Test Report DTS BT LE 4.0

FCC ID: HFS-QTAIR7

Test Report

Download: PDF
FCCID_2740781

FCC Test Report Report No.: RF150720C24-1 FCC ID: HFS-QTAIR7 Test Model: QTAIR7 Received Date: Jul. 20, 2015 Test Date: Aug. 04, 2015 ~ Aug. 07, 2015 Issued Date: Sep. 01, 2015 Applicant: Quanta Computer Inc. Address: No. 188, Wen Hwa 2nd RD., Kuei Shan Hsiang, Tao Yuan Shien, Taiwan Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan ( R.O.C ) Test Location: No. 19, Hwa Ya 2nd Rd, Wen Hwa Tsuen, Kwei Shan Hsiang, Taoyuan Hsien 333, Taiwan, R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF150720C24-1 Page No. 1 / 32 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ........................................................................................................................... 5 2 Summary of Test Results ........................................................................................................................... 6 2.1 Measurement Uncertainty ..................................................................................................................... 6 2.2 Modification Record .............................................................................................................................. 6 3 General Information ................................................................................................................................... 7 3.1 General Description of EUT .................................................................................................................. 7 3.2 Description of Test Modes..................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail .................................................................... 9 3.3 Description of Support Units ................................................................................................................ 11 3.3.1 Configuration of System under Test .......................................................................................... 11 3.4 General Description of Applied Standards ........................................................................................... 11 4 Test Types and Results ............................................................................................................................ 12 4.1 Radiated Emission and Bandedge Measurement .............................................................................. 12 4.1.1 Limits of Radiated Emission and Bandedge Measurement ..................................................... 12 4.1.2 Test Instruments ....................................................................................................................... 13 4.1.3 Test Procedures ........................................................................................................................ 14 4.1.4 Deviation from Test Standard ................................................................................................... 14 4.1.5 Test Set Up ............................................................................................................................... 15 4.1.6 EUT Operating Conditions ........................................................................................................ 15 4.1.7 Test Results .............................................................................................................................. 16 4.2 Conducted Emission Measurement .................................................................................................... 20 4.2.1 Limits of Conducted Emission Measurement ........................................................................... 20 4.2.2 Test Instruments ....................................................................................................................... 20 4.2.3 Test Procedures ........................................................................................................................ 20 4.2.4 Deviation from Test Standard ................................................................................................... 20 4.2.5 TEST SETUP............................................................................................................................ 21 4.2.6 EUT Operating Conditions ........................................................................................................ 21 4.2.7 Test Results .............................................................................................................................. 22 4.3 6dB Bandwidth Measurement ............................................................................................................. 24 4.3.1 Limits of 6dB Bandwidth Measurement .................................................................................... 24 4.3.2 Test Setup ................................................................................................................................. 24 4.3.3 Test Instruments ....................................................................................................................... 24 4.3.4 Test Procedure ......................................................................................................................... 24 4.3.5 Deviation fromTest Standard .................................................................................................... 24 4.3.6 EUT Operating Conditions ........................................................................................................ 24 4.3.7 Test Result ................................................................................................................................ 25 4.4 Conducted Output Power Measurement ............................................................................................ 26 4.4.1 Limits OF Conducted Output Power Measurement ................................................................. 26 4.4.2 Test Setup ................................................................................................................................. 26 4.4.3 Test Instruments ....................................................................................................................... 26 4.4.4 Test Procedures ........................................................................................................................ 26 4.4.5 Deviation from Test Standard ................................................................................................... 26 4.4.6 EUT Operating Conditions ........................................................................................................ 26 4.4.7 Test Results .............................................................................................................................. 26 4.5 Power Spectral Density Measurement ............................................................................................... 27 4.5.1 Limits of Power Spectral Density Measurement ....................................................................... 27 4.5.2 Test Setup ................................................................................................................................. 27 4.5.3 Test Instruments ....................................................................................................................... 27 4.5.4 Test Procedure ......................................................................................................................... 27 4.5.5 Deviation from Test Standard ................................................................................................... 27 4.5.6 EUT Operating Condition ......................................................................................................... 27 4.5.7 Test Results .............................................................................................................................. 28 Report No.: RF150720C24-1 Page No. 2 / 32 Report Format Version: 6.1.1

4.6 Conducted Out of Band Emission Measurement ............................................................................... 29 4.6.1 Limits of Conducted Out of Band Emission Measurement ....................................................... 29 4.6.2 Test Setup ................................................................................................................................. 29 4.6.3 Test Instruments ....................................................................................................................... 29 4.6.4 Test Procedure ......................................................................................................................... 29 4.6.5 Deviation from Test Standard ................................................................................................... 29 4.6.6 EUT Operating Condition ......................................................................................................... 29 4.6.7 TEST RESULTS ....................................................................................................................... 30 5 Pictures of Test Arrangements................................................................................................................ 31 Appendix – Information on the Testing Laboratories ................................................................................ 32 Report No.: RF150720C24-1 Page No. 3 / 32 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF150720C24-1 Original Release Sep. 01, 2015 Report No.: RF150720C24-1 Page No. 4 / 32 Report Format Version: 6.1.1

1 Certificate of Conformity Product: Tablet PC Brand: Verizon Test Model: QTAIR7 Sample Status: Identical Prototype Applicant: Quanta Computer Inc. Test Date: Aug. 04, 2015 ~ Aug. 07, 2015 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10:2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Sep. 01, 2015 Ivonne Wu / Supervisor Approved by : , Date: Sep. 01, 2015 Kay Wu / Supervisor Report No.: RF150720C24-1 Page No. 5 / 32 Report Format Version: 6.1.1

2 Summary of Test Results 47 CFRFCC Part 15, Subpart C (SECTION 15.247) LE FCC Test Item Result Remarks Clause Meet the requirement of limit. 15.207 AC Power Conducted Emission PASS |Minimum passing margin is —13.04dB at 0.98203MHz. Meet the requirement of limit. 15.205 & 209 Radiated Emissions PASS Minimum passing margin is —5.170B at 64.92MHz. 15.247(d) Band Edge Measurement PASS |Meet the requirement of limit. 15.247(d) Antenna Port Emission PASS |Meet the requirement of limit. 15.247(a)(2) 6dB bandwidth PASS |Meet the requirement of limit. 15.247(b) Conducted power PASS |Meet the requirement of limit. 15.247(e) Power Spectral Density PASS |Meet the requirement of limit. 15.203 Antenna Requirement PASS |No antenna connector is used. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT: The listed uncertainties are the worst case uncertainty for the entire range of measurement. Please note that the uncertainty values are provided for informational purposes only and are not used in determining the PASS/FAIL results. Expended Uncertainty Measurement Frequency (k=2) (®©) Conducted Emissions at mains ports 150kHz ~ 30MHz 2.44 dB 3S0MHz ~ 200MHz 2.93 dB Radiated Emissi 1 GH adiated Emissions up to GHz 200MHz ~1000MHz 2.95 dB 1GHz ~18GHz 2.26 dB adiated Emissi Radiated Emissions above 1 GHz GH 18GHz — 40GHz 1.94 db 2.2 Modification Record There were no modifications required for compliance. Report No.: RF150720024—1 Page No. 6 / 32 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT Product Tablet PC Brand Verizon Test Model QTAIR7 Status of EUT Identical Prototype 5.0Vdc (adapter) Power Supply Rating 3.85Vdc (Li-ion battery) Modulation Type GFSK Transfer Rate 1 Mbps Operating Frequency 2402 ~ 2480 MHz Number of Channel 40 Output Power 4.159 mW Antenna Type PIFA antenna with 1.3 dBi gain Accessory Device Refer to Note as below Data Cable Supplied Refer to Note as below Note: 1. The EUT contains following accessory devices. Product Brand Model Description Battery McNair MLP3276120-2P 3.85Vdc, 9100mAh LTE Module Marvell 88RF858 -- WLAN Chip Marvell 88W8887 -- 2. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF150720C24-1 Page No. 7 / 32 Report Format Version: 6.1.1

3.2 Description of Test Modes LE 4.0 40 channels are provided to this EUT: Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) Channel Freq. (MHz) 0 2402 10 2422 20 2442 30 2462 1 2404 11 2424 21 2444 31 2464 2 2406 12 2426 22 2446 32 2466 3 2408 13 2428 23 2448 33 2468 4 2410 14 2430 24 2450 34 2470 5 2412 15 2432 25 2452 35 2472 6 2414 16 2434 26 2454 36 2474 7 2416 17 2436 27 2456 37 2476 8 2418 18 2438 28 2458 38 2478 9 2420 19 2440 29 2460 39 2480 Report No.: RF150720C24-1 Page No. 8 / 32 Report Format Version: 6.1.1

3.2.1 Test Mode Applicability and Tested Channel Detail LE 4.0 EUT Configure Applicable To Description Mode RE1G RE<1G PLC APCM - √ √ √ √ - Where RE1G: Radiated Emission above 1GHz RE<1G: Radiated Emission below 1GHz PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement NOTE: The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Y-plane. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Available Channel Tested Channel Modulation Type Data Rate (Mbps) Mode - 0 to 39 0, 19, 39 GFSK 1 Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Available Channel Tested Channel Modulation Type Data Rate (Mbps) Mode - 0 to 39 39 GFSK 1 Power Line Conducted Emission Test: Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Available Channel Tested Channel Modulation Type Data Rate (Mbps) Mode - 0 to 39 39 GFSK 1 Report No.: RF150720C24-1 Page No. 9 / 32 Report Format Version: 6.1.1

Antenna Port Conducted Measurement: This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT Configure Available Channel Tested Channel Modulation Type Data Rate (Mbps) Mode - 0 to 39 0, 19, 39 GFSK 1 Test Condition: Applicable To Environmental Conditions Input Power Tested by RE1G 25deg. C, 65%RH 120Vac, 60Hz Gavin Wu RE<1G 25deg. C, 65%RH 120Vac, 60Hz Gavin Wu PLC 25deg. C, 68%RH 120Vac, 60Hz Toby Tian APCM 21deg. C, 60%RH 3.85Vdc Howard Kao Report No.: RF150720C24-1 Page No. 10 / 32 Report Format Version: 6.1.1

3.3 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. No. Product Brand Model No. Serial No. FCC ID A. Earphone Cotron Max-301 N/A N/A B. Adapter N/A N/A N/A N/A Note: 1. All power cords of the above support units are non-shielded (1.8m). 2. Item A acted as communication partners to transfer data. No. Signal Cable Description Of The Above Support Units 1. N/A 2. N/A Note: 1. All power cords of the above support units are non-shielded (1.8m). 3.3.1 Configuration of System under Test EUT (Power from AC Adapter) Earphone *Test Table 3.4 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) FCC Public Notice DA 00-705 558074 D01 DTS Meas Guidance v03r02 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. NOTE: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF150720C24-1 Page No. 11 / 32 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power: Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF150720C24-1 Page No. 12 / 32 Report Format Version: 6.1.1

4.1.2 Test Instruments Description & Due Date of Model No. Serial No. Date of Calibration Manaufacturer Calibration Test Receiver N9038A MY51210203 Jan. 21, 2015 Jan. 21, 2016 Agilent Spectrum Analyzer N9010A MY52220314 Sep. 03, 2014 Sep. 02, 2015 Agilent Spectrum Analyzer FSU43 101261 Dec. 10, 2014 Dec. 09, 2015 ROHDE & SCHWARZ BILOG Antenna VULB9168 9168-472 Feb. 04, 2015 Feb. 04, 2016 SCHWARZBECK HORN Antenna BBHA 9120 D 9120D-969 Feb. 09, 2015 Feb. 09, 2016 SCHWARZBECK HORN Antenna BBHA 9170 9170-480 Feb. 04, 2015 Feb. 04, 2016 SCHWARZBECK Loop Antenna EM-6879 269 Aug. 13, 2014 Aug. 12, 2015 Preamplifier EMC 012645 980115 Dec. 12, 2014 Dec. 11, 2015 EMCI Preamplifier EMC 184045 980116 Jan. 09, 2015 Jan. 08, 2016 EMCI Preamplifier EMC 330H 980112 Dec. 27, 2014 Dec. 26, 2015 EMCI Power Meter ML2495A 1232002 Sep. 17, 2014 Sep. 16, 2015 Anritsu Power Sensor MA2411B 1207325 Sep. 17, 2014 Sep. 16, 2015 Anritsu RF signal cable 309219/4 SUCOFLEX 104 Oct. 18, 2014 Oct. 17, 2015 HUBER+SUHNNER 2950114 RF signal cable SUCOFLEX 104 250130/4 Oct. 18, 2014 Oct. 17, 2015 HUBER+SUHNNER RF Coaxial Cable 8D-FB Cable-Ch10-01 Nov. 07, 2014 Nov. 06, 2015 Worken Software E3 NA NA NA BV ADT 6.120103 Antenna Tower MFA-440H NA NA NA MF Turn Table MFT-201SS NA NA NA MF Antenna Tower &Turn Table Controller MF-7802 NA NA NA MF Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Chamber 10. 3. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 4. The FCC Site Registration No. is 690701. 5. The IC Site Registration No. is IC7450F-10. Report No.: RF150720C24-1 Page No. 13 / 32 Report Format Version: 6.1.1

4.1.3 Test Procedures a. The EUT was placed on the top of a rotating table 0.8 meters (for below 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 3MHz for RMS Average (Duty cycle < 98%) for Average detection (AV) at frequency above 1GHz, then the measurement results was added to a correction factor (10 log(1/duty cycle)). 4. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 5. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF150720C24-1 Page No. 14 / 32 Report Format Version: 6.1.1

4.1.5 Test Set Up <Frequency Range below 1GHz> Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver <Frequency Range above 1GHz> Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Placed the EUT on the testing table. b. Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF150720C24-1 Page No. 15 / 32 Report Format Version: 6.1.1

4.1.7 Test Results ABOVE 1GHz DATA : EUT TEST CONDITION MEASUREMENT DETAIL CHANNEL Channel 0 EREQUENCY RANGE |1GHz ~ 25GHz INPUT POWER 120Vac, 60 Hz petEcton runction Average |Peak (PK)(AV) ENVIRONMENTAL conbpitions 25deg. C, 65%RH TESTED BY Gavin Wu ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION READ ANTENNA CABLE PREAMP ANTENNA| TABLE FReQ. LIMIT MARGIN on LeveL LeveL en FACTOR LOSS FACTOR HEIGHT ANGLE REMARK (dBu¥V/m) (dBuv) (dB/m) (dB) (dB) (om) |(Degree) 2338 35.99 42.65 54 —18.01 26.77 4.04 37.47 124 3 Average 2338 57.23 63.89 74 16.77 26.77 4.04 37.47 124 3 Peak 2402 102.28 108.8 26.91 4.09 37.52 124 3 Average 2402 103.08 109.6 26.91 4.09 37.52 124 3 Peak 2490 35.49 41.45 54 418.51 27.2 4.16 37.32 124 3 Average 2490 55.83 61.79 74 18. 17 27.2 4.16 37.32 124 3 Peak ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION READ ANTENNA CABLE PREAMP ANTENNA| TABLE FReQ. LIMIT MARGIN on LeveL LeveL en FACTOR LOSS FACTOR HEIGHT ANGLE REMARK (dBu¥V/m) (dBuv) (dB/m) (dB) (dB) (om) |(Degree) 2340 35.81 4249 54 418.19 26.77 4.04 37.49 104 281 Average 2340 57.09 63.77 74 416.91 26.77 4.04 37.49 104 281 Peak 2402 101.34 107.86 26.91 4.09 37.52 104 281 Average 2402 10216 d08.68 26.91 4.09 37.52 104 281 Peak 2498 35.48 41.37 54 18.52 27.2 4.16 37.25 104 281 Average 2498 57.81 63.7 74 41619 27.2 4.16 37.25 104 281 Peak REMARKS: 1. Emission Level = Read Level + Antenna Factor + Cable Loss — Preamp Factor Margin value = Emission level — Limit value 2. 2402MHz: Fundamental frequency. Report No.: RF150720024—1 Page No. 16 / 32 Report Format Version: 6.1.1

EUT TEST CONDITION MEASUREMENT DETAIL CHANNEL Channel 19 FREQUENCY RANGE 1GHz ~ 25GHz Peak (PK) INPUT POWER 120Vac, 60 Hz DETECTOR FUNCTION Average (AV) ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Gavin Wu CONDITIONS ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION READ ANTENNA CABLE PREAMP ANTENNA TABLE FREQ. LIMIT MARGIN LEVEL LEVEL FACTOR LOSS FACTOR HEIGHT ANGLE REMARK (MHz) (dBuV/m) (dB) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (cm) (Degree) 2360 35.41 42.04 54 -18.59 26.81 4.05 37.49 122 5 Average 2360 57.69 64.32 74 -16.31 26.81 4.05 37.49 122 5 Peak 2440 103.3 109.58 27.06 4.12 37.46 122 5 Average 2440 103.95 110.23 27.06 4.12 37.46 122 5 Peak 2494 36.21 42.1 54 -17.79 27.2 4.16 37.25 122 5 Average 2494 57.86 63.75 74 -16.14 27.2 4.16 37.25 122 5 Peak ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION READ ANTENNA CABLE PREAMP ANTENNA TABLE FREQ. LIMIT MARGIN LEVEL LEVEL FACTOR LOSS FACTOR HEIGHT ANGLE REMARK (MHz) (dBuV/m) (dB) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (cm) (Degree) 2330 35.21 41.92 54 -18.79 26.72 4.04 37.47 103 284 Average 2330 55.99 62.7 74 -18.01 26.72 4.04 37.47 103 284 Peak 2440 101.7 107.98 27.06 4.12 37.46 103 284 Average 2440 102.47 108.75 27.06 4.12 37.46 103 284 Peak 2494 35.79 41.68 54 -18.21 27.2 4.16 37.25 103 284 Average 2494 56.44 62.33 74 -17.56 27.2 4.16 37.25 103 284 Peak REMARKS: 1. Emission Level = Read Level + Antenna Factor + Cable Loss - Preamp Factor Margin value = Emission level – Limit value 2. 2440MHz: Fundamental frequency. Report No.: RF150720C24-1 Page No. 17 / 32 Report Format Version: 6.1.1

EUT TEST CONDITION MEASUREMENT DETAIL CHANNEL Channel 39 FREQUENCY RANGE 1GHz ~ 25GHz Peak (PK) INPUT POWER 120Vac, 60 Hz DETECTOR FUNCTION Average (AV) ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Gavin Wu CONDITIONS ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION READ ANTENNA CABLE PREAMP ANTENNA TABLE FREQ. LIMIT MARGIN LEVEL LEVEL FACTOR LOSS FACTOR HEIGHT ANGLE REMARK (MHz) (dBuV/m) (dB) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (cm) (Degree) 2372 34.48 41.05 54 -19.52 26.86 4.07 37.5 119 6 Average 2372 56.99 63.56 74 -17.01 26.86 4.07 37.5 119 6 Peak 2480 103.9 109.92 27.15 4.15 37.32 119 6 Average 2480 104.65 110.67 27.15 4.15 37.32 119 6 Peak 2490 41.72 47.68 54 -12.28 27.2 4.16 37.32 119 6 Average 2490 61.46 67.42 74 -12.54 27.2 4.16 37.32 119 6 Peak ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION READ ANTENNA CABLE PREAMP ANTENNA TABLE FREQ. LIMIT MARGIN LEVEL LEVEL FACTOR LOSS FACTOR HEIGHT ANGLE REMARK (MHz) (dBuV/m) (dB) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (cm) (Degree) 2358 35.32 41.95 54 -18.68 26.81 4.05 37.49 100 283 Average 2358 56.31 62.94 74 -17.69 26.81 4.05 37.49 100 283 Peak 2480 101.73 107.75 27.15 4.15 37.32 100 283 Average 2480 102.38 108.4 27.15 4.15 37.32 100 283 Peak 2484 39.93 45.95 54 -14.07 27.15 4.15 37.32 100 283 Average 2484 60.19 66.21 74 -13.81 27.15 4.15 37.32 100 283 Peak REMARKS: 1. Emission Level = Read Level + Antenna Factor + Cable Loss - Preamp Factor Margin value = Emission level – Limit value 2. 2480MHz: Fundamental frequency. Report No.: RF150720C24-1 Page No. 18 / 32 Report Format Version: 6.1.1

BELOW 1GHz WORST-CASE DATA: EUT TEST CONDITION MEASUREMENT DETAIL CHANNEL Channel 39 FREQUENCY RANGE 30MHz ~ 1GHz Peak (PK) INPUT POWER 120Vac, 60 Hz DETECTOR FUNCTION Quasi-peak (QP) ENVIRONMENTAL 25deg. C, 65%RH TESTED BY Gavin Wu CONDITIONS ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION READ ANTENNA CABLE PREAMP ANTENNA TABLE FREQ. LIMIT MARGIN LEVEL LEVEL FACTOR LOSS FACTOR HEIGHT ANGLE REMARK (MHz) (dBuV/m) (dB) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (cm) (Degree) 70.74 31.75 52.16 40 -8.25 10.53 0.85 31.79 140 59 Peak 121.18 32.89 52.54 43.5 -10.61 11.09 1.16 31.9 112 342 Peak 166.77 36.47 55.06 43.5 -7.03 12.05 1.13 31.77 108 146 Peak 182.29 34.07 54.06 43.5 -9.43 10.6 1.22 31.81 133 177 Peak 252.13 31.85 50.74 46 -14.15 11.54 1.49 31.92 135 347 Peak 275.41 28.7 46.84 46 -17.3 12.22 1.56 31.92 106 98 Peak ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION READ ANTENNA CABLE PREAMP ANTENNA TABLE FREQ. LIMIT MARGIN LEVEL LEVEL FACTOR LOSS FACTOR HEIGHT ANGLE REMARK (MHz) (dBuV/m) (dB) (dBuV/m) (dBuV) (dB/m) (dB) (dB) (cm) (Degree) 30 31.35 49.93 40 -8.65 11.98 0.58 31.14 110 97 Peak 41.64 34.59 51.42 40 -5.41 13.56 0.66 31.05 105 33 Peak 64.92 34.83 54.23 40 -5.17 11.35 0.84 31.59 123 86 Peak 122.15 25.45 45.05 43.5 -18.05 11.15 1.15 31.9 113 184 Peak 168.71 30.41 49.13 43.5 -13.09 11.86 1.16 31.74 121 235 Peak 255.04 25.5 44.27 46 -20.5 11.62 1.51 31.9 110 267 Peak REMARKS: Emission Level = Read Level + Antenna Factor + Cable Loss - Preamp Factor Margin value = Emission level – Limit value Report No.: RF150720C24-1 Page No. 19 / 32 Report Format Version: 6.1.1

4.2 Conducted Emission Measurement 4.2.1 Limits of Conducted Emission Measurement Conducted Limit (dBuV) Frequency (MHz) Quasi-peak Average 0.15 - 0.5 66 - 56 56 - 46 0.50 - 5.0 56 46 5.0 - 30.0 60 50 4.2.2 Test Instruments Description & Date Of Due Date Of Model No. Serial No. Manufacturer Calibration Calibration Test Receiver ESCS30 100288 Apr. 27, 2015 Apr. 26, 2016 ROHDE & SCHWARZ RF signal cable 5D-FB Cable-HYCO2-01 Dec. 26, 2014 Dec. 25, 2015 Woken LISN ROHDE & SCHWARZ ESH2-Z5 100100 Dec. 30, 2014 Dec. 29, 2015 (EUT) LISN ROHDE & SCHWARZ ESH3-Z5 100312 Jul. 21, 2015 Jul. 20, 2016 (Peripheral) Software BV ADT_Cond_ NA NA NA ADT V7.3.7.3 Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. The test was performed in HwaYa Shielded Room 2. 3. The VCCI Site Registration No. is C-2047. 4.2.3 Test Procedures a. The EUT was placed 0.4 meters from the conducting wall of the shielded room with EUT being connected to the power mains through a line impedance stabilization network (LISN). Other support units were connected to the power mains through another LISN. The two LISNs provide 50 ohm/ 50uH of coupling impedance for the measuring instrument. b. Both lines of the power mains connected to the EUT were checked for maximum conducted interference. c. The frequency range from 150kHz to 30MHz was searched. Emission levels under (Limit - 20dB) was not recorded. NOTE: All modes of operation were investigated and the worst-case emissions are reported. 4.2.4 Deviation from Test Standard No deviation. Report No.: RF150720C24-1 Page No. 20 / 32 Report Format Version: 6.1.1

4.2.5 TEST SETUP Vertical Ground Reference Plane /Test Receiver E_3 6 0 o o EUT M\“" 6 6 o o | | 80cm | | L1 L1 \ N Ho T rizontal Ground Referenc Plane e Note: 1.Suppo units were connect t s L rt ed o econd ISN. 2.Both of LISNs (AMN) are 80 cm from EUT and at least 80 from other units and other metal planes 4.2.6 EUT Operating Conditions Same as 4.1.6. Report No.: RF150720024—1 Page No. 21 / 32 Report Format Version: 6.1.1

4.2.7 Test Results CONDUCTED WORST—CASE DATA Detector Function . Frequency Range 150kHz ~ 30MHz & Resolution S:;'S;_Pee(aAtlgoglzl-/lz Bandwidth 9 f Environmental s o Input Power 120Vac, 60Hz Conditions 25°C, 65%RH Tested by Toby Tian Test Date 2015/877 Phase Of Power : Line (L) Frequency |Correction| Reading Value Emission Level Limit Margin No Factor (dBuyV) (dBuV) (dBuV) (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 0.15391 0.17 43.40 35.73 48.57 35.90 65.79 55.79 —22.22 —19.89 —— 0.23984 0.17 37.00 27.90 37.17 28.07 6210 5210 —24.93 —24.03 No 0.98203 0.23 41.24 32.73 4147 32.96 56.00 46.00 —14.53 —13.04 63 2.45313 0.29 37.08 29.68 37.37 29.97 56.00 46.00 —18.63 —16.03 & 3.36328 0.32 35.32 27.80 35.64 2812 56.00 46.00 —20.36 —17.88 &n 6 4.58203 0.36 84.25 26.73 34.61 27.09 56.00 46.00 —21.39 —18.91 Remarks: 1. Q.P. and AV. are abbreviations of quasi—peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level — Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value aBuy 110 1e se so to so so «o s 10 to o Report No.: RF150720024—1 Page No. 22 / 32 Report Format Version: 6.1.1

Detector Function . Frequency Range 150kHz ~ 30MHz & Resolution S:;S;_Pee(aAtlgoglzl-/lz Bandwidth 9 f Environmental s Input Power 120Vac, 60Hz Conditions 25°C, 65%RH Tested by Toby Tian Test Date 2015/877 Phase Of Power : Neutral (N) Frequency |Correction| Reading Value Emission Level Limit Margin No Factor (dBuyV) (dBuV) (dBuV) (dB) (MHz) (dB) Q.P. AV. Q.P. AV. Q.P. AV. Q.P. AV. 0.16172 0.18 39.27 28.85 39.45 29.03 65.38 55.38 —25.93 —26.35 —— 0.27109 0.19 33.92 24.58 34.11 24.77 61.08 51.08 —26.98 —26.32 No 0.96250 0.24 35.34 26.85 35.58 27.09 56.00 46.00 —20.42 —18.91 63 2.34375 0.31 31.21 24.42 31.52 24.73 56.00 46.00 —24.48 —21.27 & 3.41797 0.35 29.05 2211 2940 22.46 56.00 46.00 —26.60 —23.54 &n 6 4.55859 0.39 27.45 19.35 27.84 19.74 56.00 46.00 —28.16 —26.26 Remarks: 1. Q.P. and AV. are abbreviations of quasi—peak and average individually. 2. The emission levels of other frequencies were very low against the limit. 3. Margin value = Emission level — Limit value 4. Correction factor = Insertion loss + Cable loss 5. Emission Level = Correction Factor + Reading Value abuy 110 100 so an o so so «o s z0 10 o Report No.: RF150720024—1 Page No. 23 / 32 Report Format Version: 6.1.1

4.3 6dB Bandwidth Measurement 4.3.1 Limits of 6dB Bandwidth Measurement The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.3.2 Test Setup EUT SPECTRUM ANALYZER 10dB ATTENUATION PAD 4.3.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.3.4 Test Procedure a. Set resolution bandwidth (RBW) = 100kHz b. Set the video bandwidth (VBW) ≥ 3 x RBW, Detector = Peak. c. Trace mode = max hold. d. Sweep = auto couple. e. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.3.5 Deviation fromTest Standard No deviation. 4.3.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF150720C24-1 Page No. 24 / 32 Report Format Version: 6.1.1

4.3.7 Test Result 6dB Bandwidth Minimum Limit Channel Frequency (MHz) Pass / Fail (MHz) (MHz) 0 2402 702.07 0.5 Pass 19 2440 695.58 0.5 Pass 39 2480 687.36 0.5 Pass Spectrum Plot of Worst Value Report No.: RF150720C24-1 Page No. 25 / 32 Report Format Version: 6.1.1

4.4 Conducted Output Power Measurement 4.4.1 Limits OF Conducted Output Power Measurement For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt (30dBm) 4.4.2 Test Setup EUT Power Sensor Power Meter ATTENUATION PAD 4.4.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.4.4 Test Procedures A peak / average power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak / average power sensor. Record the power level. 4.4.5 Deviation from Test Standard No deviation. 4.4.6 EUT Operating Conditions Same as 4.3.6. 4.4.7 Test Results Frequency Peak Power Peak Power Limit Channel Pass / Fail (MHz) (mW) (dBm) (dBm) 0 2402 3.724 5.71 30 Pass 19 2440 3.733 5.72 30 Pass 39 2480 4.159 6.19 30 Pass Report No.: RF150720C24-1 Page No. 26 / 32 Report Format Version: 6.1.1

4.5 Power Spectral Density Measurement 4.5.1 Limits of Power Spectral Density Measurement The Maximum of Power Spectral Density Measurement is 8dBm. 4.5.2 Test Setup EUT SPECTRUM 10dB ATTENUATION ANALYZER PAD 4.5.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.5.4 Test Procedure a. Set the RBW = 3 kHz, VBW =10 kHz, Detector = peak. b. Sweep time = auto couple, Trace mode = max hold, allow trace to fully stabilize. c. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. 4.5.5 Deviation from Test Standard No deviation. 4.5.6 EUT Operating Condition Same as 4.3.6 Report No.: RF150720C24-1 Page No. 27 / 32 Report Format Version: 6.1.1

4.5.7 Test Results Frequency PSD Limit Channel Pass / Fail (MHz) (dBm/3kHz) (dBm/3kHz) 0 2402 -8.70 8 Pass 19 2440 -8.40 8 Pass 39 2480 -8.17 8 Pass Spectrum Plot of Worst Value Report No.: RF150720C24-1 Page No. 28 / 32 Report Format Version: 6.1.1

4.6 Conducted Out of Band Emission Measurement 4.6.1 Limits of Conducted Out of Band Emission Measurement Below –20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.6.2 Test Setup EUT SPECTRUM 10dB ATTENUATION ANALYZER PAD 4.6.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.6.4 Test Procedure MEASUREMENT PROCEDURE REF 1. Set the RBW = 100 kHz. 2. Set the VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. MEASUREMENT PROCEDURE OOBE 1. Set RBW = 100 kHz. 2. Set VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep = auto couple. 5. Trace Mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum amplitude level. 4.6.5 Deviation from Test Standard No deviation. 4.6.6 EUT Operating Condition Same as 4.3.6 Report No.: RF150720C24-1 Page No. 29 / 32 Report Format Version: 6.1.1

4.6.7 TEST RESULTS CH 0 CH 19 CH 39 CH 0 Band Edge CH 39 Band Edge Report No.: RF150720C24-1 Page No. 30 / 32 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF150720C24-1 Page No. 31 / 32 Report Format Version: 6.1.1

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF Lab/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF150720C24-1 Page No. 32 / 32 Report Format Version: 6.1.1


Document Created: 2015-09-03 10:33:12
Document Modified: 2015-09-03 10:33:12
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC