EDA60K-0_SDR Cover Letter

FCC ID: HD5-EDA60K0

Cover Letter(s)

Download: PDF
FCCID_3731742

Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA Non-SDR (Software Defined Radio) Cover Letter Date: Jan 21, 2018 Refer to KDB 442812 D01 SDR apps Guide v02r03. The following six questions can be used for determining if a radio can elect to be, or must be an SDR. 1. Can the RF parameters of the device be altered through software? Yes - go to 2. No, not an SDR Reply: Yes 2. Can third parties not permitted by the Commission through specific filings modify, configure, or load different software, or make configuration settings to operate the device or host hardware radio frequency parameters (frequency range, modulation type, maximum output power or other radio parameters) in any other way than granted (or expected to be granted)? Yes, must be an SDR. No - go to 3. Reply: No

Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA 3. Is the device capable of operating in any other in any other way than granted, or will be, granted? Yes, - go to 4. No - go to 5. Reply: No 4. Is this a Part 15 client Device as defined in Section 15.202 (as opposed to a master device)? Yes, qualifies as a part 15 client devices - go to 5. No, must be an SDR. 5. Does the manufacturer elect SDR? Yes, elects to be an SDR. No, Not an SDR Reply: No Final conclusion: This product shall be approval as a Non-SDR which is declared by the applicant. -------------------------------------------- Name: Michael Robinson / Title: Supervisor Quality Engineer Sr

Honeywell International Inc Honeywell Safety and Productivity Solutions 9680 Old Bailes Road Fort Mill, SC 29707 USA Honeywell International Inc. Tel: 315 554 6387 Fax: none E-mail: michael.robinson3@Honeywell.com


Document Created: 2019-11-18 10:52:30
Document Modified: 2019-11-18 10:52:30
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC