RF Exposure

FCC ID: HFS-LI170

RF Exposure Info

Download: PDF
FCCID_2117062

RF Exposure Evaluation Report Report No. : FA2O0222-02 RF Exposure Evaluation Report APPLICANT : Quanta Computer Inc. EQUIPMENT : LTE sip module BRAND NAME : Quanta; Aptos; Topmore MODEL NAME / : LI170; S901100003; S901100018 MARKETING NAME FCC ID : HFS-LI170 STANDARD : 47 CFR Part 2.1091 We, SPORTON INTERNATIONAL INC., would like to declare that the device has been evaluated in accordance with 47 CFR Part 2.1091, and pass the limit. Without written approval of SPORTON INTERNATIONAL INC., the test report shall not be reproduced except in full. Reviewed by: Eric Huang / Deputy Manager Approved by: Jones Tsai / Manager SPORTON INTERNATIONAL INC. No. 52, Hwa Ya 1st Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. SPORTON INTERNATIONAL INC. Page Number : 1 of 8 TEL : 886-3-327-3456 Report Issued Date : Oct. 23, 2013 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : HFS-LI170

RF Exposure Evaluation Report Report No. : FA2O0222-02 Table of Contents 1. ADMINISTRATION DATA ........................................................................................................................... 4 1.1. Testing Laboratory ............................................................................................................................. 4 1.2. Applicant ............................................................................................................................................ 4 1.3. Manufacturer ...................................................................................................................................... 4 2. DESCRIPTION OF EQUIPMENT UNDER TEST (EUT) ............................................................................. 5 3. MAXIMUM RF AVERAGE OUTPUT POWER AMONG PRODUCTION UNITS ........................................ 6 4. RF EXPOSURE LIMIT INTRODUCTION .................................................................................................... 7 5. RADIO FREQUENCY RADIATION EXPOSURE EVALUATION ............................................................... 8 5.1. Power Density Calculations ............................................................................................................... 8 SPORTON INTERNATIONAL INC. Page Number : 2 of 8 TEL : 886-3-327-3456 Report Issued Date : Oct. 23, 2013 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : HFS-LI170

RF Exposure Evaluation Report Report No. : FA2O0222-02 Revision History REPORT NO. VERSION DESCRIPTION ISSUED DATE FA2O0222-02 Rev. 01 Initial issue of report Oct. 23, 2013 SPORTON INTERNATIONAL INC. Page Number : 3 of 8 TEL : 886-3-327-3456 Report Issued Date : Oct. 23, 2013 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : HFS-LI170

RF Exposure Evaluation Report Report No. : FA2O0222-02 1. Administration Data 1.1. Testing Laboratory Test Site SPORTON INTERNATIONAL INC. st No. 52, Hwa Ya 1 Rd., Hwa Ya Technology Park, Kwei-Shan Hsiang, Tao Yuan Hsien, Taiwan, R.O.C. Test Site Location TEL: +886-3-327-3456 FAX: +886-3-328-4978 1.2. Applicant Company Name Quanta Computer Inc. Address 211 Wen Hwa 2nd Rd., Kueishan, Taoyuan 33377, Taiwan 1.3. Manufacturer Company Name 1. Quanta Computer Inc. 2. Aptos Technology Inc. 3. Topmore Technology Inc. Address 1. 211 Wen Hwa 2nd Rd., Kueishan, Taoyuan 33377, Taiwan 2. No. 398, Youyi Rd., Jhunan Township, Miaoli County 350, Taiwan 3. 1F., No. 2, Liujia 7th Rd., Zhubei City, Hsinchu County 302, Taiwan R. O. C. SPORTON INTERNATIONAL INC. Page Number : 4 of 8 TEL : 886-3-327-3456 Report Issued Date : Oct. 23, 2013 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : HFS-LI170

seorroncas. RF Exposure Evaluation Report Report No. : FA200222—02 2. Description of Equipment Under Test (EUT) Product Feature & Specification EUT Type LTE sip module Brand Name Quanta; Aptos; Topmore Model Name / Marketing Name L1170; $901100003; 901100018 FCC ID HES—L170 Wireless Technology and Frequency Range LTE Band 13; 779.5 MHz ~ 784.5 MHz Mode * LTE: QPSK, 16QAM Antenna Type Dipole Antenna HW Version LM170116 EUT Stage Production Unit Remark: The above EUT‘s information was declared by manufacturer. Please refer to the specifications or user‘s manual for more detailed description. SPORTON INTERNATIONAL INC. Page Number : 5 of 8 TEL : 886—3—327—3456 Report Issued Date : Oct. 23, 2013 FAX : 886—3—328—4978 Report Version : Rev. 01 FCC ID : HFS—L1170

RF Exposure Evaluation Report Report No. : FA2O0222-02 3. Maximum RF average output power among production units LTE Band 13 average power(dBm) Modulation BW (MHz) RB size MPR (dB) Target Power QPSK 10 ≤ 12 0 24 QPSK 10 > 12 1 23 16QAM 10 ≤ 12 1 23 16QAM 10 > 12 2 22 QPSK 5 ≤8 0 24 QPSK 5 >8 1 23 16QAM 5 ≤8 1 23 16QAM 5 >8 2 22 The table below summarized necessary items addressed in KDB 941225 D05 v02. FCC ID HFS-LI170 EUT LTE sip module Operating Frequency Range of each LTE LTE Band 13: 779.5 MHz ~ 784.5 MHz transmission band Channel Bandwidth 5MHz, 10MHz Transmission (H, M, L) channel numbers and frequencies in each LTE band Band 13 Bandwidth 5 MHz Bandwidth 10 MHz Channel # Frequency (MHz) Channel # Frequency (MHz) L 23205 779.5 M 23230 782 23230 782 H 23255 784.5 E category, uplink modulations used Category 3, QPSK, and 16QAM LTE Voice / Data requirements Data only Yes, per 3GPP TS 36.101 v11.0.0 LTE MPR permanently built-in by design In the base station simulator configuration, Network Setting value is set to NS_01 to disable LTE A-MPR A-MPR during SAR testing. Base station simulator used for Testing Anritsu MT8820C SPORTON INTERNATIONAL INC. Page Number : 6 of 8 TEL : 886-3-327-3456 Report Issued Date : Oct. 23, 2013 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : HFS-LI170

RF Exposure Evaluation Report Report No. : FA2O0222-02 4. RF Exposure Limit Introduction According to ANSI/IEEE C95.1-1992, the criteria listed in Table 1 shall be used to evaluate the environmental impact of human exposure to radio frequency (RF) radiation as specified in §1.1310. The MPE was calculated at 20 cm to show compliance with the power density limit. The following formula was used to calculate the Power Density: Where: S = Power Density P = Output Power at Antenna Terminals G = Gain of Transmit Antenna (linear gain) R = Distance from Transmitting Antenna SPORTON INTERNATIONAL INC. Page Number : 7 of 8 TEL : 886-3-327-3456 Report Issued Date : Oct. 23, 2013 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : HFS-LI170

RF Exposure Evaluation Report Report No. : FA2O0222-02 5. Radio Frequency Radiation Exposure Evaluation 5.1. Power Density Calculations <Standalone Calculated> Note: 1. This MPE analysis is applicable to any collocated transmitters with transmit power for WLAN/WiMax is less than or equal to 29dBm and for Bluetooth is less than or equal to 15dBm. 2. A maximum antenna gain of 5 dBi for WLAN/WiMAX/BT has been assumed for all collocated antennas. 3. For conservativeness, the lowest uplink frequency of each band is used to determine the MPE limit of that band Power Antenna Maximum Maximum Power Frequency Average Density at Limit Band Gain Power ERP/EIRP Density (MHz) EIRP (mW) 20cm (mW/cm2) (dBi) (dBm) (W) / Limit (mW/cm2) LTE Band 13 779.5 6.5 24.0 0.68 1122.02 0.22 0.52 0.43 <Collocate Calculated> Note: 1. Σ (Power Density / Limit): This is a summation of [(power density for each transmitter/antenna included in the simultaneous transmission)/ (corresponding MPE limit)], for WWAN + WLAN + Bluetooth. 2. Considering the WWAN module collocation with the WLAN, WiMax and Bluetooth transmitter of the EIRP performance listed in the table above, the aggregated (power density /limit) is smaller than 1, and MPE of 3 collocated transmitters is compliant Calculated WLAN Bluetooth LTE Band 13 Σ (Power Density / Limit) Wireless EIRP Power Limit Power Density Power Density Power Density / of Interface (dBm) Density (W/m2) / Limit / Limit Limit WWAN+WLAN+Bluetooth (W/m2) WLAN2.4GHz 34.0 0.50 1.0 0.50 WLAN5GHz 34.0 0.50 1.0 0.50 0.43 0.95 WiMax 34.0 0.50 1.0 0.50 Bluetooth 20.0 0.02 1.0 0.02 Conclusion: Based on 47 CFR §2.1091, the analysis concludes that this product when transmitting in standalone within a host device, is complant with the FCC RF exposure requirements in mobile exposure condition, provided the conducted power and antenna gain do not exceed the limits for each given frequency band per wireless technology as follow table: Maximum Conducted Stanalone Maximum Technology Band Power (dBm) Antenna Gain (dBi) LTE Band 13 24.0 6.5 SPORTON INTERNATIONAL INC. Page Number : 8 of 8 TEL : 886-3-327-3456 Report Issued Date : Oct. 23, 2013 FAX : 886-3-328-4978 Report Version : Rev. 01 FCC ID : HFS-LI170


Document Created: 2013-10-23 13:49:17
Document Modified: 2013-10-23 13:49:17
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC