EDA51-SC-QS_Rev B_EN rev3

FCC ID: HD5-EDA510

Users Manual

Download: PDF
FCCID_3874068

Front Panel Rear Panel Open the Package ScanPal™ Series Please check if the following items included in the package: Power Indicator Scan Engine • ScanPal™ Series Mobile Computers; • Main battery (3.8V, lithium ion battery); • 10-watt power adapter; • Replaceable adapter Plugs; • USB charging cable; Speaker Camera • Quick Start Guide. Scan Indicator Battery Cover ScanPal™ Series Mobile Computers Safety Lock Battery Cover Battery Cover EDA51-1 Buckle Handle Safety Button EDA51-0 Quick Start Guide Display Battery Cover Note: EDA51-1 FCC ID is HD5-EDA511 Function Key String Buckle EDA51-0 FCC ID is HD5-EDA510 Remarks: If you ordered accessories for the terminal, please make sure they are also Home Key included in the package; be sure to keep the original packages for ScanPal terminal to be returned for repairing when necessary. Return Key EDA51-SC-QS Rev B Note: End users should not arbitrarily replace the operating system with other operating systems. To update operating system installed on your device, you need to get license from the OS vendors. May/22/2018 EDA51-1/EDA51-0 belongs to ScanPal Series Install the Main Battery Charging / Sync Left Side View Right Side View Replace the battery with wrong models may cause explosion. Please make sure to Synchronous Communication use and dispose the battery in accordance with local regulations. Please recycle the battery when possible. Do not dispose it as household waste Please ensure all kits are dry when connect the mobile device or battery to 1. Open the USB cover at the bottom of ScanPal™ terminal external devices. Damages caused by connecting wet kits are not covered by the 2. Connect ScanPal™ terminal to the computer using the Micro USB cable Power Volume warranty. Button Up Volume ScanPal™ terminal comes with a battery in a separate package. Down Please follow the steps below to install the battery. Scan Scan USB Cover Button Button 1. Press down the battery cover safety button to move the battery cover safety lock to the unlock position at right; 2. Open the battery cover with the battery cover buckle handle ; 3. Insert the battery (Insert the non-connector side first, then press the battery down to establish connection between the battery and the phone) 4. Press down the battery cover (Insert the non-connector side first, then press the battery cover down) 5. Press down the battery cover safety button to move the battery cover safety lock to the lock position at left USB charging cable Charging USB Remarks: Contact Cover Refer to the illustrated installation steps on the following page.

Charging / Sync Suspend / Wake Up the Terminal Install memory card Install SIM Card (Optional) 1. Power off; 1. Power off the device; 2. Press down the battery cover safety button to move the lock to the unlock 2. Press down the battery cover safety button and move the battery cover lock to Charging Suspend / Wake Up the Terminal position at right; the unlock position to the right; 1. Open the USB cover at the bottom of ScanPal™ terminal; 1. Press the power button and then release (less than 2 seconds) 3. Open the battery cover with the battery cover buckle handle ; 3. Open the battery cover using the battery cover notches; 2. Connect ScanPal™ terminal to the power adapter with USB charging cable; 2. To wake up the device from sleep mode, press the power button and then 4. Pull out the battery (First open the battery connector side, then pull out the 4. Pull out the battery: first pull the bottom side, then pull out the battery; 3. Make sure the replaceable adapter plug plugged into the power adapter; release (less than 2 seconds) battery) 5. Insert the SIM card into the SIM card slot until it clicks; 4. Connect the power adapter to the wall plug and start charging for ScanPal™ 5. Insert the Micro SD card to SD card slot until it clicks; 6. Insert the battery: insert the top part first, then press the bottom part to lock it in terminal. Reboot 6. Insert the battery (Insert the non-connector side first, then press the battery place; When something is wrong with the OS, press the reset button and then release to down to establish connection between the battery and the phone); 7. Install the battery cover: insert the bottom part first, then press the top part; Fully charge the ScanPal™ terminal at least 4 hours (depending on the model) restart ScanPal™ terminal 7. Press down the battery cover (Insert the non-connector side first, then press the 8. Press down the battery cover safety button and move the battery cover lock to before using it for the first time. battery cover down); the lock position at the left; Using the device while charging will significantly extend the time required to Power Indicator 8. Press down the battery cover safety button to move the battery cover safety lock 9. Power on the device fully charge. The status of power indicators in non-charging and charging process are to the lock position at left; Nano SIM Card Micro SD illustrated as below: 9. Power on Replaceable adapter plug Non-charging process USB Cover Off Battery power is normal Micro SD Flashing orange Battery power is low Power Charging process adapter Constant green Charging complete Flashing green During charging process, and the Micro USB charging is about to be completed cable Orange During charging process, and the battery Remarks: power is still low It's recommended to use Honeywell's peripherals, batteries, USB charging cables and power adapters. Flashing red Battery is abnormal Note: Damages caused by using non-Honeywell peripherals, batteries, USB charging 1. Only EDA51-1 delivers this feature cables or power adapters are not covered by the warranty. 2. It's recommended to use standard Nano SIM card. Using non-standard Nano Warnings: SIM card may cause the network unusable and even damage the card and Please make sure all kits are dry when use the terminal and battery with other slot; accessories. 3. Damages caused by using non- standard Nano SIM card are not covered by Damages caused by using wet kits may not be covered by the warranty. the warranty. Use Scan Engine Aiming Beam Technical Support Align the aiming beam with the barcodes, and adjust the angle between the The aiming beam gets narrower when the terminal gets closer to the barcodes, For information about technical support, after-sales service and maintenance, beam and the barcodes to get the best results. The recommended range from while it gets wider when the terminal gets farther from the barcodes. please visit www.honeywellaidc.com. the terminal to the barcodes is 7 to 30cm. The smaller the barcodes, the closer the aiming beams should get to the User Documents 1. Tap All Apps > Demos > Scan Demo; barcodes For the local version of this article, please visit www.honeywellaidc.com. 2. Click Scan on the screen or press one of the Scan Buttons; The bigger the barcodes, the father the aiming beams should get to the 3. Center the aiming beam over the barcode; barcodes Patents 4. Adjust the aiming beam: for optimum performance, avoid reflections by For information on patents, please refer to www.honeywellaidc.com/patents. scanning the barcode at a slight angle. Scan the barcode to slowly move the Beam positions when scan QR Code aiming beam over the bar code; Warranty 5. The information is obtained when the barcode is successfully decoded and the Please log into www.honeywellaidc.com/warranty_information for warranty terminal beeps. information on your product. Disclaimer Honeywell International Inc. reserves the rights to modify the specifications and other information mentioned above without prior notification. Readers should consult Honeywell International Inc. to make sure if any changes made any time they read this article. The information in this article does not represent any commitments of Honeywell International Inc. Honeywell International Inc. is not responsible for direct or indirect loss caused by any technical or editing errors or omissions contained in this article. The proprietary information contained in this article is protected by copyright. All rights reserved. Without prior written consent from Honeywell International Inc., any form of photocopy, copy or translation into other languages for any part of Scan Engine this article is not allowed. © 2018 by Honeywell International Inc. All rights reserved. Website: www.honeywellaidc.com

The SAR limit adopted by USA is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The highest SAR value reported to the Federal Communications Commission (FCC) for this device type when it is properly worn on the body is 0.1 90 W /kg. Body SAR is measured with the device at a seperation of 10mm to body while tranmitting at the highest certified output power at all frequency bands for this device.


Document Created: 2018-06-04 14:25:11
Document Modified: 2018-06-04 14:25:11
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC