Declaration Letter

FCC ID: HD5-VM1AL0N

Cover Letter(s)

Download: PDF
FCCID_4068212

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com October 16, 2018 DTS-UNII Device Declaration Letter To Whom It May Concern: Honeywell International Inc. has declared below featured for FCC equipment authorization, Device FCC ID: HD5-VM1AL0N (1) DFS Device -- Master , Client with Radar detection capability , Client without radar detection capability, N/A (2) Active / Passive Scanning Frequency Band Active Scanning passive scanning (MHz) (the device can transmit (where the device is can Ad Hoc Mode or WIFI Access point capability a probe (beacon)) listen only with no Direct capability probes) 2412 - 2462MHz Yes , No Yes , No Yes , No Yes , No 5150 - 5250MHz Yes , No Yes , No Yes , No Yes , No 5250 - 5350MHz Yes , No Yes , No Yes , No Yes , No 5470 - 5725MHz Yes , No Yes , No Yes , No Yes , No 5725 - 5850MHz Yes , No Yes , No Yes , No Yes , No (3) Country code selection ability - Yes , No If yes, pls explain how it was implemented : (pls also help to provide detail of options for each country selection) (4) Meet 15.202 requirement - Yes , No , pls check below : A master device is defined as a device operating in a mode in which it has the capability to transmit without receiving an enabling signal. In this mode it is able to select a channel and initiate a network by sending enabling signals to other devices A client device is defined as a device operating in a mode in which the transmissions of the device are under control of the master. A device in client mode is not able to initiate a network… (5) For client devices that have software configuration control to operate in different modes (active scanning in some and passive scanning in others) in different bands (devices with multiple equipment classes or those that operate on non-DFS frequencies) or modular devices which configure the modes of operations through software, the application must provide software and operations description on how the software and / or hardware is implemented to ensure that proper operations modes cannot be modified by end user or an installer. Apply , “Yes , please see SW security Description”. No Apply , (If apply , pls help to provide explanation on it was implement , and how software was controlled) Sincerely, Sean MacKellar Product Compliance, Sr. Compliance Engineer Honeywell International Inc SPS (Safety and Productivity Solutions) 16201 25th Ave West Lynnwood, WA 98087 Tel: +14259214342 sean.mackellar@honeywell.com


Document Created: 2019-04-06 11:16:54
Document Modified: 2019-04-06 11:16:54
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC