RF Exposure Information

FCC ID: HD5-HONST60Q

RF Exposure Info

Download: PDF
FCCID_4424770

MRT Technology (Suzhou) Co., Ltd Report No.: 1905RSU028—U8 ‘ Phone: +86—512—66308358 Report Version: VO1 Web: www.mrt—cert.com Issue Date: 08—12—2019 RF Exposure Evaluation Declaration FCC ID: HD5S—HONST6OQ APPLICANT: Honeywell International Inc Honeywell Safety and Productivity Solutions Application Type: Class II Permissive Change Product: Wi—Fi module Model No.: HON—ST6OQ Brand Name: Honeywell FCC Rule Part(s): FCC Part 2 (Section 2.1091) KDB 447498 DO1 General RF Exposure Guidance v0O6 IEEE C95.1—1992 _ "[Upi, Reviewed | By: * 4 prnt ]’MH\ s \\\_////+, & \\\\\\ ( Jame Yuan ) fla?g/m 1 4 _ ~ Approved By: fzf']’”\ ww ’7/,\\\\\ [ACCREDITED ( Robin Wu ) Thigl 4sS TenemeraRe The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standards through the calibration of the equipment and evaluated measurement uncertainty herein. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. FCC ID: HD5—HONST6OQ Page Number: 1 of 5

I w i a I‘ Report No.: 1905RSUO028—U8 Revision History 1905RSU028—U8 Rev. 01 Initial Report 08—12—2019 Valid FCC ID: HD5—HONST6OQ Page Number: 2 of 5

I M i a I‘ Report No.: 1905RSUO028—U8 1. PRODUCT INFORMATION 1.1. Equipment Description Wi—Fi module HON—ST6OQ Honeywell 802.11a/b/g/n/ac Dipole Antenna 2.440Bi for 2.4GHz and 5GHz 2.A4GHz: For 802.11b/g/n—HT20: 2412 ~ 2462 MHz For 802.11n—HT4O: 2422 ~ 2452 MHz 5GHz: For 802.11a/n—HT20/ac—VHT20: 5180~5320MHz, 5500~5720MHz, 5745~5825MHz For 802.11n—HT4O/ac—VHT40: 5190~5310MHz, 5510~5710MHz, 5755~5795MHz For 802.11ac—VHT8O: 5210MHz, 5290MHz, 5530MHz, 561 0MHz, 5690MHz, 5775MHz 802.11b: DSSS 802.11g/a/n/ac: OFDM For 2.4GHz Band: 802.11b: 13.88dBm 802.11g: 13.75dBm 802.11n—HT20: 13.90dBm 802.11n—HT4O: 13.78dBm For 5GHz Band: 802.11a: 15.82dBm 802.11n—HT20: 15.92dBm 802.11n—HT4O: 14.14dBm 802.11ac—VHT20: 16.16dBm 802.11ac—VHT40: 14.33dBm 802.11ac—VHT80: 10.04dBm FCC ID: HD5—HONST6OQ Page Number: 3 of 5

JM IVR I Report No.: 1905RSUO028—U8 2. RF Exposure Evaluation 2.1. Limits According to FCC 1.1310:; The criteria listed in the following table shall be used to evaluate the environment impact of human exposure to radio frequency (RF) radiation as specified in 1.1307(b) LIMITS FOR MAXIMUM PERMISSIBLE EXPOSURE (MPE) Frequency Range Electric Field Magnetic Field Power Density Average Time (MHz) Strength (V/m) Strength (A/m) ({mW/cm?) (Minutes) (A) Limits for Occupational/ Control Exposures 300—1500 —— —— 17300 1500—100,000 —— —— 5 (B) Limits for General Population/ Uncontrolled Exposures 300—1500 —— —— 1500 6 1500—100,000 —— —— 1 30 f= Frequency in MHz Calculation Formula: Pd = (Pout*G)/{4*pi*r?) Where Pd = power density in mW/cm* Pout = output power to antenna in mW G = gain of antenna in linear scale Pi= 3.1416 r = distance between observation point and center of the radiator in cm Pd is the limit of MPE, 1mW/em?. If we know the maximum gain of the antenna and the total power input to the antenna, through the calculation, we will know the distance r where the MPE limit is reached. FCC ID: HD5—HONST6OQ Page Number: 4 of 5

I m i a I‘ Report No.: 1905RSUO028—U8 2.2. Test Result of RF Exposure Evaluation Wi—Fi module RF Exposure Evaluation 802.11b/g/n 2412 ~ 2462 13.90 16.34 0.0086 1 802.11a/n/ac 5180 ~ 5825 16.16 18.60 0.0144 1 Host Information (Product name: Printer, M/N: PX940) Bluetooth—LE 2402 ~ 2480 0.69 1.99 0.0003 1 CONCLUSION: Both of the WLAN 2.4GHz or WLAN 5GHz Band and BLE can transmit simultaneously. The Max Power Density at R (20 cm) = 0.0144mW/em* + 0.0003mW/cm*= 0.0147mW/cm* < 1mW/cm*. So the EUT complies with the requirement. The End FCC ID: HD5—HONST6OQ Page Number: 5 of 5


Document Created: 2019-09-02 10:42:27
Document Modified: 2019-09-02 10:42:27
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC