2019 posible que este equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier interferencia, incluyendo la que pueda causar su operacion no deseada.” device. 9 2 10 1112 13 1. SIM cardtray 8. Flash 2. Speaker 9. Touch screen 3. Audiojack 10 .USBport 4. Frontcamera 11. Volumebutton 5. Lightsensor 12. IrDA 6. Powerbutton 13. MIC 7. Rearcamera

Safety and comfort Disposal Instructions Regulatory Information (PA) 5 GHz devices only High power radars are allocated as primary users of the 5.25 to 5.35 GHz and 5.65 to Do not throw this electronic device into the trash when discarding. To Safety Instructions minimize pollution and ensure utmost protection of the global environment, Wireless Adapter Regulatory Information 5.85 GHz bands. These radar stations can cause interference with and/or damage this device. No configuration controls are provided for this wireless equipment Read these instructions carefully. Keep this document for future reference. Follow all please recycle. For more information on the Waste from Electrical and allowing any change in the frequency of operations outside the FCC grant of warnings and instructions marked on the product. Electronics Equipment (WEEE) regulations, visit www.acer-group.com/ Use on aircraft authorization for US operation according to Part 15.407 of the FCC rules. public/Sustainability/sustainability01.htm Caution: FCC and FAA regulations prohibit airborne operation of Turning the product off before cleaning radiofrequency wireless devices (wireless adapters) because their signals FCC RF exposure information (SAR) Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. Environment could interfere with critical interfere with critical aircraft instruments. Temperature • Operating: 0 °C to 35 °C The Wireless Adapter and Your Health This device meets the government's requirements for exposure to radio waves. This Warnings • Non-operating: -20 °C to 60 °C The wireless adapter, like other radio devices, emits radio frequency electromagnetic device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of energy. The level of energy emitted by the wireless adapter, however, is less than the Humidity (non-condensing) the U.S.Government. Accessing the power plug • Operating: 20% to 80% electromagnetic energy emitted by other wireless devices such as mobile phones. The exposure standard for wireless devices employs a unit of measurement known Be sure that the power outlet you plug the power cord into is easily accessible and The wireless adapter operates within the guidelines found in radio frequency safety • Non-operating: 20% to 80% standards and recommendations. as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. located as close to the equipment operator as possible. When you need to Tests for SAR are conducted using standard operating positions accepted by the disconnect power to the equipment, be sure to unplug the power plug from the These standards and recommendations reflect the consensus of the scientific community and result from deliberations of panels and committees of scientists who FCC with the device transmitting at its highest certified power level in all tested electrical outlet. Mark sure the power plug is fixed at right position with the adaptor frequencybands. before plugging to the socket on the wall. continually review and interpret the extensive research literature. In some situations or environments, the use of the wireless adapter may be restricted by the proprietor Although the SAR is determined at the highest certified power level, the actual SAR Input rating: Refer to the rating label on the bottom of the computer and ensure that level of the device while operating can be well below the maximum value. This is your power adapter complies with the specified rating. of the building or responsible representatives of the applicable organization. Examples of such situations may include: because the device is designed to operate at multiple power levels so as to use only Under no circumstances should the user attempt to disassemble the power supply. the poser required to reach the network. The power supply has no user-replaceable parts. Inside the power supply are - Using the wireless adapter on board airplanes, or - Using the wireless adapter in any other environment where the risk of interference In general, the closer you are to a wireless base station antenna, the lower the power hazardous voltages that can cause serious personal injury. output. While there may be differences between the SAR levels of various devices A defective power supply must be returned to your dealer. with other devices or services is perceived or identified as being harmful. If you are uncertain of the policy that applies to the use of wireless adapters in a andatvariouspositions,theyallmeetthegovernmentrequirement. Using electrical power specific organization or environment (an airport, for example), you are encouraged to The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR - If an extension cord is used with this product, make sure that the total ampere rating ask for authorization to use the adapter before you turn it on. information on this device is on file with the FCC and can be found under the Display of the equipment plugged into the extension cord does not exceed the extension Grant section of www.fcc.gov/oet/ea/fccid after searching on FCC ID for your device. cord ampere rating. Also, make sure that the total rating of all products plugged into USA—FCC and FAA the wall outlet does not exceed the fuse rating. - Do not overload a power outlet, strip or receptacle by plugging in too many devices. The FCC with its action in ET Docket 96-8 has adopted a safety standard for human exposure to radio frequency (RF) electromagnetic energy emitted by FCC certified Notice for 5 GHz devices The overall system load must not exceed 80% of the branch circuit rating. If power equipment. The wireless adapter meets the Human Exposure limits found in ANSI/ Caution: strips are used, the load should not exceed 80% of the power strip's input rating. IEEE C95.1, 1992. Proper operation of this radio according to the instructions found in this manual will result in exposure substantially below the FCC’s recommended limits. (i) the device for operation in the band 5150 - 5250 MHz is only for indoor use to General The following safety precautions should be observed: reduce the potential for harmful interference to co-channel mobile satellite systems; - Do not use this product near water. - Do not touch or move antenna while the unit is transmitting or receiving. (ii) the maximum antenna gain permitted for devices in the bands 5250 - 5350 MHz - Do not place this product on an unstable cart, stand or table. If the product falls, it - Do not hold any component containing the radio such that the antenna is very close and 5470 - 5725 MHz shall comply with the e.i.r.p. limit: and could be seriously damaged. or touching any exposed parts of the body, especially the face or eyes, while (iii) the maximum antenna gain permitted for devices in the band 5725 - 5825 MHz - Slots and openings are provided for ventilation to ensure reliable operation of the transmitting. shall comply with the e.i.r.p. limits specified for point-to-point and non point-to-point product and to protect it from overheating. - Do not operate the radio or attempt to transmit data unless the antenna is operation as appropriate. These openings must not be blocked or covered. The openings should never be connected; this behavior may cause damage to the radio. (iv) Users should also be advised that high-power radars are allocated as primary blocked by placing the product on a bed, sofa, rug or other similar surface. This • Use in specific environments: users (i.e. priority users) of the bands 5250 - 5350 MHz and 5650 - 5850 MHz and product should never be placed near or over a radiator or heat register, or in a built-in - The use of wireless adapters in hazardous locations is limited by the constraints that these radars could cause interference and/or damage to LE-LAN devices. installation unless proper ventilation is provided. posed by the safety directors of such environments. - Never push objects of any kind into this product through cabinet slots as they may - The use of wireless adapters on airplanes is governed by the Federal Aviation touch dangerous voltage points or shortout parts that could result in a fire or electric Administration (FAA). shock. Never spill liquid of any kind onto or into the product. - The use of wireless adapters in hospitals is restricted to the limits set forth by each - To avoid damage of internal components and to prevent battery leakage, do not hospital. place the product on a vibrating surface. The product comply with the FCC portable RF exposure limit set forth for an - Your device and its enhancements may contain small parts. Keep them out of the uncontrolled environment and are safe for intended operation as described in this reach of small children. manual. The further RF exposure reduction can be achieved if the product can be kept as far as possible from the user body or set the device to lower output power if Product servicing such function is available. Do not attempt to service this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks. Refer all servicing to qualified Explosive device proximity warning service personnel. Warning: Do not operate a portable transmitter (including this wireless Unplug this product from the wall outlet and refer servicing to qualified service adapter) near unshielded blasting caps or in an explosive environment unless personnel when: the transmitter has been modified to be qualified for such use. - The power cord or plug is damaged, cut or frayed. - Liquid was spilled into the product. Interference statement - The product was exposed to rain or water. This equipment has been tested and found to comply with the limits for a Class B - The product has been dropped or the case has been damaged. digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to - The product exhibits a distinct change in performance, indicating a need for service. provide reasonable protection against harmful interference in a residential - The product does not operate normally after following the operating instructions. installation. This equipment generates, uses, and can radiate radio frequency energy. Note: Adjust only those controls that are covered by the operating instructions, If the equipment is not installed and used in accordance with the instructions, the since improper adjustment of other controls may result in damage and will often equipment may cause harmful interference to radio communications. There is no require extensive work by a qualified technician to restore the product to normal guarantee, however, that such interference will not occur in a particular installation. If condition. this equipment does cause harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by taking one or more of the following measures: - Reorient or relocate the receiving antenna of the equipment experiencing the interference. - Increase the distance between the wireless adapter and the equipment experiencing the interference. - Connect the computer with the wireless adapter to an outlet on a circuit different from that to which the equipment experiencing the interference is connected. - Consult the dealer or an experienced radio/TV technician for help. Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.


Document Created: 2019-08-29 13:36:03
Document Modified: 2019-08-29 13:36:03
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC