Modular Approval Request

FCC ID: HD5-SFPMB

Cover Letter(s)

Download: PDF
FCCID_4037940

Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA www.honeywell.com www.honeywellaidc.com Date: 12-Oct-2018 Telecommunication Certification Body UL VS Ltd Unit 3, Horizon Wade Road Kingsland Business Park Basingstoke Hampshire RG24 8AH United Kingdom Subject: FCC Single-Modular Approval Letter FCC ID: HD5-SFPMB To whom it may concern We, Honeywell hereby declare that the product, FCC ID: HD5-SFPMB, has met the single-modular approval requirements of FCC rule part §15.212(a)(1) and this is shown in the table below. Requirement Compliance: Yes or No along with a justification The radio elements must have the radio Yes. This is shown in the Internal Photos exhibit frequency circuitry shielded. Physical components and tuning capacitor(s) may be located external to the shield, but must be on the module assembly The module must have buffered Yes. This is detailed in the Operational Description exhibit modulation/data inputs to ensure that the device will comply with Part 15 requirements with any type of input signal The module must contain power supply Yes. This is detailed in the Operational Description exhibit regulation on the module The module must contain a permanently Yes. This is detailed in the Operational Description, attached antenna, or contain a unique Installation Guide and the Internal Photos exhibits. antenna connector, and be marketed and operated only with specific antenna(s), per Sections 15.203, 15.204(b), 15.204(c), 15.212(a), 2.929(b) The module must demonstrate Yes. This is detailed in the Test Set-Up Photos exhibit. compliance in a stand-alone configuration The module must be labelled with its Yes. This is detailed in the Labelling exhibit. permanently affixed FCC ID label, or use an electronic display (See KDB Publication 784748 about labelling requirements)

The module must comply with all specific Yes. The details are provide in the Users’ Manual exhibit rules applicable to the transmitter (Installation Guide) including all the conditions provided in the integration instructions by the grantee The module must comply with RF Yes. The details are provided in the RF Exposure exhibit. exposure requirements NOTE: This wireless module will only be incorporated into Honeywell products. Sincerely, Michael Robinson Michael.Robinson3@honeywell.com Supervisor Quality Engineer Sr Honeywell International Inc SPS (Safety and Productivity Solutions) Office:+1-315-554-6387


Document Created: 2018-10-12 10:26:01
Document Modified: 2018-10-12 10:26:01
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC