User Manual

FCC ID: HFS-C301

Users Manual

Download: PDF
FCCID_2590112

Clover Mini Feature Guide v2

English # Deutsch # Español # Français # Italiano # Nederlands # Polski #

This guide describes We are continuously Clover Mini’s hardware improving our software. and software features. To see the latest version of this guide, visit clover.com/setup. In Europe, visit eu.clover.com/setup 1 Clover Mini Feature Guide English 2

What’s included About Clover Mini Clover Mini is a powerful, flexible, easy-to-use payment terminal. It can be used as a cash register Clover Mini Hub and more. On your countertop, Clover Mini securely accepts chip-and-pin and chip-and-signature EMVcards, enables credit and debit card Power adapter (US) Power adapter (EU) transactions via swipe (MSR), insert (EMV Chip), or tap (EMV Contactless). Receipt paper x2 Screwdriver Ethernet SIM adapters USB (only for 3G) 3 Clover Mini Feature Guide English 4

Get to know Clover Mini Clover Mini Hub SIM card slot Front REVERSE SO AUDIO AND Insert payment MIC EASIER Swipe payment Charging port Type B USB Ethernet Type A USB Cash drawer Contactless port (optional) ports (optional) payment reader Microphone Audio jack Switching Hub connector’s direction: 1 Turn Clover Mini over to access underside Speaker 2 Use provided screwdriver to loosen green screws 3 Switch connector to desired direction Back Front facing 4 Tighten green screws (be sure to not overtighten) camera Reset button Paper roll release pull tab Receipt door Green screws on Hub connector must always be tightened to  ensure reliable connection. For more pairing options visit clover.com/setup. 5 Clover Mini Feature Guide English 6

Set up your Clover Mini  Video set up: clover.com/setup Payment Methods Europe: eu.clover.com/setup Chip Card 1 (Only for 3G) Open SIM card tray by loosening green screw with provided screwdriver. Pick the SIM card tray 1234 5678 9012 3456 size that matches with your SIM card. Place card on tray and secure SIM door by tightening green screw. 1234 5678 9012 3456 2 Plug all accessories into Hub. Provided ethernet and 34 5678 9012 3456 USB cords are optional. Insert Card 3 Plug power adapter cable into Hub charger port . 4 Plug power brick into power source. Device will automatically power on. Tap Card 1234 5678 9012 3456 Back 3 Magnetic 1 Stripe Card 1234 5678 9012 3456 2 Swipe Card 1234 5678 9012 3456 1234 5678 9012 3456 For more secure surface mounting instructions: ------- link link ---- 7 Clover Mini Feature Guide English 8

Applications Taking Payments Setup Wizard Let’s Get Started Sale Enter an amount and take a payment--it’s that simple. This is your guide for setting up Clover Mobile. Your activation code is in your Bar Tabs welcome email. Open tabs with a credit card, view open tabs, and close them at the end of the night. Auth Only Home Auth a credit card, view open auths, and close them for a Use your Clover Home screen for quick final amount. access to all your Clover apps. Employees can also log in and out from here. Back of Store Closeout Review your sales by transaction type, card type, and server. Close open tips and tabs and perform closeouts at the end of the day for your device. Tips App Market Enter tips from paper receipts quickly and easily. Custom Business Solutions Transactions Your transaction history. Review recent transactions, Browse and install apps to fit your store’s perform refunds, and reprint receipts. every need. 9 Clover Mini Feature Guide English 10

Useful Resources Web Access Manage Your Apps Some apps allow you to access them via your web browser. We’ve put shortcuts to these web pages at clover.com/home. Please use Chrome, Safari, or Firefox. In Europe, visit eu.clover.com/home Need Help? Visit help.clover.com, use the Help app, or call us anytime at the phone number given in your welcome email. PCI PTS security guidelines are available in our Help app. 11 Clover Mini Feature Guide English 12

FCC Part 15 Industry Canada Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the CAN ICES-3 (B)/NMB-3(B) following two conditions: (1) This device may not cause harmful interference, (2) This device complies with Industry Canada license-exempt RSS standard(s). This device must accept any interference received, including interference that Operation is subject to the following two conditions: may cause undesired operation. (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may FCC Part 15 Class B-specific cause undesired operation of the device. Note: This equipment has been tested and found to comply with the limits Le présent appareil est conforme aux CNR d’Industrie Canada applicables for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits aux appareils radio exempts de licence. L’exploitation est autorisée aux deux are designed to provide reasonable protection against harmful interference conditions suivantes: in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with (1) l’appareil ne doit pas produire de brouillage, et the instructions, may cause harmful interference to radio communications. (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, However, there is no guarantee that interference will not occur in a particular même si le brouillage est susceptible d’en compromettre le fonctionnement. installation. If this equipment does cause harmful interference to radio or The device could automatically discontinue transmission in case of absence of television reception, which can be determined by turning the equipment off and information to transmit, or operational failure. Note that this is not intended to on, the user is encouraged to try to correct the interference by one or more of prohibit transmission of control or signaling information or the use of repetitive the following measures: codes where required by the technology. • Reorient or relocate the receiving antenna. • The device for operation in the band 5150–5250 MHz is only for indoor • Increase the separation between the equipment and receiver. use to reduce the potential for harmful interference to co-channel mobile satellite systems; • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • The maximum antenna gain permitted for devices in the bands 5250–5350 MHz and 5470–5725 MHz shall comply with the e.i.r.p. limit; and • Consult the dealer or an experienced radio/TV technician for help. • The maximum antenna gain permitted for devices in the band 5725–5825 MHz shall comply with the e.i.r.p. limits specified for point-to-point and non FCC Warning point-to-point operation as appropriate. Changes or modifications not expressly approved by the party responsible for In addition, high-power radars are allocated as primary users (i.e. priority users) compliance could void the user‘s authority to operate the equipment. of the bands 5250–5350 MHz and 5650–5850 MHz and that these radars could cause interference and/or damage to LE-LAN devices. FCC exposure limit compliance statement (SAR statement) This equipment complies with IC RSS-102 RF exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated This equipment complies with radio frequency (RF) exposure limits adopted by with minimum distance 20 cm between the radiator & your body. the Federal Communications Commission for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm Cet équipement est conforme aux limites d’exposition aux rayonnements IC between the radiator & your body. établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonne- ment et votre corps. 13 Clover Mini Feature Guide English 14

CE RF Exposure Compliance This device meets the EU requirements (1999/519/EC) and the International Commission on Non-Ionizing Radiation Protection (ICNIRP) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. This device is restricted to indoor use only when operating in the 5150 to 5350 MHz frequency range. 15 Clover Mini Feature Guide v.4 draft 1 English 16

Clover Mini Wi-Fi Clover Mini 3G Model: C300 Model: C301 FCC ID: HFS-C300 FCC ID: HFS-C301 FCC information is available on the device under Settings > About Mobile > FCC information. EU Importer OmniPay Ltd Unit 9, Richview Office Park, Clonskeagh, Dublin 14, Ireland Waste Electrical and Electronic Equipment-WEEE NOTE: This product is covered electronic equipment under the European Union’s Waste from Electrical and Electronic Equipment (“WEEE”) Directive(2012/19/EU). The WEEE Directive requires that covered equipment be collected and managed separately from typical household waste in all EU member states. Please follow the guidance of your local environmental authority or ask the shop where you purchased the product for collection or recycling options.


Document Created: 2015-04-15 19:09:45
Document Modified: 2015-04-15 19:09:45
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC