Test Report - SAR(Appendix C-2)_R01

FCC ID: HFS-M99

RF Exposure Info

Download: PDF
FCCID_3177738

Calibration Laboratory of S Schweizerischer Kalibrierdienst Schmid & Partner C Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client B.V.ADT (Auden) Certificate No: EX3—3971_Mar16 CALIBRATION CERTIFICATE _ Object EX3DV4 — SN:3971 Calibration procedure(s) QA CAL—01.v9, QA CAL—14.v4, QA CAL—23.v5, QA CAL—25.v6 Calibration procedure for dosimetric E—field probes Calibration date: March 23, 2016 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (Sl). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70% Calibration Equipment used (M&TE critical for calibration) Primary Standards ID Cal Date (Certificate No.) Scheduled Calibration Power meter E4419B GB41293874 01—Apr—15 (No. 217—02128) Mar—16 Power sensor E4412A MY41498087 01—Apr—15 (No. 217—02128) Mar—16 Reference 3 dB Attenuator SN: $5054 (3c) 01—Apr—15 (No. 217—02129) 0_ Mar—16 Reference 20 dB Attenuator SN: $5277 (20%) 01—Apr—15 (No. 217—02132) Mar—16 Reference 30 dB Attenuator SN: $5129 (30b) 01—Apr—15 (No. 217—02133) Mar—16 Reference Probe ES3DV2 SN: 3013 31—Dec—15 (No. ES3—3013_Dec15) Dec—16 DAE4 SN: 660 23—Dec—15 (No. DAE4—660_Dec15) Dec—16 Secondary Standards ID Check Date (in house) Scheduled Check RF generator HP 8648C US3642U01700 4—Aug—99 (in house check Apr—13) In house check: Apr—16 Network Analyzer HP 8753E US37390585 18—Oct—01 (in house check Oct—15) In house check: Oct—16 Name Function Signature Calibrated by: Jeton Kastrati Laboratory Technician e Approved by: Katfa Pokovic Technical Manager /m Issued: March 28, 2016 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: EX3—3971_Mar16 Page 1 of 11

Calibration Laboratory of e\“\“\v_\i_l_/“;""/., § Schweizerischer Kalibrierdienst Schmid & Partner ;\;Eé—-//mf C Service suisse d‘étalonnage Engineering AG ez y>o 5 Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland T rlfi.\.\u“‘\\‘ Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid NORMx,y,2z sensitivity in free space Convr sensitivity in TSL / NORMx,y,z DCP diode compression point CF crest factor (1/duty_cycle) of the RF signal A, B, C, D modulation dependent linearization parameters Polarization 4 p rotation around probe axis Polarization 8 8 rotation around an axis that is in the plane normal to probe axis (at measurement center), iie., 8 = 0 is normal to probe axis Connector Angle information used in DASY system to align probe sensor X to the robot coordinate system Calibration is Performed According to the Following Standards: IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Methods Applied and Interpretation of Parameters: NORMx,y,z: Assessed for E—field polarization 8 = 0 (f < 900 MHz in TEM—cell; f > 1800 MHz: R22 waveguide). NORMx,y,z are only intermediate values, i.e., the uncertainties of NORMx,y,z does not affect the E*—field uncertainty inside TSL (see below ConvF). NORM(Px,y,z = NORMx,y,z * frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency response is included in the stated uncertainty of ConvF. DCPx,y,z: DCP are numerical linearization parameters assessed based on the data of power sweep with CW signal (no uncertainty required). DCP does not depend on frequency nor media. PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal characteristics Ax,y,z; Bx,y,z; Cx,y,z; Dx,y,z; VRx,y,z: A, B, C, D are numerical linearization parameters assessed based on the data of power sweep for specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across the diode. ConvF and Boundary Effect Parameters: Assessed in flat phantom using E—field (or Temperature Transfer Standard for f < 800 MHz) and inside waveguide using analytical field distributions based on power measurements for f > 800 MHz. The same setups are used for assessment of the parameters applied for boundary compensation (alpha, depth) of which typical uncertainty values are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx,y,z * ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in DASY version 4.4 and higher which allows extending the validity from + 50 MHz to + 100 MHz. Spherical isotropy (3D deviation from isotropy): in a field of low gradients realized using a flat phantom exposed by a patch antenna. Sensor Offset: The sensor offset corresponds to the offset of virtual measurement center from the probe tip {on probe axis). No tolerance required. Connector Angle: The angle is assessed using the information gained by determining the NORMx (no uncertainty required). Certificate No: EX3—3971_Mar16 Page 2 of 11

EX3DV4 — SN:3971 March 23, 2016 Probe EX3DV4 SN:3971 Manufactured: December 30, 2013 Calibrated: March 23, 2016 Calibrated for DASY/EASY Systems (Note: non—compatible with DASY2 system!) Certificate No: EX3—3971_Mar16 Page 3 of 11

EX3DV4— SN:3971 March 23, 2016 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3971 Basic Calibration Parameters Sensor X Sensor Y Sensor Z Unc (k=2) Norm (pV/.(_V/m)Z)A 0.41 0.52 0.50 £10.1 % DCP ({mV)? 104.0 101.0 97.3 Modulation Calibration Parameters UID Communication System Name A B C D VR Unc® dB dBvuV dB myVy (Kk=2) 0 CW X 0.0 0.0 1.0 0.00 189.2 +3.5 % Y 0.0 0.0 1.0 172.3 Z 0.0 0.0 1.0 171.8 The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. * The uncertainties of Norm X,Y,Z do not affect the E®—field uncertainty inside TSL (see Pages 5 and 6). ® Numerical linearization parameter: uncertainty not required. © Uncertainty is determined using the max. deviation from linear response applying rectangular distribution and is expressed for the square of the field value. Certificate No: EX3—3971_Mar16 Page 4 of 11

EX3DV4— SN:3971 March 23, 2016 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3971 Calibration Parameter Determined in Head Tissue Simulating Media Relative Conductivity Depth ° Unc f (MHz)° |_Permittivity® (S/m)" ConvFX ConvF Y ConvFZ Aipha® _(mm) (k=2) 750 41.9 0.89 10.30 10.30 10.30 0.50 0.83 +12.0 % 835 41.5 0.90 10.09 10.09 10.09 0.46 0.80 +12.0 % 900 41.5 0.97 9.83 9.83 9.83 0.35 0.97 +12.0 % 1450 40.5 1.20 8.60 8.60 8.60 0.36 0.90 +12.0 % 1640 40.3 1.29 8.43 8.43 8.43 0.32 0.80 £12.0 % 1750 40.1 1.37 8.43 8.43 8.43 0.33 0.80 £+12.0 % 1900 40.0 1.40 8.15 815 8.15 0.27 0.99 £12.0 % 2000 40.0 1.40 8.19 8.19 8.19 0.36 0.80 +12.0 % 2300 39.5 1.67 7.75 7.75 7.75 0.33 0.81 +12.0 % 2450 39.2 1.80 7.A6 7.A6 7.46 0.32 0.84 +12.0 % 2600 39.0 1.96 716 716 7.16 0.32 0.87 +12.0 % 3500 37.9 2.91 6.94 6.94 6.94 0.39 1.09 +13.1 % 5200 36.0 4.66 5.34 5.34 5.34 0.30 1.80 +131 % 5300 35.9 4.76 5.00 5.00 5.00 0.35 1.80 £131 % 5500 35.6 4.96 4.94 4.94 4.94 0.40 1.80 £13.1 % 5600 35.5 5.07 4.66 4.66 4.66 0.45 1.80 £#13.1 % 5800 35.3 5.27 4.75 4.75 4.75 0.40 1.80 +131 % © Frequency validity above 300 MHz of + 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS of the ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. Frequency validity below 300 MHz is + 10, 25, 40, 50 and 70 MHz for ConvrF assessments at 30, 64, 128, 150 and 220 MHz respectively. Above 5 GHz frequency validity can be extended to + 110 MHz. " At frequencies below 3 GHz, the validity of tissue parameters (e and 0) can be relaxed to + 10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (s and 0) is restricted to + 5%. The uncertainty is the RSS of the ConvF uncertainty for indicated target tissue parameters. © Alpha/Depth are determined during calibration. SPEAG warrants that the remaining deviation due to the boundary effect after compensation is always less than + 1% for frequencies below 3 GHz and below + 2% for frequencies between 3—6 GHz at any distance larger than half the probe tip diameter from the boundary. Certificate No: EX3—3971_Mar16 Page 5 of 11

EX3DV4— SN:3971 March 23, 2016 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3971 Calibration Parameter Determined in Body Tissue Simulating Media Relative Conductivity Depth " Unc f(MHz)° Permittivity® (S/im)" ConvF X ConvF Y ConvFZ Alpha® _(mm) (k=2) 750 55.5 0.96 10.00 10.00 10.00 0.49 0.86 +12.0 % 835 55.2 0.97 9.89 9.89 9.89 0.46 0.80 +12.0 % 900 55.0 1.05 9.92 9.92 9.92 0.47 0.80 +12.0 % 1450 54.0 1.30 8.57 8.57 8.57 0.31 0.80 +12.0 % 1640 53.8 1.40 8.48 8.48 8.48 0.25 1.06 £12.0 % 1750 53.4 1.49 8.08 8.08 8.08 0.37 0.80 +12.0 % 1900 53.3 1.52 7.85 7.85 7.85 0.40 0.86 +12.0 % 2000 53.3 1.52 7.98 7.98 7.98 0.37 0.82 +12.0 % 2300 52.9 1.81 7.39 7.39 7.39 0.34 0.80 +12.0 % 2450 52.7 1.95 7.24 7.24 7.24 0.36 0.80 +12.0 % 2600 52.5 216 6.88 6.88 6.88 0.25 0.90 +12.0 % 3500 51.3 3.31 6.69 6.69 6.69 0.36 1.21 £13.1 % 5200 49.0 5.30 4.54 4.54 4.54 0.50 1.90 £13.1 % 5300 48.9 5.42 4.26 4.26 4.26 0.50 1.90 +13.1 % 5500 48.6 5.65 3.95 3.95 3.95 0.55 1.90 £13.1 % 5600 48.5 5.77 3.68 3.68 3.68 0.60 1.90 *13.1 % 5800 48.2 6.00 3.90 3.90 3.90 0.60 1.90 £13.1 % © Frequency validity above 300 MHz of + 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS of the ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. Frequency validity below 300 MHz is + 10, 25, 40, 50 and 70 MHz for ConvF assessments at 30, 64, 128, 150 and 220 MHz respectively. Above 5 GHz frequency validity can be extended to + 110 MHz. " At frequencies below 3 GHz, the validity of tissue parameters (s and 0) can be relaxed to + 10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (e and 0) is restricted to + 5%. The uncertainty is the RSS of the ConvF uncertainty for indicated target tissue parameters. © Alpha/Depth are determined during calibration. SPEAG warrants that the remaining deviation due to the boundary effect after compensation is always less than + 1% for frequencies below 3 GHz and below + 2% for frequencies between 3—6 GHz at any distance larger than half the probe tip diameter from the boundary. Certificate No: EX3—3971_Mar16 Page 6 of 11

EX3DV4— SN:3971 March 23, 2016 Frequency Response of E—Field (TEM—Cell:ifi110 EXX, Waveguide: R22) Aud PmformmnninmsmeJprrommmmmnteioesfrsmmmmomincssorovifpncnssenmmninssseifyrnes Frequency response (normalized) 11— h s o , . oo revtressreessss J, ..... TPTITPTTI i _6 % _4 P p *# 4 € TT T1 1 i | L _| J__; ; 1 j I I I 0 500 1000 1500 2000 2500 _I'EIV’. L* R22 Uncertainty of Frequency Response of E—field: + 6.3% (k=2) Certificate No: EX3—3971_Mar16 Page 7 of 11

EX3DV4— SN:3971 March 23, 2016 Receiving Pattern (¢), 9 = 0° f=600 MHz,TEM f=1800 MHz,R22 _‘3{1 ao r a 13 \\,\45 \.-A r a 5 5 ‘ fo . | Foct C + o> > & 2* — + f [ 4. 3 i 180 +% *J a ow t & 6 180 «+ t 0 & . 22 *» Doo o4 0s os t D 04 06 08 ; + * *e .| d * / ? . 1 + 1 0+ % % % 8. ®* / 26\ " Serczzcar"* 35 295 s R 3% 270 . ® © © & 6 ® © © Tot X Y Z Tot X Y Z 05 i J j 5 | f j j f “-6-' 00 ’-8.—:3‘5;1“4"——':—.—'-%1 a .4—1!”:"4.4-..’:._4_—07‘::}3—3&'—“.‘:&'— ""i‘.“.“it'—".’"" LE i I t I 1 1 () §H]e en nnnnbre n n en en en en snn edee en n n n en en n a ne n ne n the en snn n en n n n nn nn n en n drnn n en en n en n n en n n n thne n en n en n en n en en n n en bnr n en n n n nn n n en en en dn n cce ce e+ 1y P pupp f ho p y d p l p d p db t g ob ob uy 1b d G 1 {i I 1 | T [ I =150 ~100 —50 U 50 100 150 Roll [*] : I @ 10%2 600 MHz 1850-de 25@H2 Uncertainty of Axial Isotropy Assessment: £ 0.5% (k=2) Certificate No: EX3—3971_Mar16 Page 8 of 11

EX3DV4— SN:3971 March 23, 2016 Dynamic Range f(SARneaqd) (TEM cell , feyai= 1900 MHz) Input Signal [uV] HCOLPHR CR OTO— T 13 : perendt=r $ H ]__ 108 102 10 10 10 103 SAR [mWicm3] _*] compensated not compensated Error [dB] 103 102 1|0'1 1|0° SAR [mW/cm3] _* not compensated compensated Uncertainty of Linearity Assessment: £ 0.6% (k=2) Certificate No: EX3—3971_Mar16 Page 9 of 11

EX3DV4— SN:3971 March 23, 2016 Conversion Factor Assessment f= 900 MHz,WGLS RQ (H_convF) f= 1750 MHz,WGLS R22 (H_convF) 4.0 ‘ 40 as! | . \-, 259| * so t * o x | . 204 % as| § | = 20 § 15 & _ & 15 | | 10 10 | | & 5 0.5 Eu — .. C 1—104 iot ..- 4224 2ccil ibace P 0 11 l lL4 Bs en e 4 ue o figle L1 L4 o s 10 15 20 2s 30 35 40 5 10 16 zo 25 30 35 s0 is 2 [mm] + + z [mm} analytical measured analytica‘ measured Deviation from Isotropy in Liquid Error (6, 8), f = 900 MHz Deviation 1.0 —0.8 —0.6 —0.4 —0.2 0.0 0.2 0.4 0.6 0.8 1.0 Uncertainty of Spherical Isotropy Assessment: £ 2.6% (k=2) Certificate No: EX3—3971_Mar16 Page 10 of 11

EX3DV4— SN:3971 March 23, 2016 DASY/EASY — Parameters of Probe: EX3DV4 — SN:3971 Other Probe Parameters Sensor Arrangement Triangular Connector Angle (°) 73.8 Vechanical Surface Detection Mode enabled Optical Surface Detection Mode disabled Probe Overall Length 337 mm Probe Body Diameter 10 mm Tip Length 9 mm Tip Diameter 2.5 mm Probe Tip to Sensor X Calibration Point 1 mm Probe Tip to Sensor Y Calibration Point 1 mm Probe Tip to Sensor Z Calibration Point 1 mm Recommended Measurement Distance from Surface 1.4 mm Certificate No: EX3—3971_Mar16 Page 11 of 11

Calibration Laboratory of Schmid & Partner S Schweizerischer Kalibrierdienst Service suisse d‘étalonnage Engineering AG C Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client BV ADT (Auden) Certificate No: ET3—1790_Jun16 CALIBRATION CERTIFICATE Object ET3DV6 — SN:1790 Calibration procedure(s) QA CAL—01.v9, QA CAL—23.v5, QA CAL—25.v6 Calibration procedure for dosimetric E—field probes Calibration date: June 24, 2016 This calibration certificate documents the traceability to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70%. Calibration Equipment used (M&TE critical for calibration) Primary Standards ID Cal Date(Certificate No.) Scheduled Calibration Power meter NRP SN: 104778 06—Apr—16 (No. 217—02288/02289) Apr—17 Power sensor NRP—Z91 SN: 103244 06—Apr—16 (No. 217—02288) Apr—17 Power sensor NRP—Z291 SN: 103245 06—Apr—16 (No. 217—02289) Apr—17 Reference 20 dB Attenuator SN: $5277 (20%) 05—Apr—16 (No. 217—02293) Apr—17 Reference Probe ES3DV2 SN: 3013 31—Dec—15 (No. ES3—3013_Dec15) Dec—16 DAE4 SN: 660 23—Dec—15 (No. DAE4—660_Dec15) Dec—16 Secondary Standards ID Check Date (in house) Scheduled Check Power meter E4419B SN: GB41293874 06—Apr—16 (in house check Jun—16) In house check: Jun—18 Power sensor E4412A SN: MY41498087 06—Apr—16 (in house check Jun—16) In house check: Jun—18 Power sensor E4412A SN: 000110210 06—Apr—16 (in house check Jun—16) In house check: Jun—18 RF generator HP 8648C SN: US3642U01700 04—Aug—99 (in house check Jun—16) In house check: Jun—18 Network Analyzer HP 8753E SN: US37390585 18—Oct—01 (in house check Oct—15) In house check: Oct—16 Name Function Signature Calibrated by: Leif Klysner Laboratory Technician W%’ Approved by: Katja Pokovic Issued: June 27, 2016 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: ET3—1790_Jun16 Page 1 of 11

Calibration Laboratory of w¥ \A/ 74 Schweizerischer Kalibrierdienst Schmid & Partner ;E\\:-\L:///:|!5} 2 Service suisse d‘étalonnage Engineering AG 2 —LM Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland ”:x,fi‘\? S Swiss Calibration Service alrnided Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid NORMx,y,z sensitivity in free space ConvrF sensitivity in TSL / NORMx,y,z DCP diode compression point CF crest factor (1/duty_cycle) of the RF signal A, B, C, D modulation dependent linearization parameters Polarization q p rotation around probe axis Polarization 8 8 rotation around an axis that is in the plane normal to probe axis (at measurement center), ie., 8 = 0 is normal to probe axis Connector Angle information used in DASY system to align probe sensor X to the robot coordinate system Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) 1EC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Methods Applied and Interpretation of Parameters: NORMx,y,z: Assessed for E—field polarization 8 = 0 (f < 900 MHz in TEM—cell; f > 1800 MHz: R22 waveguide). NORMx,y,z are only intermediate values, i.e., the uncertainties of NORMx,y,z does not affect the E*—field uncertainty inside TSL (see below ConvF). NORM(F)x,y,z = NORMx,y,z * frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency response is included in the stated uncertainty of ConvF. DCPx,y,z: DCP are numerical linearization parameters assessed based on the data of power sweep with CW signal (no uncertainty required). DCP does not depend on frequency nor media. PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal characteristics Ax,y,z; Bx,y,z; Cx,y,z; Dx,y,z; VRx,y,z: A, B, C, D are numerical linearization parameters assessed based on the data of power sweep for specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across the diode. ConvF and Boundary Effect Parameters: Assessed in flat phantom using E—field (or Temperature Transfer Standard for f < 800 MHz) and inside waveguide using analytical field distributions based on power measurements for f > 800 MHz. The same setups are used for assessment of the parameters applied for boundary compensation (alpha, depth) of which typical uncertainty values are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx,y,z * ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in DASY version 4.4 and higher which allows extending the validity from + 50 MHz to + 100 MHz. Spherical isotropy (3D deviation from isotropy): in a field of low gradients realized using a flat phantom exposed by a patch antenna. Sensor Offset: The sensor offset corresponds to the offset of virtual measurement center from the probe tip (on probe axis). No tolerance required. Connector Angle: The angle is assessed using the information gained by determining the NORMx (no uncertainty required). Certificate No: ET3—1790_Jun16 Page 2 of 11

ET3DV6 — SN:1790 June 24, 2016 Probe ET3DVG6 SN:1790 Manufactured: May 28, 2003 Calibrated: June 24, 2016 Calibrated for DASY/EASY Systems (Note: non—compatible with DASY2 system!) Certificate No: ET3—1790_Jun16 Page 3 of 11

ET3DV6— SN:1790 June 24, 2016 DASY/EASY — Parameters of Probe: ET3DV6 — SN:1790 Basic Calibration Parameters Sensor X Sensor Y Sensor Z Unc (k=2) Norm (uV/(V/m)‘)* 216 2.10 1.75 £10.1 % DCP (mV)" 100.0 100.1 99.6 Modulation Calibration Parameters UID Communication System Name A B C D VR Unc® dB dBvuV dB mV (Kk=2) 0 CW xX 0.0 0.0 1.0 0.00 290.6 #3.5% Y 0.0 0.0 1.0 278.4 Z 0.0 0.0 1.0 263.0 The reported uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. *A The uncertainties of Norm X,Y,Z do not affect the E*—field uncertainty inside TSL (see Pages 5 and 6). ® Numerical linearization parameter: uncertainty not required. & Uncertainty is determined using the max. deviation from linear response applying rectangular distribution and is expressed for the square of the field value. Certificate No: ET3—1790_Jun16 Page 4 of 11

ET3DV6— SN:1790 June 24, 2016 DASY/EASY — Parameters of Probe: ET3DV6 — SN:1790 Calibration Parameter Determined in Head Tissue Simulating Media Relative Conductivity Depth ° Unc f (MHz)© |_Permittivity® (S/m)" ConvFX ConvF Y¥ ConvFZ Aipha® _(mm) (k=2) 750 41.9 0.89 7.03 7.03 7.03 0.37 2.48 + 12.0 % 835 41.5 0.90 6.71 6.71 6.71 0.37 2.37 +12.0 % 900 41.5 0.97 6.53 6.53 6.53 0.38 2.42 +12.0 % 1640 40.3 1.29 5.70 5.70 5.70 0.53 2.61 +12.0 % 1750 40.1 1.37 5.57 5.57 5.57 0.65 2.25 +12.0 % 1900 40.0 1.40 5.35 5.35 5.35 0.80 2.08 + 12.0 % 2000 40.0 1.40 5.25 5.25 5.25 0.80 2.05 + 12.0 % © Frequency validity above 300 MHz of + 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS of the ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. Frequency validity below 300 MHz is + 10, 25, 40, 50 and 70 MHz for ConvF assessments at 30, 64, 128, 150 and 220 MHz respectively. Above 5 GHz frequency validity can be extended to + 110 MHz. " At frequencies below 3 GHz, the validity of tissue parameters (s and a) can be relaxed to + 10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (s and 0) is restricted to + 5%. The uncertainty is the RSS of the ConvF uncertainty for indicated target tissue parameters. © Alpha/Depth are determined during calibration. SPEAG warrants that the remaining deviation due to the boundary effect after compensation is always less than + 1% for frequencies below 3 GHz and below + 2% for frequencies between 3—6 GHz at any distance larger than half the probe tip diameter from the boundary. Certificate No: ET3—1790_Jun16 Page 5 of 11

ET3DV6— SN:1790 June 24, 2016 DASY/EASY — Parameters of Probe: ET3DVG6 — SN:1790 Calibration Parameter Determined in Body Tissue Simulating Media Relative Conductivity Depth ° Unc f(MHz)° |_Permittivity® (S/im)" ConvFX ConvF Y ConvFZ Aipha® _({mm) (k=2) 750 55.5 0.96 6.44 6.44 6.44 0.40 2.24 +12.0 % 835 55.2 0.97 6.37 6.37 6.37 0.33 2.57 +12.0 % 900 55.0 1.05 6.35 6.35 6.35 0.40 2.40 +12.0 % 1640 53.8 1.40 5.26 5.26 5.26 0.63 2.79 +12.0 % 1750 53.4 1.49 4.94 4.94 4.94 0.80 2.37 + 12.0 % 1900 53.3 1.52 4.74 4.74 4.74 0.80 2.31 +12.0 % 2000 53.3 1.52 4.85 4.85 4.85 0.80 2.26 +12.0 % © Frequency validity above 300 MHz of + 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS of the ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. Frequency validity below 300 MHz is + 10, 25, 40, 50 and 70 MHz for ConvF assessments at 30, 64, 128, 150 and 220 MHz respectively. Above 5 GHz frequency validity can be extended to + 110 MHz. " At frequencies below 3 GHz, the validity of tissue parameters (s and 0) can be relaxed to + 10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (e and 0) is restricted to + 5%. The uncertainty is the RSS of the ConvF uncertainty for indicated target tissue parameters. © Alpha/Depth are determined during calibration. SPEAG warrants that the remaining deviation due to the boundary effect after compensation is always less than + 1% for frequencies below 3 GHz and below + 2% for frequencies between 3—6 GHz at any distance larger than half the probe tip diameter from the boundary. Certificate No: ET3—1790_Jun16 Page 6 of 11

ET3DV6é— SN:1790 June 24, 2016 Frequency Response of E—Field (TEM—Cell:ifi110 EXX, Waveguide: R22) 1.5 14_: ...... Frequency response ({normalized) OemmIerremmmimmEmmPoommmmmmmizenPronmmmrmmmnemmmirnilmnsmmmmmsmsniiie:h : $0 § (5 9L | Lo _4 I |__| | I I I | 0 500 1000 1500 2000 2500 [MHz] Uncertainty of Frequency Response of E—field: + 6.3% (k=2) Certificate No: ET3—1790_Jun16 Page 7 of 11

ET3DV6— SN:1790 June 24, 2016 Receiving Pattern (¢), 9 = 0° f=600 MHz,TEM f=1800 MHz,R22 90 x1 i/" — * 186 . 46 135 45 w *A +A » * . : " ? 1 & / * A © 7 1 ¥o a Lo + * . I 4 a + & * ." | | ® }* san + *4 w «+ 0 180. ++ ie ® 0 ; 2 M 6. 02 04 o6 08 0; IY ** o2 o4 06 os « a s *"% + * * ©o% \q *~/* v t1 % c4 E\‘ * *o% l \ 4 + / > % / » \ L « / / » O + \ . * > 228\ 5 315 28\ /s \ — ~, 4+ 78 _ m aro ar ~~. P + & © & © # @ & & Tot X Y¥ Z Tot X Y Z Error [dB] 0 0 —;—Mflfr-“” #+—4 H‘#m4"m—.—mflwm_&w~ +0 45— «obecucccr se cce 66e en 6t Breweree neae en 44 +4 830E 694 0e n e rk en en n t ie e d e en ne en en na ce e en n nn tb be enb ib rr es se en e rrnerean en enc nener esn n en dan caeee snn T 0 150 Roll ["] 18|J'fi!KJHz 25(fi1HZ Uncertainty of Axial Isotropy Assessment: £ 0.5% (k=2) Certificate No: ET3—1790_Jun16 Page 8 of 11

ET3DVE6— SN:1790 June 24, 2016 Dynamic Range f(SARneaq) (TEM cell , feyq= 1900 MHz) A SESHEEESEEHHHROEREASKTRHTRIRESENEIIHAKGcce en nene nerapererneeenibernerifrrnnnnncvnensonerngrassrancances y 105_. ................................... : ' ...... # Input Signal [uV] 104 — a! ‘ x/ / ABmm /4 l'. * 101 j j is 4 { :{ 10 108 102 10 10° 10 10 108 8 SAR [mW/cm3] 4 not compensated compensated 2 44 o k — + LJ f a1— L.+ —2 I i 104 103 102 101 1090 101 102 103 SAR [mW/em3] _* | not compensated compensated Un certainty of Linearity Assessment: £ 0.6% (k=2) Certificate No: ET3—1790_Jun16 Page 9 of 11

ET3DVE6— SN:1790 June 24, 2016 Conversion Factor Assessment f= 835 MHz,WGLS R9 (H_convF) f= 1900 MHz,WGLS R22 (H_convFr) 40— | 3 ‘ 40— §00 0. 18 i | % & m * & in % $ g 15 !5_ 10 ) 1108 | os‘ s| * 7 % ‘\“‘_, 19— pd Einiges=— Vs si0 t 3<s tooenprepecag p es —— css koe—alild £44 ul L4 0 5 10 15 20 2 31 35 40 0 & 10 15 20 25 30 36 40 ce 2 [mm] e :ej z [mm] a analytical measured analytica measured Deviation from Isotropy in Liquid Error (¢, 9), f = 900 MHz Deviation —1.0 —0.8 —0.6 —0.4 —0.2 0.0 0.2 0.4 0.86 0.8 1.0 Uncertainty of Spherical Isotropy Assessment: + 2.6% (k=2) Certificate No: ET3—1790_Jun16 Page 10 of 11

ET3DV6— SN:1790 June 24, 2016 DASY/EASY — Parameters of Probe: ET3DVG6 — SN:1790 Other Probe Parameters Sensor Arrangement Triangular Connector Angle (°) —18.8 Mechanical Surface Detection Mode enabled Optical Surface Detection Mode disabled Probe Overall Length 337 mm Probe Body Diameter 10 mm Tip Length 10 mm Tip Diameter 6.8 mm Probe Tip to Sensor X Calibration Point 2.7 mm Probe Tip to Sensor Y Calibration Point 2.7 mm Probe Tip to Sensor Z Calibration Point 2.7 mm Recommended Measurement Distance from Surface 4 mm Certificate No: ET3—1790_Jun16 Page 11 of 11

Calibration Laboratory of S Schweizerischer Kalibrierdienst Schmid & Partner fas Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Client Auden Certificate No: EX3-7350_ Dec15 [CALIBRATION CERTIFICATE Object EX3DV4 — SN:7350 Calibration procedure(s) QA CAL—01.v9, QA CAL—14.v4, QA CAL—23.v5, QA CAL—25.v6 Calibration procedure for dosimetric E—field probes Calibration date: December 17, 2015 This calibration certificate documents the traceabilty to national standards, which realize the physical units of measurements (S1). The measurements and the uncertainties with confidence probability are given on the following pages and are part of the certificate. All calibrations have been conducted in the closed laboratory facility: environment temperature (22 + 3)°C and humidity < 70% Calibration Equipment used (M&TE critical for calibration) Primary Standards ID Cal Date (Certificate No.) Scheduled Calibration Power meter E44198 GB41293874 01—Apr—15 (No. 217—02128) Mar—16 Power sensor E4412A MY41498087 01—Apr—15 (No. 217—02128) Mar—16 Reference 3 dB Attenuator SN: $5054 (3c) 01—Apr—15 (No. 217—02129) Mar—16 Reference 20 dB Attenuator SN: SS277 (20x) 01—Apr—15 (No. 217—02132) Mar—16 Reference 30 dB Attenuator SN: $5129 (30b) 01—Apr—15 (No. 217—02133) Mar—16 Reference Probe ES3DV2 SN: 3013 30—Dec—14 (No. ES3—3013_Dec14) Dec—15 DAE4 SN: 660 14—Jan—15 (No. DAE4—660_Jan15) Jan—16 Secondary Standards ID Check Date (in house) Scheduled Check RF generator HP 8648C US3642U01700 4—Aug—99 (in house check Apr—13) In house check: Apr—16 Network Analyzer HP 8753E US37390585 18—Oct—01 (in house check Oct—15) In house check: Oct—16 Name Function Si'n\at' r Calibrated by: Claudio Leubler Laboratory Technician Approved by: Katia Pokovic Technical Manager es Issued: December17, 2015 This calibration certificate shall not be reproduced except in full without written approval of the laboratory. Certificate No: EX3—7350_Dec15 Page 1 of 11

Calibration Laboratory of S Schweizerischer Kalibrierdienst Schmid & Partner C Service suisse d‘étalonnage Engineering AG Servizio svizzero di taratura Zeughausstrasse 43, 8004 Zurich, Switzerland S Swiss Calibration Service Accredited by the Swiss Accreditation Service (SAS) Accreditation No.: SCS 0108 The Swiss Accreditation Service is one of the signatories to the EA Multilateral Agreement for the recognition of calibration certificates Glossary: TSL tissue simulating liquid NORMx,y,z sensitivity in free space ConvF sensitivity in TSL / NORMx,y,z DCP diode compression point CF crest factor (1/duty_cycle) of the RF signal A, B,C, D modulation dependentlinearization parameters Polarization o ip rotation around probe axis Polarization $ 8 rotation around an axis thatis in the plane normal to probe axis (at measurement center), i.e., 8 = 0 is normal to probe axis Connector Angle information used in DASY system to align probe sensor X to the robot coordinate system Calibration is Performed According to the Following Standards: a) IEEE Std 1528—2013, "IEEE Recommended Practice for Determining the Peak Spatial—Averaged Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques", June 2013 b) IEC 62209—1, "Procedure to measure the Specific Absorption Rate (SAR) for hand—held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz)", February 2005 c) IEC 62209—2, "Procedure to determine the Specific Absorption Rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz)", March 2010 d) KDB 865664, "SAR Measurement Requirements for 100 MHz to 6 GHz" Methods Applied and Interpretation of Parameters: * NORMx,y,z: Assessed for E—field polarization 8 = 0 (f < 900 MHz in TEM—cell; f > 1800 MHz: R22 waveguide). NORMx,y,z are only intermediate values, i.e., the uncertainties of NORMx,y,z does not affect the E*—field uncertainty inside TSL (see below ConvF). * NORM(Mx,y,z = NORMx,y,z * frequency_response (see Frequency Response Chart). This linearization is implemented in DASY4 software versions later than 4.2. The uncertainty of the frequency response is included in the stated uncertainty of ConvF. * DCPx,y,z: DCP are numerical linearization parameters assessed based on the data of power sweep with CW signal (no uncertainty required). DCP does not depend on frequency nor media. * PAR: PAR is the Peak to Average Ratio that is not calibrated but determined based on the signal characteristics * Axy,z; Bxy,z; Cxy,z; Dx,y,z; VRx,y,z: A, B, C, D are numerical linearization parameters assessed based on the data of power sweep for specific modulation signal. The parameters do not depend on frequency nor media. VR is the maximum calibration range expressed in RMS voltage across the diode. * ConvF and Boundary Effect Parameters: Assessed in flat phantom using E—field (or Temperature Transfer Standard for f < 800 MHz) and inside waveguide using analytical field distributions based on power measurements for f > 800 MHz. The same setups are used for assessment of the parameters applied for boundary compensation (alpha, depth) of which typical uncertainty values are given. These parameters are used in DASY4 software to improve probe accuracy close to the boundary. The sensitivity in TSL corresponds to NORMx,y,z * ConvF whereby the uncertainty corresponds to that given for ConvF. A frequency dependent ConvF is used in DASY version 4.4 and higher which allows extending the validity from + 50 MHz to + 100 MHz. * Spherical isotropy (3D deviation from isotropy): in a field of low gradients realized using a flat phantom exposed by a patch antenna. * Sensor Offset: The sensor offset corresponds to the offset of virtual measurement center from the probe tip (on probe axis). No tolerance required. * Connector Angle: The angle is assessed using the information gained by determining the NORMx (no uncertainty required). Certificate No: EX3—7350_Dec15 Page 2 of 11

EX3DV4 — SN:7350 December 17, 2015 Probe EX3DV4 SN:7350 Manufactured: October 13, 2014 Calibrated: December 17, 2015 Calibrated for DASY/EASY Systems (Note: non—compatible with DASY2 system!) Certificate No: EX3—7350_Dec15 Page 3 of 11

EX3DV4— SN:7350 December 17, 2015 DASY/EASY — Parameters of Probe: EX3DV4 — SN:7350 Basic Calibration Parameters Sensor X Sensor Y Sensor Z Unc (k=2) Norm (uV/(V/m)) 0.50 0.51 0.48 £10.1 % DCP (mV)" 97.8 98.5 97.4 Modulation Calibration Parameters UID Communication System Name A B ¢ D VR Un dB dByuV dB mV (k=2) 0 Cw x 0.0 0.0 1.0 0.o0 1396 1#35% Y 0.0 0.0 1.0 146.2 2 0.0 0.0 1.0 132.3 The reported uncertainty of measurementis stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%. * The uncertainties of Norm X,Y,Z do not affect the E*—field uncertainty inside TSL (see Pages 5 and 6). ® Numerical linearization parameter: uncertainty not required. © Uncertainty is determined using the max. deviation from linear response applying rectangular distribution and is expressed for the square of the field value. Certificate No: EX3—7350_Dec15 Page 4 of 11

EX3DV4— SN:7350 December 17, 2015 DASY/EASY — Parameters of Probe: EX3DV4 — SN:7350 Calibration Parameter Determined in Head Tissue Simulating Media Relative Conductivity Depth ° Unc f(MHz)® |_Permittivity® _(S/m)" ConvFX ConvFY| ConvFZ Alpha® _(mm) (k=2) 750 41.9 0.89 10.26 10.26 10.26 0.19 1.60 + 12.0 % 835 41.5 0.90 9.97 9.97 9.97 0.18 1.70 £12.0 % 900 41.5 0.97 9.80 9.80 9.80 0.27 1.16 + 12.0 % 1450 40.5 1.20 8.66 8.66 8.66 0.14 2.06 * 12.0 % 1750 40.1 1.37 8.59 8.59 8.59 0.21 1.11 +12.0 % 1900 40.0 1.40 8.31 8.31 8.31 0.39 0.80 +12.0 % 2100 39.8 1.49 8.42 8.42 8.42 0.39 0.80 +12.0 % 2300 39.5 1.67 7.87 7.87 7.87 0.40 0.84 £12.0 % 2450 39.2 1.80 7.50 7.50 7.50 0.32 0.99 £+12.0 % 2600 39.0 1.96 7.18 7.18 7.18 0.33 1.01 + 12.0 % 3500 37.9 2.91 7.26 7.26 7.26 0.27 1.31 £13.1 % 5200 36.0 4.66 5.48 5.48 5.48 0.40 1.80 £13.1 % 5300 35.9 4.76 5.25 5.25 5.25 0.40 1.80 £13.1 % 5500 35.6 4.96 4.87 4.87 4.87 0.45 1.80 £13.1% 5600 35.5 5.07 4.52 4.52 4.52 0.50 1.80 £13.1% 5800 35.3 5.27 4.53 4.53 4.53 0.50 1.80 £13.1 % © Frequency validity above 300 MHz of + 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS of the ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. Frequency validity below 300 MHz is + 10, 25, 40, 50 and 70 MHz for ConvF assessments at 30, 64, 128, 150 and 220 MHz respectively. Above 5 GHzfrequency validity can be extended to + 110 MHz. "At frequencies below 3 GHz, the validity of tissue parameters (c and 0) can be relaxed to + 10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (c and o) is restricted to + 5%. The uncertainty is the RSS of the ConvF uncertainty for indicated target tissue parameters. 8 Alpha/Depth are determined during calibration. SPEAG warrants that the remaining deviation due to the boundary effect after compensation is always less than + 1% for frequencies below 3 GHz and below + 2% for frequencies between 3—6 GHz at any distance larger than half the probe tip diameter from the boundary. Certificate No: EX3—7350_Dec15 Page 5 of 11

EX3DV4— SN:7350 December 17, 2015 DASY/EASY — Parameters of Probe: EX3DV4 — SN:7350 Calibration Parameter Determined in Body Tissue Simulating Media Relative Conductivity Depth Une f(MHz)° Permittivity" (S/m)" ConvFX ConvFY ConvFZ Alpha® _(mm) (k=2) 750 55.5 0.96 10.15 10.15 10.15 0.42 0.89 +12.0 % 835 55.2 0.97 9.83 9.83 9.83 0.21 1.56 +12.0 % 900 55.0 1.05 9.84 9.84 9.84 0.34 1.08 +12.0 % 1450 54.0 1.30 8.54 8.54 8.54 0.14 2.22 + 12.0 % 1750 53.4 1.49 8.30 8.30 8.30 0.30 0.93 * 12.0 % 1900 53.3 1.52 8.04 8.04 8.04 0.32 0.94 * 12.0 % 2100 53.2 1.62 8.05 8.05 8.05 0.27 1.06 * 12.0 % 2300 52.9 1.81 7.69 7.69 7.69 0.39 0.87 £12.0 % 2450 §2.7 1.95 7.49 7.49 7.49 0.40 0.80 £12.0 % 2600 52.5 216 7.30 7.30 7.30 0.44 0.83 +*12.0 % 3500 51.3 3.31 6.80 6.80 6.80 0.30 1.36 +13.1 % 5200 49.0 5.30 4.84 4.84 4.84 0.50 1.90 £13.1% 5300 48.9 5.42 4.62 4.62 4.62 0.50 1.90 £13.1% 5500 48.6 5.65 4.05 4.05 4.05 0.60 1.90 £13.1 % 5600 48.5 5.77 3.91 3.91 3.91 0.60 1.90 £13.1 % 5800 48.2 6.00 4.03 4.03 4.03 0.60 1.90 £13.1% © Frequency validity above 300 MHz of + 100 MHz only applies for DASY v4.4 and higher (see Page 2), else it is restricted to + 50 MHz. The uncertainty is the RSS of the ConvF uncertainty at calibration frequency and the uncertainty for the indicated frequency band. Frequency validity below 300 MHz is + 10, 25, 40, 50 and 70 MHz for ConvF assessments at 30, 64, 128, 150 and 220 MHz respectively. Above 5 GHz frequency validity can be extended to + 110 MHz. * At frequencies below 3 GHz, the validity of tissue parameters (e and 0) can be relaxed to + 10% if liquid compensation formula is applied to measured SAR values. At frequencies above 3 GHz, the validity of tissue parameters (e and ) is restricted to + 5%. The uncertainty is the RSS of the ConvF uncertainty for indicated target tissue parameters. © Alpha/Depth are determined during calibration. SPEAG warrants that the remaining deviation due to the boundary effect after compensation is always less than + 1% for frequencies below 3 GHz and below * 2% for frequencies between 3—6 GHz at any distance larger than half the probetip diameter from the boundary Certificate No: EX3—7350_Dec15 Page 6 of 11

EX3DV4— SN:7350 December 17, 2015 Frequency Response of E—Field (TEM—Cell:ifi110 EXX, Waveguide: R22) Frequency response (normalized) T 2000 3 TEM KA R22 Uncertainty of Frequency Response of E—field: £ 6.3%(k=2) Certificate No: EX3—7350_Dec15 Page 7 of 11

EX3DV4— SN:7350 December 17, 2015 Receiving Pattern (¢), 8 = 0° £=450 MHz,TEM £=1800 MHz,R22 I & 0 180. o os o8 i 2. o« os o8 | \ yhex £ t / 1 5 8 i & + + * 7 * * , 226 +.4 s15 228 315 _ _ so C a0 _ e 6 e & ® e & & Tot x y 2 Tot x y 2 Error [dB] 450 MHz 1800 aMHz s 2000 MHz coj 2500 MHz Uncertainty of Axial Isotropy Assessment: £ 0.5% (k=2) Certificate No: EX3—7350_Dec15 Page 8 of 11

EX3DV4— SN:7350 December 17, 2015 Dynamic Range f(SARneaq) (TEM cell , feva= 1900 MHz) 10‘ Input Signal [UV] 103 } { f j S 10° 10° 108 10° 10‘ 10 10+ SAR [mW/cm3] K2 Le] not compensated compensated Error [dB] "T— s — *"I — 103 102 101 100 101 102 103 SAR [mW/cm3] C#] Le] not compensated compensated Uncertainty of Linearity Assessment: £ 0.6% (k=2) Certificate No: EX3—7350_Dec15 Page 9 of 11

EX3DV4— SN:7350 December 17, 2015 Conversion Factor Assessment f= 835 MHz,WGLS RY (H_convF) f= 1900 MHz,WGLS R22 (H_convF) «0 h — xo | as | ‘ ‘ so l\\ | J‘ $ *" { | §*| $ | 2 20 & | 15 10? (0-' : E [ 05 5'\ * 0 10 ® 30 «0 5o so 0 5 10 18 20 2 30 35 «0 2 (mm] 2 {mm} Lel +1 * [+] anabical measured anabtical measured Deviation from Isotropy in Liquid Error (6, 9), f = 900 MHz Deviation —1.0 —0.8 —0.6 —0.4 —02 00 02 04 0.6 08 1.0 Uncertainty of Spherical Isotropy Assessment: + 2.6% (k=2) Certificate No: EX3—7350_Dec15 Page 10 of 11

EX3DV4— SN:7350 December 17, 2015 DASY/EASY — Parameters of Probe: EX3DV4 — SN:7350 Other Probe Parameters Sensor Arrangement Triangular Connector Angle (°) 29.8 Mechanical Surface Detection Mode enabled Optical Surface Detection Mode disabled Probe Overall Length 337 mm Probe Body Diameter 10 mm Tip Length 9 mm Tip Diameter 2.5 mm Probe Tip to Sensor X Calibration Point 1 mm Probe Tip to Sensor Y Calibration Point 1 mm Probe Tip to Sensor Z Calibration Point 1 mm Recommended Measurement Distance from Surface 1.4 mm Certificate No: EX3—7350_Dec15 Page 11 of 11


Document Created: 2016-10-25 16:23:13
Document Modified: 2016-10-25 16:23:13
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC