RF Test Report-BLE

FCC ID: HD5-CT60L0N

Test Report

Download: PDF
FCCID_3685159

FCC Test Report (BT-LE) Report No.: RF170908C01A-3 FCC ID: HD5-CT60L0N Test Model: CT60L0N Received Date: Oct. 30, 2017 Test Date: Nov. 01 to 06, 2017 Issued Date: Nov. 15, 2017 Applicant: Honeywell International Inc. Address: 9680 Old Bailes Road, Fort Mill, SC 29707 USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location : E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF170908C01A-3 Page No. 1 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT (BT-LE) ................................................................................................... 6 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal .................................................................................................................. 12 3.4 Description of Support Units ............................................................................................................. 13 3.4.1 Configuration of System under Test .................................................................................................. 13 3.5 General Description of Applied Standards ........................................................................................ 14 4 Test Types and Results ...................................................................................................................... 15 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 15 4.1.2 Test Instruments ................................................................................................................................ 16 4.1.3 Test Procedures ................................................................................................................................. 17 4.1.4 Deviation from Test Standard ............................................................................................................ 17 4.1.5 Test Setup .......................................................................................................................................... 18 4.1.6 EUT Operating Conditions................................................................................................................. 19 4.1.7 Test Results ....................................................................................................................................... 20 4.2 Conducted Output Power Measurement ........................................................................................... 25 4.2.1 Limits OF Conducted Output Power Measurement .......................................................................... 25 4.2.2 Test Setup .......................................................................................................................................... 25 4.2.3 Test Instruments ................................................................................................................................ 25 4.2.4 Test Procedures ................................................................................................................................. 25 4.2.5 Deviation from Test Standard ............................................................................................................ 25 4.2.6 EUT Operating Conditions................................................................................................................. 25 4.2.7 Test Results ....................................................................................................................................... 26 5 Pictures of Test Arrangements .......................................................................................................... 27 Appendix – Information on the Testing Laboratories ................................................................................ 28 Report No.: RF170908C01A-3 Page No. 2 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

Release Control Record Issue No. Description Date Issued RF170908C01A-3 Original release. Nov. 15, 2017 Report No.: RF170908C01A-3 Page No. 3 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

1 Certificate of Conformity Product: Dolphin CT60 Brand: Honeywell Test Model: CT60L0N Sample Status: ENGINEERING SAMPLE Applicant: Honeywell International Inc. Test Date: Nov. 01 to 06, 2017 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Nov. 15, 2017 Claire Kuan / Specialist Approved by : , Date: Nov. 15, 2017 May Chen / Manager Report No.: RF170908C01A-3 Page No. 4 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

Eooert venitas 2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (SECTION 15.247) FCC Test Item Result Remarks Clause 15.205 & 209 Radiated Emissions & Band Edge Meet the requirement of limit. &'15 247(d) Measurement PASS Minimum passing margin is —10.40B at ' 2483.50MHz & 2390.00MHz. 15.247(b) Conducted power PASS Meet the requirement of limit. Note: This report is supplementary report. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16—4—2: Measurement Frequency EXpanifigzl;?fsnalnty 30MHz ~ 1GHz iGnz — sGnz 24e dB 5.30 a6 adiated Emissi Radiated Emissions up to 1 GH GHz 6GHz ~ 18GHz 91 d dB 4.91 Radiated Emissions above 1 GHz 5.30 dB 18GHz ~40GHz 2.2 Modification Record There were no modifications required for compliance. Report No.: RF170908C01A—3 Page No. 5/ 28 Report Format Version: 6.1.1 Reference No.: 171030022

Eooert venitas 3 General Information 3.1 General Description of EUT (BT—LE) Product Dolphin CT60 Brand Honeywell Test Model CT6OLON Status of EUT ENGINEERING SAMPLE HW Version V1.0 SW Version 249D HW P/N DVT2.2 3.6Vdc from battery Power Supply Rating 5Vdc from USB interlace Modulation Type GESK Modulation Technology DTS Transfer Rate Up to 2Mbps Operating Frequency 2402MHz ~ 2480MHz Number of Channel 40 LE 1M: 1.355mW Output Power LE 2M ( BT 5.0 ): 1.199mW Antenna Type Refer to Note Antenna Connector Refer to Note Accessory Device Battery x 1 Data Cable Supplied USB snap—on adapter x 1 (1.25m, Shielded with two cores) Note: 1. This report is prepared for FCC Class II change. The difference compared with the Report No.: RF170908C01—3 design is as the following: +4 The change list as below table: BOM Layout No. Change Item Change Change 1.U2101 SIM_SWIO_1 connect to SIM1 11301 1 |2.U2101 SIM_SWIO_2 connect to SIM1 11303 Yes Yes 3. SIM powers path change , Add a pull—up 100K resistor to VREG_L11A_1P8 Ves Ves at 11202 pin—34 and connect 11202 pin—35 to GPIO_56 1. Pull—down WIPWR_CHG_OK. 3 |2. There is divided voltage 1.8V from VDC_IN by 180K and 100K resistors to Yes Yes QI_PMA_ON 4 Add more vias to mic pads to makethe pads hold. No Yes 5 |They need to be shifted base on MD‘s drawing. No Yes 6 Add more vias to the solder pads to make them hold better. No Ves (SW1401~SW1406) 7 |Circuit change between J2003 and U2001 Yes Yes 8 Remove U1901 circuit, just keep J1901,L1906(DNI),R1910(OR), Ves Ves E1911(DNI),EMI1901 from original for RF. 9 1.Remove U1801 circuit,just keep Ves Ves EMI1801,EMI1802,R1813,R1812,L1806,11801,R1809,R1810,R1811 for RF. 10 |AIN1 pin needs to be pulled down No Yes Report No.: RF170908C01A—3 Page No. 6 / 28 Report Format Version: 6.1.1 Reference No.: 171030022

BOM Layout No. Change Item Change Change CT50 pad size is 2.0x3.0mm but MD team suggests pad size is 1.5x3.0mm 11 No Yes because receiver spec suggested having 0.5mm gape requirement. 12 Moving camera's test points x 7 pcs to left No Yes 13 Moving U1107 circuit to right for 0.5mm No Yes 14 Add additional vias on the battery connector pads No Yes RF team needs to have NFC circuit changes and matching components value 15 Yes Yes changes. 16 Open a ground pad to contact receiver's back side metal No Yes 17 R401 needs to be changed to 33 Ohm Yes No 18 Put R1219 and R1220 Yes No 19 Change Tool1716 to PTH. No Yes Add 0.5pF to USIM2_DATA_CONN, USIM1_DATA_CONN between system 20 Yes Yes GND,instead to SIM GND 21 Add Ferried Bead and capacitor on Vibrator driving line. Yes Yes 22 Remove R505,C512,C513 Yes Yes 2. According to above conditions, only radiated emissions (Above 1GHz test: only LE 1M modulation test) and maximum peak output power test item needs to be performed. And all data was verified to meet the requirements. 3. There are WLAN, Bluetooth and NFC technology used for the EUT. 4. Simultaneously transmission condition. Condition Technology 1 WLAN 2.4GHz NFC 2 WLAN 5GHz NFC 3 Bluetooth NFC Note: The emission of the simultaneous operation has been evaluated and no non-compliance was found. 5. The EUT needs to be supplied from battery, the information is as below table: Brand Model No. Spec. Inventus CT50-BTSC 3.6Vdc, 4040mAh, 14.6Wh 6. The antennas provided to the EUT, please refer to the following table: WLAN / Bluetooth Antenna Spec. Antenna Gain Frequency rang Antenna No. include path loss Antenna type Connector type (GHz) (dBi) 0.62 2.4~2.4835 1.14 5.15~5.25 1 1.14 5.25~5.35 PIFA UFL 1.14 5.47~5.725 1.14 5.725~5.85 NFC Antenna Spec. Frequency rang Antenna No. Antenna type Connector type (MHz) 1 13~14 Loop NA Note: 1. The antenna has path loss. 2.4GHz: 1dB; 5GHz: 1.7dB Report No.: RF170908C01A-3 Page No. 7 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

7. In the original test report, for the radiated emissions, the EUT was pre-tested under the following modes: Test Mode Description Mode A Power from laptop Mode B Power from adapter From the above modes, the worst case was found in Mode A. Therefore only the test data of the mode was recorded in this report. 8. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF170908C01A-3 Page No. 8 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

3.2 Description of Test Modes 40 channels are provided to this EUT: FREQ. FREQ. FREQ. FREQ. CHANNEL CHANNEL CHANNEL CHANNEL (MHz) (MHz) (MHz) (MHz) 0 2402 10 2422 20 2442 30 2462 1 2404 11 2424 21 2444 31 2464 2 2406 12 2426 22 2446 32 2466 3 2408 13 2428 23 2448 33 2468 4 2410 14 2430 24 2450 34 2470 5 2412 15 2432 25 2452 35 2472 6 2414 16 2434 26 2454 36 2474 7 2416 17 2436 27 2456 37 2476 8 2418 18 2438 28 2458 38 2478 9 2420 19 2440 29 2460 39 2480 Report No.: RF170908C01A-3 Page No. 9 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

3.2.1 Test Mode Applicability and Tested Channel Detail EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE1G RE<1G APCM - √ √ √ Power from Laptop Where RE1G: Radiated Emission above 1GHz RE<1G: Radiated Emission below 1GHz APCM: Antenna Port Conducted Measurement NOTE: In the oritinal test repot, the EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Z-plane (below 1GHz) & X-plane (Above 1GHz). NOTE: “-”means no effect. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE DATA RATE (Mbps) 0 to 39 0, 19, 39 GFSK 1 Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE DATA RATE (Mbps) 0 to 39 0 GFSK 1 0 to 39 39 GFSK 2 Antenna Port Conducted Measurement: This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE DATA RATE (Mbps) 0 to 39 0, 19, 39 GFSK 1 0 to 39 0, 19, 39 GFSK 2 Report No.: RF170908C01A-3 Page No. 10 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

Test Condition: INPUT POWER APPLICABLE TO ENVIRONMENTAL CONDITIONS TESTED BY (System) RE1G 24deg. C, 67%RH 120Vac, 60Hz Rey Chen RE<1G 22deg. C, 63%RH 120Vac, 60Hz Rey Chen APCM 25deg. C, 60%RH 120Vac, 60Hz Anderson Chen Report No.: RF170908C01A-3 Page No. 11 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

3.3 Duty Cycle of Test Signal LE 1M: Duty cycle of test signal is < 98 %, duty factor shall be considered. Duty cycle = 0.388 ms/0.624 ms = 0.622, Duty factor = 10 * log( 1/0.622) = 2.06 LE 2M: Duty cycle of test signal is < 98 %, duty factor shall be considered. Duty cycle = 0.205 ms/0.627 ms = 0.327, Duty factor = 10 * log( 1/0.327) = 4.86 Report No.: RF170908C01A-3 Page No. 12 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

3.4 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Laptop HP Pavilion 14-ab023TU 5CD5340WXZ FCC DoC Provided by Lab B. Micro SD Card Transcend 16GB NA NA Provided by Lab Note: 1. All power cords of the above support units are non-shielded (1.8m). Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) 1. USB Charging Cable 1 1.25 Yes 2 Supplied by client(for RF Setup) Note: The core(s) is(are) originally attached to the cable(s). 3.4.1 Configuration of System under Test Report No.: RF170908C01A-3 Page No. 13 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

3.5 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) KDB 558074 D01 DTS Meas Guidance v04 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. NOTE: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF170908C01A-3 Page No. 14 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power: Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF170908C01A-3 Page No. 15 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

4.1.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY54450088 July 08, 2017 July 07, 2018 Keysight (*) Pre-Amplifier EMC001340 980142 Jan. 20, 2016 Jan. 19, 2018 EMCI (*) Loop Antenna EM-6879 264 Dec. 16, 2016 Dec. 15, 2018 Electro-Metrics LOOPCAB-001 RF Cable NA Jan. 17, 2017 Jan. 16, 2018 LOOPCAB-002 Pre-Amplifier ZFL-1000VH2B AMP-ZFL-01 Nov. 10, 2016 Nov. 09, 2017 Mini-Circuits Trilog Broadband Antenna VULB 9168 9168-406 Dec. 13, 2016 Dec. 12, 2017 SCHWARZBECK 966-4-1 RF Cable 8D 966-4-2 Apr. 01, 2017 Mar. 31, 2018 966-4-3 Fixed attenuator UNAT-5+ PAD-3m-4-01 Oct. 03, 2017 Oct. 02, 2018 Mini-Circuits Horn_Antenna BBHA 9120D 9120D-783 Dec. 27, 2016 Dec. 26, 2017 SCHWARZBECK Pre-Amplifier EMC12630SE 980385 Feb. 02, 2017 Feb. 01, 2018 EMCI EMC104-SM-SM-1200 160923 Feb. 02, 2017 Feb. 01, 2018 RF Cable EMC104-SM-SM-2000 150318 Mar. 29, 2017 Mar. 28, 2018 EMC104-SM-SM-5000 150321 Mar. 29, 2017 Mar. 28, 2018 Pre-Amplifier EMC184045SE 980387 Feb. 02, 2017 Feb. 01, 2018 EMCI Horn_Antenna BBHA 9170 BBHA9170608 Dec. 15, 2016 Dec. 14, 2017 SCHWARZBECK 36432/2 RF Cable SUCOFLEX 102 Jan. 15, 2017 Jan. 14, 2018 36433/2 Software ADT_Radiated_V8.7.08 NA NA NA Antenna Tower & Turn Table MF-7802 MF780208410 NA NA Max-Full Boresight Antenna Fixture FBA-01 FBA-SIP02 NA NA Spectrum Analyzer E4446A MY48250253 Dec. 21, 2016 Dec. 20, 2017 Agilent Power meter ML2495A 1014008 May 11, 2017 May 10, 2018 Anritsu Power sensor MA2411B 0917122 May 11, 2017 May 10, 2018 Anritsu Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. *The calibration interval of the above test instruments is 24 months and the calibrations are traceable to NML/ROC and NIST/USA. 3. The test was performed in 966 Chamber No. 4. 4. The FCC Designation Number is TW2022. 5. The CANADA Site Registration No. is 20331-2 6. Tested Date: Nov. 01 to 06, 2017 Report No.: RF170908C01A-3 Page No. 16 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Both X and Y axes of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF170908C01A-3 Page No. 17 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF170908C01A-3 Page No. 18 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Connected the EUT with the Laptop. b. Controlling software (QRCT_Version3.0.268.0) has been activated to set the EUT on specific status. Report No.: RF170908C01A-3 Page No. 19 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

4.1.7 Test Results LE 1M Above 1GHz Data: CHANNEL TX Channel 0 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 55.1 PK 74.0 -18.9 1.18 H 180 56.4 -1.3 2 2390.00 43.1 AV 54.0 -10.9 1.18 H 180 44.4 -1.3 3 *2402.00 97.9 PK 1.18 H 180 99.0 -1.1 4 *2402.00 96.4 AV 1.18 H 180 97.5 -1.1 5 4804.00 37.4 PK 74.0 -36.6 1.53 H 136 34.2 3.2 6 4804.00 26.4 AV 54.0 -27.6 1.53 H 136 23.2 3.2 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 54.4 PK 74.0 -19.6 1.54 V 265 55.7 -1.3 2 2390.00 43.6 AV 54.0 -10.4 1.54 V 265 44.9 -1.3 3 *2402.00 94.4 PK 1.54 V 265 95.5 -1.1 4 *2402.00 92.2 AV 1.54 V 265 93.3 -1.1 5 4804.00 38.2 PK 74.0 -35.8 1.59 V 198 35.0 3.2 6 4804.00 27.4 AV 54.0 -26.6 1.59 V 198 24.2 3.2 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF170908C01A-3 Page No. 20 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

CHANNEL TX Channel 19 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 97.9 PK 1.12 H 177 99.1 -1.2 2 *2440.00 96.4 AV 1.12 H 177 97.6 -1.2 3 4880.00 37.6 PK 74.0 -36.4 1.53 H 122 34.2 3.4 4 4880.00 26.6 AV 54.0 -27.4 1.53 H 122 23.2 3.4 5 7320.00 46.2 PK 74.0 -27.8 1.64 H 219 36.4 9.8 6 7320.00 33.2 AV 54.0 -20.8 1.64 H 219 23.4 9.8 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 94.1 PK 1.56 V 248 95.3 -1.2 2 *2440.00 92.1 AV 1.56 V 248 93.3 -1.2 3 4880.00 39.1 PK 74.0 -34.9 1.72 V 183 35.7 3.4 4 4880.00 28.0 AV 54.0 -26.0 1.72 V 183 24.6 3.4 5 7320.00 46.0 PK 74.0 -28.0 1.46 V 196 36.2 9.8 6 7320.00 32.5 AV 54.0 -21.5 1.46 V 196 22.7 9.8 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF170908C01A-3 Page No. 21 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

CHANNEL TX Channel 39 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 96.5 PK 1.52 H 118 97.5 -1.0 2 *2480.00 94.6 AV 1.52 H 118 95.6 -1.0 3 2483.50 55.5 PK 74.0 -18.5 1.52 H 118 56.5 -1.0 4 2483.50 43.6 AV 54.0 -10.4 1.52 H 118 44.6 -1.0 5 4960.00 37.8 PK 74.0 -36.2 1.54 H 133 34.2 3.6 6 4960.00 26.6 AV 54.0 -27.4 1.54 H 133 23.0 3.6 7 7440.00 45.1 PK 74.0 -28.9 1.58 H 237 35.0 10.1 8 7440.00 32.1 AV 54.0 -21.9 1.58 H 237 22.0 10.1 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 92.8 PK 1.58 V 267 93.8 -1.0 2 *2480.00 90.6 AV 1.58 V 267 91.6 -1.0 3 2483.50 54.7 PK 74.0 -19.3 1.58 V 267 55.7 -1.0 4 2483.50 43.3 AV 54.0 -10.7 1.58 V 267 44.3 -1.0 5 4960.00 38.9 PK 74.0 -35.1 1.69 V 194 35.3 3.6 6 4960.00 28.0 AV 54.0 -26.0 1.69 V 194 24.4 3.6 7 7440.00 45.8 PK 74.0 -28.2 1.49 V 197 35.7 10.1 8 7440.00 32.5 AV 54.0 -21.5 1.49 V 197 22.4 10.1 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF170908C01A-3 Page No. 22 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

Below 1GHz Data: CHANNEL TX Channel 0 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 59.08 18.8 QP 40.0 -21.2 1.50 H 356 27.2 -8.4 2 164.64 22.5 QP 43.5 -21.0 1.00 H 332 30.5 -8.0 3 237.99 28.1 QP 46.0 -17.9 1.00 H 299 38.1 -10.0 4 305.65 25.1 QP 46.0 -20.9 1.50 H 277 32.6 -7.5 5 352.57 25.6 QP 46.0 -20.4 2.00 H 95 32.1 -6.5 6 720.54 33.8 QP 46.0 -12.2 1.00 H 307 32.7 1.1 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 30.10 24.2 QP 40.0 -15.8 1.00 V 272 33.7 -9.5 2 78.16 23.7 QP 40.0 -16.3 1.50 V 272 36.2 -12.5 3 138.81 21.0 QP 43.5 -22.5 2.00 V 197 29.3 -8.3 4 191.04 19.7 QP 43.5 -23.8 1.00 V 251 30.7 -11.0 5 393.90 22.3 QP 46.0 -23.7 1.00 V 340 27.8 -5.5 6 718.17 30.4 QP 46.0 -15.6 1.50 V 324 29.3 1.1 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF170908C01A-3 Page No. 23 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

LE 2M ( BT 5.0 ) Below 1GHz Data: CHANNEL TX Channel 39 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 44.62 19.6 QP 40.0 -20.4 2.00 H 293 27.4 -7.8 2 156.73 22.8 QP 43.5 -20.7 1.00 H 308 30.7 -7.9 3 236.59 27.7 QP 46.0 -18.3 1.50 H 300 37.8 -10.1 4 294.88 27.3 QP 46.0 -18.7 1.50 H 186 35.1 -7.8 5 472.05 25.0 QP 46.0 -21.0 1.00 H 256 28.3 -3.3 6 722.10 34.1 QP 46.0 -11.9 2.00 H 309 33.0 1.1 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 34.63 24.4 QP 40.0 -15.6 1.50 V 360 33.3 -8.9 2 82.02 22.3 QP 40.0 -17.7 1.00 V 230 35.8 -13.5 3 213.72 19.8 QP 43.5 -23.7 1.00 V 185 31.3 -11.5 4 340.01 21.4 QP 46.0 -24.6 2.00 V 321 28.0 -6.6 5 509.28 24.6 QP 46.0 -21.4 1.50 V 319 27.1 -2.5 6 716.35 29.9 QP 46.0 -16.1 2.00 V 179 28.9 1.0 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF170908C01A-3 Page No. 24 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

4.2 Conducted Output Power Measurement 4.2.1 Limits OF Conducted Output Power Measurement For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt (30dBm) 4.2.2 Test Setup EUT Power Sensor Power Meter Attenuator 4.2.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.2.4 Test Procedures A peak / average power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak / average power sensor. Record the power level. 4.2.5 Deviation from Test Standard No deviation. 4.2.6 EUT Operating Conditions Same as Item 4.3.6. Report No.: RF170908C01A-3 Page No. 25 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

4.2.7 Test Results LE 1M FOR PEAK POWER Peak Power Peak Power Channel Frequency (MHz) Limit (dBm) Pass/Fail (mW) (dBm) 0 2402 1.355 1.32 30 Pass 19 2440 1.138 0.56 30 Pass 39 2480 1.169 0.68 30 Pass FOR AVERAGE POWER - reference only Frequency Average Power Average Power Channel (MHz) (mW) (dBm) 0 2402 1.282 1.08 19 2440 1.076 0.32 39 2480 1.107 0.44 LE 2M ( BT 5.0 ) FOR PEAK POWER Peak Power Peak Power Channel Frequency (MHz) Limit (dBm) Pass/Fail (mW) (dBm) 0 2402 1.117 0.48 30 Pass 19 2440 1.153 0.62 30 Pass 39 2480 1.199 0.79 30 Pass FOR AVERAGE POWER - reference only Frequency Average Power Average Power Channel (MHz) (mW) (dBm) 0 2402 1.035 0.15 19 2440 1.062 0.26 39 2480 1.099 0.41 Report No.: RF170908C01A-3 Page No. 26 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF170908C01A-3 Page No. 27 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF170908C01A-3 Page No. 28 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22


Document Created: 2017-12-12 09:45:29
Document Modified: 2017-12-12 09:45:29
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC