18C2057R-RF-FCC Part15C-Wireless Charge Rack-CN85-WCR-V1.0 0117

FCC ID: HD5-CX85WCR

Test Report

Download: PDF
FCCID_4132592

Test Report FCC Part15 Subpart C Product Name : Wireless Charge Rack Model No. : CN85-WCR FCC ID : HD5-CX85WCR IC : 1693B-CX85WCR Applicant : HONEYWELL INTERNATIONAL INC Honeywell Safety and Productivity Solutions Address : 9680 OLD BAILES RD FORT MILL SC 29707-7539 Date of Receipt : Dec. 12, 2018 Test Date : Dec. 13, 2018~ Dec. 31, 2018 Issued Date : Jan. 07, 2019 Report No. : 18C2057R-RF-US-P06V05 Report Version : V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by A2LA or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification (Suzhou) Co., Ltd.

Report No.: 18C2057R-RF-US-P06V05 Tes t R e p o r t C e r t i f i c a t i o n Issued Date : Jan. 07, 2019 Report No. : 18C2057R-RF-US-P06V05 Product Name : Wireless Charge Rack Applicant : HONEYWELL INTERNATIONAL INC Honeywell Safety and Productivity Solutions Address : 9680 OLD BAILES RD FORT MILL SC 29707-7539 Manufacturer : 1.HONEYWELL INTERNATIONAL INC Honeywell Safety and Productivity Solutions 2.RAYVAL (SUZHOU) TECHNOLOGIES CO LTD 3.Metro(Suzhou)Technologies Co.,Ltd Address : 1.9680 OLD BAILES RD FORT MILL SC 29707-7539 2.SUCHUN INDUSTRIAL SQUARE, BLDG 15A 428 XINGLONG STR SUZHOU INDUSTRIAL PARK SUZHOU JIANGSU 215126 CHINA 3.No.221 Xinghai street China-Singapore Suzhou Industrial Park Model No. : CN85-WCR FCC ID : HD5-CX85WCR IC 1693B-CX85WCR EUT Voltage : AC 120V/60Hz Test Voltage : AC 120V/60Hz Brand Name : Honeywell Applicable Standard : FCC CFR Title 47 Part 15 Subpart C; ANSI C63.10: 2013 KDB 680106 D01 RF Exposure Wireless Charging Apps v03 RSS-216 Issue 2 Test Result : Complied Performed Location : DEKRA Testing and Certification (Suzhou) Co., Ltd. No.99 Hongye Rd., Suzhou Industrial Park, Suzhou, 215006, Jiangsu, China TEL: +86-512-6251-5088 / FAX: +86-512-6251-5098 FCC Designation Number: CN1199; IC Lab Code: 4075B Documented By : ( Adm. Specialist: Kitty Li ) Reviewed By : (Senior Project Manager: Frank He ) Approved By : (Engineering Supervisor: Jack Zhang) Page: 2 of 31

Report No.: 18C2057R-RF-US-P06V05 TABLE OF CONTENTS Description Page 1. General Information ...................................................................................................... 5 1.1. EUT Description ............................................................................................................ 5 1.2. Antenna information ...................................................................................................... 6 1.3. Mode of Operation ........................................................................................................ 7 1.4. Tested System Details .................................................................................................. 8 1.5. Configuration of Tested System .................................................................................... 9 1.6. EUT Exercise Software ............................................................................................... 10 2. Technical Test ............................................................................................................. 11 2.1. Summary of Test Result .............................................................................................. 11 2.2. Test Environment ........................................................................................................ 11 3. Conducted Emission ................................................................................................... 12 3.1. Test Equipment ........................................................................................................... 12 3.2. Test Setup ................................................................................................................... 12 3.3. Limit ............................................................................................................................ 13 3.4. Test Procedure ............................................................................................................ 13 3.5. Uncertainty .................................................................................................................. 13 3.6. Test Result .................................................................................................................. 14 4. Radiated Emission ...................................................................................................... 17 4.1. Test Equipment ........................................................................................................... 17 4.2. Test Setup ................................................................................................................... 18 4.3. Limit ............................................................................................................................ 19 4.4. Test Procedure ............................................................................................................ 19 4.5. Uncertainty .................................................................................................................. 20 4.6. Test Result .................................................................................................................. 21 5. 20dB Occupied Bandwidth .......................................................................................... 27 5.1. Test Equipment ........................................................................................................... 27 5.2. Test Setup ................................................................................................................... 28 5.3. Limit ............................................................................................................................ 29 5.4. Test Procedure ............................................................................................................ 29 5.5. Uncertainty .................................................................................................................. 29 5.6. Test Result .................................................................................................................. 30 6. Antenna Requirement ................................................................................................. 31 6.1. Requirement ............................................................................................................... 31 6.2. Result .......................................................................................................................... 31 Page: 3 of 31

Report No.: 18C2057R-RF-US-P06V05 History of This Test Report REPORT NO. VERSION DESCRIPTION ISSUED DATE 18C2057R-RF-US-P06V05 V1.0 Initial Issued Report Jan. 07, 2019 Page: 4 of 31

Report No.: 18C2057R-RF-US-P06V05 1. General Information 1.1. EUT Description Product Name Wireless Charge Rack Model No. CN85-WCR Working Voltage AC 120V/60Hz Frequency Range 110kHz~145KHz Type of Modulation ASK Page: 5 of 31

Report No.: 18C2057R-RF-US-P06V05 1.2. Antenna information Model No. N/A Antenna manufacturer N/A Antenna Delivery 1*TX+1*RX 2*TX+2*RX 3*TX+3*RX Antenna technology SISO Basic CDD MIMO Sectorized Beam-forming Antenna Type Dipole External Sectorized PIFA PCB Internal Ceramic Chip Antenna Loop antenna Type F antenna Page: 6 of 31

Report No.: 18C2057R-RF-US-P06V05 1.3. Mode of Operation DEKRA has verified the construction and function in typical operation. All the test modes were carried out with the EUT in normal operation, which was shown in this test report and defined as: Test Mode Mode 1: Transmit Note: 1. Regards to the frequency band operation: the lowest､middle and highest frequency of channel were selected to perform the test, then shown on this report. 2. For portable device, radiated spurious emission was verified over X, Y, Z Axis, and shown the worst case on this report. Page: 7 of 31

Report No.: 18C2057R-RF-US-P06V05 1.4. Tested System Details The types for all equipments, plus descriptions of all cables used in the tested system (including inserted cards) are: Product Manufacturer Model No. Serial No. Power Cord 1 N/A N/A N/A N/A N/A Page: 8 of 31

Report No.: 18C2057R-RF-US-P06V05 1.5. Configuration of Tested System Test setup Diagram- Radiated Emission Page: 9 of 31

Report No.: 18C2057R-RF-US-P06V05 1.6. EUT Exercise Software 1 Setup the EUT and simulators as shown on above. 2 Turn on the power of equipment. 3 Start to continue transmit. Page: 10 of 31

Report No.: 18C2057R-RF-US-P06V05 2. Technical Test 2.1. Summary of Test Result No deviations from the test standards Deviations from the test standards as below description: Performed Test Item Normative References Limit Result Conducted Emission FCC CFR Title 47 Part 15 Subpart C FCC 15.207 N/A Section 15.207 Field Strength of Spurious FCC CFR Title 47 Part 15 Subpart C FCC 15.209 PASS Section 15.209 Channel Bandwidth FCC CFR Title 47 Part 15 Subpart C FCC 15.215 PASS Section 15.215(c) Antenna Requirement FCC CFR Title 47 Part 15 Subpart C: Section FCC 15.203 PASS 15.203 Performed Test Item Normative References Limit Result Conducted Emission RSS 216: Issue 2 Clause 6.2.2.1 RSS Gen N/A Field Strength of Spurious RSS 216: Issue 2 Clause 6.2.2.2 RSS Gen PASS Channel Bandwidth RSS Gen: Issue 5 Clause 6.7 RSS Gen PASS Antenna Requirement RSS Gen: Issue 5 Clause 6.8 RSS Gen PASS 2.2. Test Environment Items Required (IEC 68-1) Actual Temperature (C) 15-35 21 Humidity (%RH) 25-75 50 Barometric pressure (mbar) 860-1060 950-1000 Page: 11 of 31

Report No.: 18C2057R-RF-US-P06V05 3. Conducted Emission 3.1. Test Equipment Conducted Emission / TR-1 Instrument Manufacturer Type No. Serial No. Cal. Date Cal. Due Date EMI Test Receiver R&S ESCI 100726 2018.03.29 2019.03.28 Two-Line V-Network R&S ENV216 100043 2018.03.29 2019.03.28 Two-Line V-Network R&S ENV216 100044 2018.09.17 2019.09.16 50ohm Coaxial Anritsu MP59B 6200464462 2018.03.02 2019.03.01 Switch 50ohm Termination SHX TF2 07081401 2018.09.17 2019.09.16 Temperature/Humidity zhicheng ZC1-2 TR1-TH 2018.01.04 2019.01.03 Meter Note: All equipment are calibrated with traceable calibrations. Each calibration is traceable to the national or international standards. 3.2. Test Setup Page: 12 of 31

Report No.: 18C2057R-RF-US-P06V05 3.3. Limit FCC Part 15 Subpart C Paragraph 15.207 Limits Frequency QP AV (MHz) (dBuV) (dBuV) 0.15 - 0.50 66 - 56 56 – 46 0.50 - 5.0 56 46 5.0 - 30 60 50 Note 1: The lower limit shall apply at the transition frequencies. Note 2: The limit decreases linearly with the logarithm of the frequency in the range 0.15 MHz to 0.5 MHz. 3.4. Test Procedure The EUT was setup according to ANSI C63.10 requirements. The EUT was placed on a platform of nominal size, 1 m by 1.5 m, raised 80 cm above the conducting ground plane. The vertical conducting plane was located 40 cm to the rear of the EUT. All other surfaces of EUT were at least 80 cm from any other grounded conducting surface. The EUT and simulators are connected to the main power through a line impedance stabilization network (LISN). The LISN provides a 50 ohm /50uH coupling impedance for the measuring equipment. The peripheral devices are also connected to the main power through a LISN. (Please refer to the block diagram of the test setup and photographs) Each current-carrying conductor of the EUT power cord, except the ground (safety) conductor, was individually connected through a LISN to the input power source. The excess length of the power cord between the EUT and the LISN receptacle were folded back and forth at the center of the lead to form a bundle not exceeding 40 cm in length. Conducted emissions were investigated over the frequency range from 0.15MHz to 30MHz using a receiver bandwidth of 9 kHz. 3.5. Uncertainty The measurement uncertainty is defined as ± 2.02 dB Page: 13 of 31

Report No.: 18C2057R-RF-US-P06V05 3.6. Test Result Engineer: Damon Site: TR1 Time: 2019/01/04 - 16:02 Limit: FCC_Part15.207_CE_AC Power Margin: 0 Probe: ENV216_101190(0.009-30MHz) Polarity: Neutral EUT: Wireless Charge Rack Power: AC 120V/60Hz Note: Mode1 No Mark Frequency Measure Level Reading Level Over Limit Limit Probe Cable Amp Type (MHz) (dBuV) (dBuV) (dB) (dBuV) (dB) (dB) (dB) 1 0.154 53.687 44.065 -12.094 65.781 9.593 0.029 0.000 QP 2 0.154 40.571 30.950 -15.210 55.781 9.593 0.029 0.000 AV 3 0.206 48.660 39.032 -14.705 63.365 9.599 0.029 0.000 QP 4 0.206 38.265 28.638 -15.100 53.365 9.599 0.029 0.000 AV 5 0.278 40.144 30.514 -20.731 60.875 9.597 0.033 0.000 QP 6 0.278 32.444 22.814 -18.431 50.875 9.597 0.033 0.000 AV 7 0.442 32.786 23.154 -24.238 57.024 9.592 0.041 0.000 QP 8 0.442 22.132 12.499 -24.892 47.024 9.592 0.041 0.000 AV 9 10.034 48.846 38.854 -11.154 60.000 9.791 0.201 0.000 QP 10 * 10.034 39.907 29.915 -10.093 50.000 9.791 0.201 0.000 AV 11 17.750 38.466 28.114 -21.534 60.000 10.081 0.271 0.000 QP 12 17.750 34.178 23.826 -15.822 50.000 10.081 0.271 0.000 AV Page: 14 of 31

Report No.: 18C2057R-RF-US-P06V05 Engineer: Damon Site: TR1 Time: 2019/01/04 - 16:02 Limit: FCC_Part15.207_CE_AC Power Margin: 0 Probe: ENV216_101190(0.009-30MHz) Polarity: Line EUT: Wireless Charge Rack Power: AC 120V/60Hz Note: Mode1 No Mark Frequency Measure Level Reading Level Over Limit Limit Probe Cable Amp Type (MHz) (dBuV) (dBuV) (dB) (dBuV) (dB) (dB) (dB) 1 0.154 50.825 41.187 -14.956 65.781 9.609 0.029 0.000 QP 2 0.154 36.821 27.184 -18.960 55.781 9.609 0.029 0.000 AV 3 0.210 48.650 39.021 -14.555 63.205 9.601 0.029 0.000 QP 4 0.210 39.497 29.867 -13.708 53.205 9.601 0.029 0.000 AV 5 0.278 40.258 30.624 -20.617 60.875 9.600 0.033 0.000 QP 6 0.278 33.413 23.780 -17.462 50.875 9.600 0.033 0.000 AV 7 0.926 36.398 26.733 -19.602 56.000 9.608 0.058 0.000 QP 8 0.926 19.010 9.344 -26.990 46.000 9.608 0.058 0.000 AV 9 10.030 50.145 40.173 -9.855 60.000 9.771 0.201 0.000 QP 10 * 10.030 41.988 32.016 -8.012 50.000 9.771 0.201 0.000 AV 11 11.930 48.177 38.136 -11.823 60.000 9.820 0.221 0.000 QP 12 11.930 39.652 29.611 -10.348 50.000 9.820 0.221 0.000 AV Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. Page: 15 of 31

Report No.: 18C2057R-RF-US-P06V05 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Factor(Probe+Cable-Amp). Page: 16 of 31

Report No.: 18C2057R-RF-US-P06V05 4. Radiated Emission 4.1. Test Equipment Radiated Emission / AC-1 Instrument Manufacturer Type No. Serial No. Cal. Date Cal. Due Date EMI Test Receiver R&S ESCI 100573 2018.03.29 2019.03.28 Loop Antenna R&S HFH2-Z2 833799/003 2018.11.25 2019.11.24 Bilog Antenna Teseq GmbH CBL6112D 27611 2018.10.11 2019.10.10 SUCOFLEX Coaxial Cable Huber+Suhner 106 AC2-C 2018.03.02 2019.03.01 Temperature/Humidity Meter Zhicheng ZC1-2 AC2-TH 2018.01.08 2019.01.07 Note: All equipment are calibrated with traceable calibrations. Each calibration is traceable to the national or international standards. Page: 17 of 31

Report No.: 18C2057R-RF-US-P06V05 4.2. Test Setup 9kHz~30MHz Test Setup: 30MHz~1GHz Test Setup: Page: 18 of 31

Report No.: 18C2057R-RF-US-P06V05 4.3. Limit Field strength of emissions from intentional radiators operated under 15.209(a) shall not exceed the following: FCC Part 15.209(a) Fundamental frequency Field strength of Field strength of spurious (MHz) fundamental (μV/m) emissions (μV/m) 0.009-0.490 2400/F(kHz) 300 0.490-1.705 24000/F(kHz) 30 1.705-30.0 30 30 30-88 100** 3 88-216 150** 3 216-960 200** 3 Above 960 500 3 (1) The tighter limits apply at the band edges. (2) Measurements were performed at 10m and the data was extrapolated to the specified measurement distance of 300m using the square of an inverse linear distance extrapolation factor (40 dB/decade) as specified in §15.31(f)(2). Extrapolation Factor = 40 log10(300/10) = 59dB for example. Measurements were performed at 10m and the data was extrapolated to the specified measurement distance of 30m using the square of an inverse linear distance extrapolation factor (40 dB/decade) as specified in §15.31(f)(2). Extrapolation Factor = 40 log10(30/10) = 19dB for example. (3) All measurements were performed using a loop antenna. The antenna was positioned in three orthogonal positions (X front, Y side, Z top) and the position with the highest emission level was recorded. 4.4. Test Procedure The EUT was setup according to ANSI C63.10 for compliance to FCC 47CFR 15.209 requirements. The EUT is placed on a turn table which is 0.8 meter above ground. The turn table is rotated 360 degrees to determine the position of the maximum emission level. The EUT was positioned such that the distance from antenna to the EUT was 10 meters. The antenna is scanned from 1 meter to 4 meters to find out the maximum emission level. This Page: 19 of 31

Report No.: 18C2057R-RF-US-P06V05 is repeated for both horizontal and vertical polarization of the antenna. In order to find the maximum emission, all of the interface cables were manipulated according to ANSI C63.10 on radiated measurement. The frequency range from 9kHz to 10th harmonic is checked. 4.5. Uncertainty The measurement uncertainty is defined as ± 3.80 dB Page: 20 of 31

Report No.: 18C2057R-RF-US-P06V05 4.6. Test Result Site: AC1 Time: 2018/12/17 - 10:08 Limit: FCC-15.209(10m) 9K-30M Margin: 0 Probe: loop antenna(0.009-30MHz) Polarity: Vertical EUT: Wireless Charge Rack Power: AC 120V/60Hz Note: Mode 1: N Mar Frequency Measure Reading Over Limit Probe Cable Amp Ant Table Typ o k (MHz) Level Level Limit (dBuV/ (dB/m) (dB) (dB) Pos Pos e (dBuV/m) (dBuV) (dB) m) (cm) (deg) 1 0.064 43.289 32.435 -47.277 90.565 10.800 0.054 0.000 0 0 QP 2 0.089 39.145 28.267 -48.556 87.701 10.800 0.078 0.000 0 0 QP 3 0.116 39.068 28.163 -46.332 85.400 10.800 0.105 0.000 0 0 QP 4 0.128 40.638 29.722 -43.906 84.545 10.800 0.116 0.000 0 0 QP 5 0.141 39.679 28.750 -44.026 83.705 10.800 0.129 0.000 0 0 QP 6 * 0.145 44.099 33.166 -39.363 83.462 10.800 0.133 0.000 0 0 QP Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Factor(Probe+Cable-Amp). Page: 21 of 31

Report No.: 18C2057R-RF-US-P06V05 Site: AC1 Time: 2018/12/17 - 10:54 Limit: FCC-15.209(10m) 9K-30M Margin: 0 Probe: loop antenna(0.009-30MHz) Polarity: Vertical EUT: Wireless Charge Rack Power: AC 120V/60Hz Note: Mode 1: No Mark Frequency Measure Level Reading Over Limit Probe Cable Amp Ant Table Type (MHz) (dBuV/m) Level Limit (dBuV/m (dB/m) (dB) (dB) Pos Pos (dBuV) (dB) ) (cm) (deg) 1 1.046 28.807 17.228 -17.492 46.298 10.600 0.979 0.000 0 0 QP 2 * 1.340 27.155 15.572 -16.992 44.147 10.600 0.983 0.000 0 0 QP 3 2.075 26.599 15.006 -22.028 48.627 10.600 0.993 0.000 0 0 QP 4 3.493 29.858 18.242 -18.769 48.627 10.600 1.016 0.000 0 0 QP 5 7.650 26.358 14.775 -22.270 48.627 10.500 1.083 0.000 0 0 QP 6 13.568 25.575 14.105 -23.053 48.627 10.300 1.170 0.000 0 0 QP Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Factor(Probe+Cable-Amp). Page: 22 of 31

Report No.: 18C2057R-RF-US-P06V05 Site: AC1 Time: 2018/12/17 - 11:03 Limit: FCC-15.209(10m) 9K-30M Margin: 0 Probe: loop antenna(0.009-30MHz) Polarity: Horizontal EUT: Wireless Charge Rack Power: AC 120V/60Hz Note: Mode 1: No Mark Frequency Measure Level Reading Level Over Limit Probe Cable Amp Ant Table Type (MHz) (dBuV/m) (dBuV) Limit (dBuV/ (dB/m) (dB) (dB) Pos Pos (dB) m) (cm) (deg) 1 0.090 38.852 27.973 -48.752 87.604 10.800 0.079 0.000 0 0 QP 2 0.102 32.925 22.034 -53.592 86.517 10.800 0.091 0.000 0 0 QP 3 0.116 39.053 28.148 -46.347 85.400 10.800 0.105 0.000 0 0 QP 4 0.128 39.533 28.617 -45.011 84.545 10.800 0.116 0.000 0 0 QP 5 0.141 39.971 29.042 -43.734 83.705 10.800 0.129 0.000 0 0 QP 6 * 0.145 40.415 29.482 -43.047 83.462 10.800 0.133 0.000 0 0 QP Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Factor(Probe+Cable-Amp). Page: 23 of 31

Report No.: 18C2057R-RF-US-P06V05 Site: AC1 Time: 2018/12/17 - 11:01 Limit: FCC-15.209(10m) 9K-30M Margin: 0 Probe: loop antenna(0.009-30MHz) Polarity: Horizontal EUT: Wireless Charge Rack Power: AC 120V/60Hz Note: Mode 1: No Mark Frequency Measure Level Reading Level Over Limit Probe Cable Amp Ant Table Type (MHz) (dBuV/m) (dBuV) Limit (dBuV/ (dB/m) (dB) (dB) Pos Pos (dB) m) (cm) (deg) 1 * 3.534 30.383 18.766 -18.244 48.627 10.600 1.017 0.000 0 0 QP 2 7.564 26.825 15.244 -21.802 48.627 10.500 1.081 0.000 0 0 QP 3 8.807 25.716 14.114 -22.912 48.627 10.500 1.102 0.000 0 0 QP 4 16.023 25.362 13.859 -23.265 48.627 10.300 1.203 0.000 0 0 QP 5 17.780 26.587 14.858 -22.040 48.627 10.500 1.229 0.000 0 0 QP 6 20.120 26.283 14.426 -22.344 48.627 10.600 1.257 0.000 0 0 QP Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Factor(Probe+Cable-Amp). Page: 24 of 31

Report No.: 18C2057R-RF-US-P06V05 Site: AC3 Time: 2018/12/24 - 18:20 Limit: FCC_Part15.209_RE(3m) Margin: 0 Probe: AC3_3m (30-1000MHz) Polarity: Horizontal EUT: Wireless Charge Rack Power: AC 120V/60Hz Note: Mode 1: No Mark Frequency Measure Level Reading Level Over Limit Probe Cable Amp Ant Table Type (MHz) (dBuV/m) (dBuV) Limit (dBuV/ (dB/m) (dB) (dB) Pos Pos (dB) m) (cm) (deg) 1 155.372 28.696 11.330 -14.804 43.500 10.263 7.103 0.000 0 0 QP 2 205.570 30.095 12.452 -13.405 43.500 10.342 7.301 0.000 0 0 QP 3 221.818 30.449 12.227 -15.551 46.000 10.865 7.357 0.000 0 0 QP 4 274.198 29.282 9.467 -16.718 46.000 12.279 7.536 0.000 0 0 QP 5 427.579 32.964 5.930 -13.036 46.000 19.053 7.981 0.000 0 0 QP 6 * 618.911 35.765 6.377 -10.235 46.000 20.908 8.480 0.000 0 0 QP Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Factor(Probe+Cable-Amp). Page: 25 of 31

Report No.: 18C2057R-RF-US-P06V05 Site: AC3 Time: 2018/12/24 - 18:25 Limit: FCC_Part15.209_RE(3m) Margin: 0 Probe: AC3_3m (30-1000MHz) Polarity: Vertical EUT: Wireless Charge Rack Power: AC 120V/60Hz Note: Mode 1: No Mark Frequency Measure Level Reading Level Over Limit Probe Cable Amp Ant Table Type (MHz) (dBuV/m) (dBuV) Limit (dBuV/ (dB/m) (dB) (dB) Pos Pos (dB) m) (cm) (deg) 1 100.082 29.147 7.066 -14.353 43.500 15.232 6.850 0.000 0 0 QP 2 203.872 36.810 13.871 -6.690 43.500 15.643 7.296 0.000 0 0 QP 3 247.038 35.521 12.195 -10.479 46.000 15.874 7.451 0.000 0 0 QP 4 310.209 33.046 7.619 -12.954 46.000 17.778 7.649 0.000 0 0 QP 5 769.019 39.255 6.932 -6.745 46.000 23.508 8.815 0.000 0 0 QP 6 * 943.376 40.529 6.192 -5.471 46.000 25.149 9.189 0.000 0 0 QP Note: 1. All Readings below 1GHz are Quasi-Peak, above are performed with peak and/or average measurements as necessary. 2. " * ", means this data is the worst emission level. 3. Measurement Level = Reading Level + Factor(Probe+Cable-Amp). Test Result Pass Page: 26 of 31

Report No.: 18C2057R-RF-US-P06V05 5. 20dB Occupied Bandwidth 5.1. Test Equipment 20dBc Occupied Bandwidth / AC-1 Instrument Manufacturer Type No. Serial No. Cal. Date Cal. Due Date EMI Test Receiver R&S ESCI 100573 2018.03.29 2019.03.28 Loop Antenna R&S HFH2-Z2 833799/003 2018.11.25 2019.11.24 Bilog Antenna Teseq GmbH CBL6112D 27611 2018.10.11 2019.10.10 SUCOFLEX Coaxial Cable Huber+Suhner 106 AC2-C 2018.03.02 2019.03.01 Temperature/Humidity Meter Zhicheng ZC1-2 AC2-TH 2018.01.08 2019.01.07 Note: All equipment are calibrated with traceable calibrations. Each calibration is traceable to the national or international standards. Page: 27 of 31

Report No.: 18C2057R-RF-US-P06V05 5.2. Test Setup 9kHz~30MHz Test Setup: Page: 28 of 31

Report No.: 18C2057R-RF-US-P06V05 5.3. Limit Intentional radiators operating under the alternative provisions to the general emission limits, as contained in §§15.215(c), must be designed to ensure that the 20 dB bandwidth of the emission, or whatever bandwidth may otherwise be specified in the specific rule section under which the equipment operates, is contained within the frequency band designated in the rule section under which the equipment is operated. 5.4. Test Procedure The bandwidth of the fundamental frequency was measured by spectrum analyzer with the RBW 1%~5% of 20dBc bandwidth and the VBW three times of the RBW. The 20dB bandwidth is defined as the total spectrum the power of which is higher than peak power minus 20dB. 5.5. Uncertainty The measurement uncertainty is defined as ± 10 Hz Page: 29 of 31

Report No.: 18C2057R-RF-US-P06V05 5.6. Test Result Product Wireless Charge Rack Test Item 20dB Occupied Bandwidth Test Mode Mode 1: Transmit Date of Test 2018/12/30 Test Site AC-1 Frequency 20dB Bandwidth 99% Bandwidth (kHz) (kHz) (kHz) 110~145 0.194 0.524 Test Result Pass Page: 30 of 31

Report No.: 18C2057R-RF-US-P06V05 6. Antenna Requirement 6.1. Requirement Antenna Requirement Limit An intentional radiator shall be designed to ensure that no antenna other than that furnished by the responsible party shall be used with the device. The use of a permanently attached antenna or of an antenna that uses a unique coupling to the intentional radiator shall be considered sufficient to comply with the provisions of this section. The manufacturer may design the unit so that a broken antenna can be replaced by the user, but the use of a standard antenna jack or electrical connector is prohibited. This requirement does not apply to carrier current devices or to devices operated under the provisions of §15.211, §15.213, §15.217, §15.219, or §15.221. Further, this requirement does not apply to intentional radiators that must be professionally installed, such as perimeter protection systems and some field disturbance sensors, or to other intentional radiators which, in accordance with §15.31(d), must be measured at the installation site. However, the installer shall be responsible for ensuring that the proper antenna is employed so that the limits in this part are not exceeded. 6.2. Result Antenna Connector Construction The use of a permanently attached antenna The antenna use of a unique coupling to the intentional radiator The use of a nonstandard antenna jack or electrical connector Please refer to the attached document “Internal Photograph” to show the antenna connector. The End Page: 31 of 31


Document Created: 2019-03-26 22:59:36
Document Modified: 2019-03-26 22:59:36
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC