1800 MHz Dipole

FCC ID: HFS-G51

RF Exposure Info

Download: PDF
FCCID_380581



1. Measurement Conditions The measurements were performed in the flat section of the SAM twin phantom filled with head simulating solution ofthe following electrical parameters at 1800 MHz: Relative Dielectricity 39.2 +5% Conductivity 1.36 mho/m £5% The DASY4 System with a dosimetric E—field probe ET3DV6 (SN:1507, Conversion factor 5.3 at 1800 MHz) was used for the measurements. The dipole was mounted on the small tripod so that the dipole feedpoint was positioned below the center marking of the flat phantom section and the dipole was oriented parallel to the body axis (the long side of the phantom). The standard measuring distance was 10mm from dipole center to the solution surface. The included distance holder was used during measurements for accurate distance positioning. The coarse grid with a grid spacing of 1 5mm was aligned with the dipole. The 7x7x7 fine cube was chosen for cube integration. The dipole input power (forward power) was 250mW + 3 %. The results are normalized to 1W input power. 2. SAR Measurement with DASY4 System Standard SAR—measurements were performed according to the measurement conditions described in section 1. The results (see figure supplied) have been normalized to a dipole input power of 1 W (forward power). The resulting averaged SAR—values measured with the dosimetric probe ET3DV6 SN:1507 and applying the advanced extrapolation are: averaged over 1 ocm‘ (1 g) of tissue: 38.2 mW/g + 16.8 % (k=2)‘ averaged over 10 em" (10 g) of tissue: 20.1 mW/g + 16.2 % (k=2)‘ ‘ validation uncertainty


Pase L o1 DuetTime ocoon1r30as Test Laborman: SPEAG,Zurich,Switrerland Pile Name: SN294_SNI507_HSL1800,090403.dat DUT: Dipole 1800 Mite: Type: DIBOOV2; Seria; DIAOOVZ— SN294 Program: DipoleCallbration Communication System: CW—1800;Frequency: 1800 Mi.Duy Cyole 1. 1 Medium: HSL 1800 Mite (0 1.36 mhaim,¢, 3922 = 1000 ky/in) Phantom secin: Flat Section DASY4 Confiwation —Probe: ETSDVé SNIS07; ComF($3, 53,53) Calbaied: TR200S — SersorSurfce um (Mechanical Surice Deecion) — Blectonics DAF3— SN41!; Clb 1162003 — Phariom: SAM wih CR — TP1006; Type: SAM 40Seril: TP.1006 — Measurement SW: DASY4, V4.1 Buld 23 Posprocessing SW SEMCAD, V1 6 Buld to9 Pin= 250 md = 10 mamAren Sean (BxBHx1): Measurementpid. t Soum. y=1Som Pin= 250 mWd« 10 man/Zoom Sean (7i7x7)Cabe 0: Measuremen gid h Smm,dySmim. gecsnm Reference Value = 928 Vim Peak SAR= 163 Whe SARCI @958 mWls SAR(1O g = 503 mWihy Power brt=—0008 ds

29¢ mm is aun wsasrs crommse isamyr srmessmoms + se crerrmassmm ie trmmssssesems



Document Created: 2019-05-31 01:07:47
Document Modified: 2019-05-31 01:07:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC