Users Manual

FCC ID: HEDML60LW

Users Manual

Download: PDF
FCCID_3731668

Q ui c k Sta r t G u id e Cloud-Enabled Outdoor 60 + 5 + 2.4GHz PTP/PTMP MetroLinq™ 60 LW 1. Unpack the MetroLinq 3. Grounding Package Contents ◆ MetroLinq™ 60 LW (ML-60-LW) Tools/Items Required 2 ◆ Flat-head screwdriver ◆ Ethernet cables 1 1 Ensure the structure on which the unit is to be mounted is properly grounded and in compliance with ETSI ETS 300 253. 2 Verify that there is a good electrical connection to a grounding point (no paint or isolating surface treatment). 2. Mount the MetroLinq on a Pole Use the included (M4) screw to attach a grounding wire (not included) to the grounding point on the unit, and then to ground. 2 Caution: The earth connection must not be removed unless all supply connections have been disconnected. 4. Connect Cables 1 2 1 1 Slide the pole-mount bracket onto the rails on the back of the AP until it snaps into its secured position. 2 Use the included M3 screw to secure the bracket to the AP. 1 Connect outdoor-rated Category 5e or better cable to the 3 RJ45 port. (The other end of this cable connects to the PoE power injector.) 4 2 Install a 1G SFP transceiver in the SFP port, and then connect fiber optic cabling to the transceiver. The following transceivers are supported: ◆ 1000BASE-SX 4 3 ◆ 1000BASE-LX 5. Connect Power a. Using the PoE Power Injector 3 Feed the two steel-band clamps through the pole-mount 3 bracket mounting points. 4 Fasten the steel-band clamps around the pole to secure the AP to the pole. 1 2 1 Connect outdoor-rated Category 5e or better cable from the MetroLinq to the POE port on the power injector. ignitenet.com – 1 – E012018-CS-R01

Quick Start Guide 2 Connect Category 5e or better cable from the LAN port on the power injector to a LAN switch. 7. Connect to the Web User Interface 3 Connect the power cord to the power injector and to a To access the web interface, connect a PC directly to the MetroLinq’s nearby AC power source (100-240 VAC, 50/60 Hz). RJ45 port. In a web browser, enter the default management IP address of 192.168.1.20 to access the web login page. Caution: The power injector is designed for indoor use only. Never mount the power injector outside with the Log in to the web interface MetroLinq unit. using the default settings: ◆ Login Name — root ◆ Password — admin123 b. DC Power 1 2 Note: To reset the MetroLinq to factory default settings, press and hold down the AP’s Reset button for 10 seconds. 8. Complete the Setup Wizard Select the country of operation for the AP. Setting the correct country ensures that the radios operate within Warning: Before wiring the DC block or connecting power local regulations specified for to the device, ensure that power to the feed lines is turned Wi-Fi networks. off at the supply circuit breaker or disconnected from the power bus. 1 Connect the 24 VDC power feed wire to the DC block “+” pin. 2 Connect the ground/return wire to the DC block “-” pin. Manage the MetroLinq with the IgniteNet Cloud Controller Go to cloud.ignitenet.com to register your AP. 6. Verify AP Operation Log in and select Devices from the menu. Click Add Device and enter the MetroLinq serial number and MAC address to register the MetroLinq with your cloud network. The serial number and MAC address can be found on the product packaging or label. Manage the MetroLinq in Stand-Alone Mode 4 If you select to manage the MetroLinq in stand-alone mode, use the web interface to manually make your configuration changes. For more information on MetroLinq configuration in stand-alone 3 mode, refer to the User Manual, which can be downloaded from ignitenet.com/support. 2 1 1 The power LED should be on amber. 2 The RJ45 port link/activity LED should be on/blinking green. 3 When connected, the SFP port link/activity LEDs should also be on/blinking green. 4 During normal operation, the wireless LEDs should be on/ blinking green. – 2 –

Quick Start Guide IMPORTANT NOTE: IC Radiation Exposure Statement: Safety and Regulatory Information This equipment complies with IC RSS-102 radiation exposure limits set forth for an uncontrolled environment. This equipment should be FCC Class B installed and operated with minimum distance 25 cm between the radiator and your body. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits Cet équipement est conforme aux limites d'exposition aux are designed to provide reasonable protection against harmful rayonnements IC établies pour un environnement non contrôlé. Cet interference in a residential installation. This equipment generates, uses équipement doit être installé et utilisé avec un minimum de 25 cm de and can radiate radio frequency energy and, if not installed and used in distance entre la source de rayonnement et votre corps. accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference CE Statement will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be This equipment complies with EU radiation exposure limits set forth for determined by turning the equipment off and on, the user is an uncontrolled environment. This equipment should be installed and encouraged to try to correct the interference by one of the following operated with minimum distance 20 cm between the radiator and your measures: body. All operational modes: ◆ Reorient or relocate the receiving antenna 2.4 GHz: 802.11b, 802.11g, 802.11n (HT20), 802.11n (HT40) ◆ Increase the separation between the equipment and receiver 5 GHz: 802.11a, 802.11n (HT20), 802.11n (HT40), 802.11ac (VHT20), 802.11ac (VHT40), 802.11ac (VHT80) ◆ Connect the equipment into an outlet on a circuit different from 60 GHz: 802.ad that to which the receiver is connected The frequency and maximum transmitted power limit in EU are listed as ◆ Consult the dealer or an experienced radio/TV technician for help below: FCC Caution: Any changes or modifications not expressly approved by 2412-2472 MHz: 20 dBm the party responsible for compliance could void the user’s authority to 5500-5700 MHz: 30 dBm operate this equipment. 57-66 GHz This device complies with Part 15 of the FCC Rules. Operation is subject AT BE BG CH CY CZ to the following two conditions: (1) This device may not cause harmful DE DK EE EL ES FI interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FR HR HU IE IS IT LI LT LU LV MT NL For product available in the USA/Canada market, only channel 1–11 can be operated. Selection of other channels is not possible. NO PL PT RO SE SI SK TR UK IMPORTANT NOTE: FCC Radiation Exposure Statement: The abbreviations of the countries, as prescribed in above table, where This equipment complies with FCC radiation exposure limits set forth for any restrictions on putting into service or any requirements for an uncontrolled environment. This equipment should be installed and authorization of use exist. operated with minimum distance 23 cm between the radiator and your body. Industry Canada This device complies with Industry Canada license-exempt RSS Europe - EU Declaration of Conformity standard(s). Operation is subject to the following two conditions: (1) this Hereby, IgniteNet Inc. declares that the radio equipment type: device may not cause interference, and (2) this device must accept any MetroLinq™ 60 LW is in compliance with Directive 2014/53/EU and interference, including interference that may cause undesired operation Directive 2014/35/EU. of the device. The full text of the EU declaration of conformity is available at the Le présent appareil est conforme aux CNR d'Industrie Canada following Internet address: www.ignitenet.com -> support. applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout NCC Statement (Taiwan) brouillage radioélectrique subi, même si le brouillage est susceptible 低功率電波輻射性電機管理辦法 d'en compromettre le fonctionnement. 第十二條 經型式認證合格之低功率射頻電機，非經許可，公司、商號或 For product available in the USA/Canada market, only channel 1–11 can 使用者均不得擅自變更頻率、加大功率或變更原設計之特性及功能。 be operated. Selection of other channels is not possible. 第十四條 低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經 Pour les produits disponibles aux États-Unis / Canada du marché, seul le 發現有干擾現象時，應立即停用，並改善至無干擾時方得繼續使用。前 canal 1 à 11 peuvent être exploités. Sélection d'autres canaux n'est pas 項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍 possible. 受合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。 – 3 –

Quick Start Guide 電磁波曝露量 MPE 標準值 1mW/cm²，本產品使用時建議應距離人體 Regulatory Compliances 20 cm。 Radio EN 300 328 V2.1.1(2016-11) EN 301 893 V2.1.1(2017-03) Warnings and Cautionary Messages EN 302 567 V2.1.1 (2017.07) Warning: This product does not contain any serviceable user 47 CFR FCC Part 15.247 parts. 47 CFR FCC Part 15.407 Warning: Installation and removal of the unit must be carried 47 CFR FCC Part 15.255 out by qualified personnel only. ICES-003,Issue 6,Class B Warning: When connecting this device to a power outlet, connect the field ground lead on the tri-pole power plug to a RSS-247 valid earth ground line to prevent electrical hazards. RSS-102 Issue 5 RSS-Gen Issue 4 Caution: Wear an anti-static wrist strap or take other suitable RSS-210 lssue 9 measures to prevent electrostatic discharge when handling this equipment. Emissions EN 301 489-1 V2.2.1 (2017-02) Caution: Do not plug a phone jack connector in the RJ-45 EN 301 489-17 V3.1.1 (2017-02) port. This may damage this device. 47 CFR FCC Rules and Regulations Part 15 Caution: Use only twisted-pair cables with RJ-45 connectors Subpart B, Class B Digital Device that conform to FCC standards. Canada Standard ICES-003, Issue 6, Class B Hardware Specifications Chassis Manufacturer Accton Technology Corporation Size (L x W x H:) 202.7 x 239.8 x 48 mm (7.98 x 9.44 x 1.89 inch) 1, Creation 3rd Rd., Hsinchu Science Park, Hsinchu 30077, Weight 650 g (1.43 lb) Taiwan, R.O.C Temperature Operating: -30 °C to 55 °C (-22 °F to 131 °F) US Contact IgniteNet Storage: -40 °C to 70 °C (-40 °F to 158 °F) 20 Mason, Irvine, CA 92618, Humidity Operating: 10% to 90% (non-condensing) USA https://www.ignitenet.com/ Network Interfaces Ports RJ45 Port: 1000BASE-T, passive PoE SFP Port: 1000BASE-X 60 GHz Radio IEEE 802.11ad 2.4 GHz Radio IEEE 802.11b/g/n 5 GHz Radio IEEE 802.11a/n/ac Radio Frequencies 2412–2472 (FCC, IC, CE, AU, MIC, NCC, SRRC) 5150–5250 (FCC, NCC) 5470–5725 (CE, MIC, AU) 5725–5850 (FCC, IC, NCC, SRRC) 58.32–64.80 GHz Power Supply PoE 24 VDC passive PoE Power Consumption 24 W maximum – 4 –


Document Created: 2018-01-25 19:38:58
Document Modified: 2018-01-25 19:38:58
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC