RF Test Report-WLAN

FCC ID: HD5-CT60L0N

Test Report

Download: PDF
FCCID_3685153

FCC Test Report Report No.: RF170908C01A FCC ID: HD5-CT60L0N Test Model: CT60L0N Received Date: Oct. 30, 2017 Test Date: Nov. 01 to 03, 2017 Issued Date: Nov. 15, 2017 Applicant: Honeywell International Inc. Address: 9680 Old Bailes Road, Fort Mill, SC 29707 USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location : E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF170908C01A Page No. 1 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

Table of Contents Release Control Record .................................................................................................................................. 3 1 Certificate of Conformity ...................................................................................................................... 4 2 Summary of Test Results ..................................................................................................................... 5 2.1 Measurement Uncertainty ................................................................................................................... 5 2.2 Modification Record ............................................................................................................................ 5 3 General Information .............................................................................................................................. 6 3.1 General Description of EUT (WLAN) .................................................................................................. 6 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal .................................................................................................................. 12 3.4 Description of Support Units ............................................................................................................. 13 3.4.1 Configuration of System under Test .................................................................................................. 13 3.5 General Description of Applied Standards ........................................................................................ 14 4 Test Types and Results ...................................................................................................................... 15 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 15 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 15 4.1.2 Test Instruments ................................................................................................................................ 16 4.1.3 Test Procedures ................................................................................................................................. 17 4.1.4 Deviation from Test Standard ............................................................................................................ 17 4.1.5 Test Setup .......................................................................................................................................... 18 4.1.6 EUT Operating Conditions................................................................................................................. 19 4.1.7 Test Results ....................................................................................................................................... 20 4.2 Conducted Output Power Measurement ........................................................................................... 24 4.2.1 Limits of Conducted Output Power Measurement ............................................................................ 24 4.2.2 Test Setup .......................................................................................................................................... 24 4.2.3 Test Instruments ................................................................................................................................ 24 4.2.4 Test Procedures ................................................................................................................................. 24 4.2.5 Deviation from Test Standard ............................................................................................................ 24 4.2.6 EUT Operating Conditions................................................................................................................. 24 4.2.7 Test Results ....................................................................................................................................... 25 5 Pictures of Test Arrangements .......................................................................................................... 27 Appendix – Information on the Testing Laboratories ................................................................................ 28 Report No.: RF170908C01A Page No. 2 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

Release Control Record Issue No. Description Date Issued RF170908C01A Original release. Nov. 15, 2017 Report No.: RF170908C01A Page No. 3 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

1 Certificate of Conformity Product: Dolphin CT60 Brand: Honeywell Test Model: CT60L0N Sample Status: ENGINEERING SAMPLE Applicant: Honeywell International Inc. Test Date: Nov. 01 to 03, 2017 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Nov. 15, 2017 Claire Kuan / Specialist Approved by : , Date: Nov. 15, 2017 May Chen / Manager Report No.: RF170908C01A Page No. 4 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

Eooert venitas 2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (Section 15.247) FCC Test Item Result Remarks Clause 15.205 / ; Radiated leai Emissions and Band Edge Meet the requirement of limit. 15.209 / Measurement 9 PASS Minimum passing margin is —3.2dB at 15.247(d) 4874.00MHz 15.247(b) Conducted power PASS Meet the requirement of limit. Note: This report is supplementary report. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16—4—2: Measurement Frequency Expand(ESQl)Jr(];? Py Radiated Emissions up to 1 GHz 30MHz ~ 1GHz 5.30 dB 1GHz ~ 6GHz 5.16 dB Radiated Emissions above 1 GHz 6GHz ~ 18GHz 4.91 dB 18GHz ~ 40GHz 5.30 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF170908C01A Page No. 5/ 28 Report Format Version: 6.1.1 Reference No.: 171030022

Eooert venitas 3 General Information 3.1 General Description of EUT (WLAN) Product Dolphin CT60 Brand Honeywell Test Model CT6OLON Status of EUT ENGINEERING SAMPLE HW Version V1.0 SW Version 249D HW P/N DVT2.2 3.6Vdc from battery Power Supply Rating 5Vdc from USB interlace CCK, DQPSK, DBPSK for DSSS Modulation Type 64QAM, 16QAM, QPSK, BPSK for OFDM 256QAM for OFDM in 11ac mode only Modulation Technology DSSS,OFDM 802.11b: up to 11Mbps 802.11a/g: up to 54Mbps Transfer Rate 802.11n: up to 150Mbps 802.11ac: up to 433.3Mbps 24GHz: 2.412 ~ 2.462GHz Operating Frequency 5GHz: 5.18 ~ 5.24GHz, 5.26 ~ 5.32GHz, 5.50 ~ 5.72GHz, 5.745 ~ 5.825GHz 24GHz: 802.11b, 802.11g, 802.11n (HT20): 11 5GHz: Number of Channel 802.11a, 802.11n (HT20), 802. 11 ac (VHT20): 25 802.11n (HT40), 802. 11ac (VHTA40): 12 802.11ac (VHT80): 6 2.4GHz: 328.095mW 5GHz: 5.18 ~ 5.24GHz: 34.514mW Output Power 5.26 ~ 5.32GHz: 35.975mW 5.50 ~ 5.72GHz: 36.813mW 5.745 ~ 5.825GHz: 36.983mW Antenna Type Refer to Note Antenna Connector Refer to Note Accessory Device Battery x 1 Data Cable Supplied USB snap—on adapter x 1 (1.25m, Shielded with two cores) Report No.: RF170908C01A Page No. 6 / 28 Report Format Version: 6.1.1 Reference No.: 171030022

Note: 1. This report is prepared for FCC Class II change. The difference compared with the Report No.: RF170908C01 design is as the following:  The change list as below table: BOM Layout No. Change Item Change Change 1.U2101 SIM_SWIO_1 connect to SIM1 J1301 1 2.U2101 SIM_SWIO_2 connect to SIM1 J1303 Yes Yes 3. SIM powers path change Add a pull-up 100K resistor to VREG_L11A_1P8 2 Yes Yes at J1202 pin-34 and connect J1202 pin-35 to GPIO_56 1. Pull-down WIPWR_CHG_OK. 3 2. There is divided voltage 1.8V from VDC_IN by 180K and 100K resistors to Yes Yes QI_PMA_ON 4 Add more vias to mic pads to make the pads hold. No Yes 5 They need to be shifted base on MD's drawing. No Yes Add more vias to the solder pads to make them hold better. 6 No Yes (SW1401~SW1406) 7 Circuit change between J2003 and U2001 Yes Yes Remove U1901 circuit, just keep J1901,L1906(DNI),R1910(0R), 8 Yes Yes E1911(DNI),EMI1901 from original for RF. 1.Remove U1801 circuit,just keep 9 Yes Yes EMI1801,EMI1802,R1813,R1812,L1806,J1801,R1809,R1810,R1811 for RF. 10 AIN1 pin needs to be pulled down No Yes CT50 pad size is 2.0x3.0mm but MD team suggests pad size is 1.5x3.0mm 11 No Yes because receiver spec suggested having 0.5mm gape requirement. 12 Moving camera's test points x 7 pcs to left No Yes 13 Moving U1107 circuit to right for 0.5mm No Yes 14 Add additional vias on the battery connector pads No Yes RF team needs to have NFC circuit changes and matching components value 15 Yes Yes changes. 16 Open a ground pad to contact receiver's back side metal No Yes 17 R401 needs to be changed to 33 Ohm Yes No 18 Put R1219 and R1220 Yes No 19 Change Tool1716 to PTH. No Yes Add 0.5pF to USIM2_DATA_CONN, USIM1_DATA_CONN between system 20 Yes Yes GND,instead to SIM GND 21 Add Ferried Bead and capacitor on Vibrator driving line. Yes Yes 22 Remove R505,C512,C513 Yes Yes 2. According to above conditions, only radiated emissions (Above 1GHz test: only 11b modulation test) and conducted power test item needs to be performed. And all data was verified to meet the requirements. 3. There are WLAN, Bluetooth and NFC technology used for the EUT. Report No.: RF170908C01A Page No. 7 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

4. Simultaneously transmission condition. Condition Technology 1 WLAN 2.4GHz NFC 2 WLAN 5GHz NFC 3 Bluetooth NFC Note: The emission of the simultaneous operation has been evaluated and no non-compliance was found. 5. The EUT needs to be supplied from battery, the information is as below table: Brand Model No. Spec. Inventus CT50-BTSC 3.6Vdc, 4040mAh, 14.6Wh 6. The antennas provided to the EUT, please refer to the following table: WLAN / Bluetooth Antenna Spec. Antenna Gain Frequency rang Antenna No. include path loss Antenna type Connector type (GHz) (dBi) 0.62 2.4~2.4835 1.14 5.15~5.25 1 1.14 5.25~5.35 PIFA UFL 1.14 5.47~5.725 1.14 5.725~5.85 NFC Antenna Spec. Frequency rang Antenna No. Antenna type Connector type (MHz) 1 13~14 Loop NA Note: 1. The antenna has path loss. 2.4GHz: 1dB; 5GHz: 1.7dB 7. The EUT incorporates a SISO function. 2.4GHz Band MODULATION DATA RATE (MCS) TX & RX CONFIGURATION MODE 802.11b 1 ~ 11Mbps 1TX 1RX 802.11g 6 ~ 54Mbps 1TX 1RX 802.11n (HT20) MCS 0~7 1TX 1RX 5GHz Band MODULATION DATA RATE (MCS) TX & RX CONFIGURATION MODE 802.11a 6 ~ 54Mbps 1TX 1RX 802.11n (HT20) MCS 0~7 1TX 1RX 802.11n (HT40) MCS 0~7 1TX 1RX 802.11ac (VHT20) MCS0~8 Nss=1 1TX 1RX 802.11ac (VHT40) MCS0~9 Nss=1 1TX 1RX 802.11ac (VHT80) MCS0~9 Nss=1 1TX 1RX 8. In the original test report, for the radiated emissions, the EUT was pre-tested under the following modes: Test Mode Description Mode A Power from laptop Mode B Power from adapter From the above modes, the worst case was found in Mode A. Therefore only the test data of the mode was recorded in this report. 9. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF170908C01A Page No. 8 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

3.2 Description of Test Modes 11 channels are provided for 802.11b, 802.11g and 802.11n (HT20): Channel Frequency Channel Frequency 1 2412MHz 7 2442MHz 2 2417MHz 8 2447MHz 3 2422MHz 9 2452MHz 4 2427MHz 10 2457MHz 5 2432MHz 11 2462MHz 6 2437MHz Report No.: RF170908C01A Page No. 9 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

3.2.1 Test Mode Applicability and Tested Channel Detail EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE1G RE<1G APCM - √ √ √ Power from Laptop RE1G: Radiated Emission above 1GHz & Where RE<1G: Radiated Emission below 1GHz Bandedge Measurement APCM: Antenna Port Conducted Measurement NOTE: In the oritinal test repot, the EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Z-plane (below 1GHz) & X-plane (Above 1GHz). NOTE: “-”means no effect. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) 802.11b 1 to 11 1, 6, 11 DSSS DBPSK 1 Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) 802.11b 1 to 11 11 DSSS DBPSK 1 Antenna Port Conducted Measurement: This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED MODULATION MODULATION DATA RATE MODE CHANNEL CHANNEL TECHNOLOGY TYPE (Mbps) 802.11b 1 to 11 1, 6, 11 DSSS DBPSK 1 802.11g 1 to 11 1, 6, 11 OFDM BPSK 6 802.11n (HT20) 1 to 11 1, 6, 11 OFDM BPSK 6.5 Report No.: RF170908C01A Page No. 10 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

Test Condition: INPUT POWER APPLICABLE TO ENVIRONMENTAL CONDITIONS TESTED BY (System) RE1G 23deg. C, 71%RH 120Vac, 60Hz Weiwei Lo RE<1G 22deg. C, 63%RH 120Vac, 60Hz Rey Chen APCM 25deg. C, 60%RH 120Vac, 60Hz Anderson Chen Report No.: RF170908C01A Page No. 11 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

3.3 Duty Cycle of Test Signal Duty cycle of test signal is < 98 %, duty factor shall be considered. 802.11b: Duty cycle = 12.224/12.512 = 0.977, Duty factor = 10 * log( 1/0.977) = 0.1 802.11g: Duty cycle = 2.026/2.306 = 0.879, Duty factor = 10 * log( 1/0.879) = 0.56 802.11n (HT20): Duty cycle = 1.882/2.184 = 0.862, Duty factor = 10 * log( 1/0.862) = 0.65 802.11b 802.11g 802.11n (HT20) Report No.: RF170908C01A Page No. 12 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

3.4 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. Laptop HP Pavilion 14-ab023TU 5CD5340WXZ FCC DoC Provided by Lab B. Micro SD Card Transcend 16GB NA NA Provided by Lab Note: 1. All power cords of the above support units are non-shielded (1.8m). Shielding ID Descriptions Qty. Length (m) Cores (Qty.) Remarks (Yes/No) 1. USB Charging Cable 1 1.25 Yes 2 Supplied by client(for RF Setup) Note: The core(s) is(are) originally attached to the cable(s). 3.4.1 Configuration of System under Test Report No.: RF170908C01A Page No. 13 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

3.5 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) KDB 558074 D01 DTS Meas Guidance v04 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. NOTE: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF170908C01A Page No. 14 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power: Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF170908C01A Page No. 15 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

4.1.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY54450088 July 08, 2017 July 07, 2018 Keysight (*) Pre-Amplifier EMC001340 980142 Jan. 20, 2016 Jan. 19, 2018 EMCI (*) Loop Antenna EM-6879 264 Dec. 16, 2016 Dec. 15, 2018 Electro-Metrics LOOPCAB-001 RF Cable NA Jan. 17, 2017 Jan. 16, 2018 LOOPCAB-002 Pre-Amplifier ZFL-1000VH2B AMP-ZFL-01 Nov. 10, 2016 Nov. 09, 2017 Mini-Circuits Trilog Broadband Antenna VULB 9168 9168-406 Dec. 13, 2016 Dec. 12, 2017 SCHWARZBECK 966-4-1 RF Cable 8D 966-4-2 Apr. 01, 2017 Mar. 31, 2018 966-4-3 Fixed attenuator UNAT-5+ PAD-3m-4-01 Oct. 03, 2017 Oct. 02, 2018 Mini-Circuits Horn_Antenna BBHA 9120D 9120D-783 Dec. 27, 2016 Dec. 26, 2017 SCHWARZBECK Pre-Amplifier EMC12630SE 980385 Feb. 02, 2017 Feb. 01, 2018 EMCI EMC104-SM-SM-1200 160923 Feb. 02, 2017 Feb. 01, 2018 RF Cable EMC104-SM-SM-2000 150318 Mar. 29, 2017 Mar. 28, 2018 EMC104-SM-SM-5000 150321 Mar. 29, 2017 Mar. 28, 2018 Pre-Amplifier EMC184045SE 980387 Feb. 02, 2017 Feb. 01, 2018 EMCI Horn_Antenna BBHA 9170 BBHA9170608 Dec. 15, 2016 Dec. 14, 2017 SCHWARZBECK 36432/2 RF Cable SUCOFLEX 102 Jan. 15, 2017 Jan. 14, 2018 36433/2 Software ADT_Radiated_V8.7.08 NA NA NA Antenna Tower & Turn Table MF-7802 MF780208410 NA NA Max-Full Boresight Antenna Fixture FBA-01 FBA-SIP02 NA NA Spectrum Analyzer E4446A MY48250253 Dec. 21, 2016 Dec. 20, 2017 Agilent Power meter ML2495A 1014008 May 11, 2017 May 10, 2018 Anritsu Power sensor MA2411B 0917122 May 11, 2017 May 10, 2018 Anritsu Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. *The calibration interval of the above test instruments is 24 months and the calibrations are traceable to NML/ROC and NIST/USA. 3. The test was performed in 966 Chamber No. 4. 4. The FCC Designation Number is TW2022. 5. The CANADA Site Registration No. is 20331-2 6. Tested Date: Nov. 01 to 03, 2017 Report No.: RF170908C01A Page No. 16 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Both X and Y axes of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF170908C01A Page No. 17 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF170908C01A Page No. 18 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Connected the EUT with the Laptop. b. Controlling software (QRCT_Version3.0.268.0) has been activated to set the EUT on specific status. Report No.: RF170908C01A Page No. 19 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

4.1.7 Test Results Above 1GHz Data: 802.11b CHANNEL TX Channel 1 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 52.2 PK 74.0 -21.8 1.29 H 91 53.5 -1.3 2 2390.00 39.8 AV 54.0 -14.2 1.29 H 91 41.1 -1.3 3 *2412.00 100.0 PK 1.29 H 91 101.1 -1.1 4 *2412.00 97.0 AV 1.29 H 91 98.1 -1.1 5 4824.00 46.6 PK 74.0 -27.4 1.24 H 150 43.4 3.2 6 4824.00 44.6 AV 54.0 -9.4 1.24 H 150 41.4 3.2 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 52.3 PK 74.0 -21.7 2.50 V 157 53.6 -1.3 2 2390.00 40.3 AV 54.0 -13.7 2.50 V 157 41.6 -1.3 3 *2412.00 104.2 PK 2.50 V 157 105.3 -1.1 4 *2412.00 101.6 AV 2.50 V 157 102.7 -1.1 5 4824.00 52.6 PK 74.0 -21.4 1.02 V 210 49.4 3.2 6 4824.00 50.7 AV 54.0 -3.3 1.02 V 210 47.5 3.2 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF170908C01A Page No. 20 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

CHANNEL TX Channel 6 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2437.00 100.7 PK 1.29 H 82 101.9 -1.2 2 *2437.00 100.1 AV 1.29 H 82 101.3 -1.2 3 4874.00 46.2 PK 74.0 -27.8 1.36 H 83 42.9 3.3 4 4874.00 42.9 AV 54.0 -11.1 1.36 H 83 39.6 3.3 5 7311.00 41.6 PK 74.0 -32.4 1.55 H 352 31.8 9.8 6 7311.00 30.0 AV 54.0 -24.0 1.55 H 352 20.2 9.8 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2437.00 103.9 PK 2.51 V 151 105.1 -1.2 2 *2437.00 101.5 AV 2.51 V 151 102.7 -1.2 3 4874.00 52.5 PK 74.0 -21.5 1.04 V 265 49.2 3.3 4 4874.00 50.8 AV 54.0 -3.2 1.04 V 265 47.5 3.3 5 7311.00 43.2 PK 74.0 -30.8 1.50 V 199 33.4 9.8 6 7311.00 32.3 AV 54.0 -21.7 1.50 V 199 22.5 9.8 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF170908C01A Page No. 21 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

CHANNEL TX Channel 11 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2462.00 98.6 PK 1.26 H 95 99.7 -1.1 2 *2462.00 95.8 AV 1.26 H 95 96.9 -1.1 3 2483.50 51.8 PK 74.0 -22.2 1.26 H 95 52.8 -1.0 4 2483.50 39.2 AV 54.0 -14.8 1.26 H 95 40.2 -1.0 5 4924.00 44.9 PK 74.0 -29.1 1.04 H 149 41.4 3.5 6 4924.00 41.5 AV 54.0 -12.5 1.04 H 149 38.0 3.5 7 7386.00 41.9 PK 74.0 -32.1 1.55 H 100 32.0 9.9 8 7386.00 29.5 AV 54.0 -24.5 1.55 H 100 19.6 9.9 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2462.00 102.6 PK 2.51 V 164 103.7 -1.1 2 *2462.00 100.2 AV 2.51 V 164 101.3 -1.1 3 2483.50 53.2 PK 74.0 -20.8 2.51 V 164 54.2 -1.0 4 2483.50 40.7 AV 54.0 -13.3 2.51 V 164 41.7 -1.0 5 4924.00 52.7 PK 74.0 -21.3 1.02 V 265 49.2 3.5 6 4924.00 50.7 AV 54.0 -3.3 1.02 V 265 47.2 3.5 7 7386.00 42.3 PK 74.0 -31.7 1.60 V 321 32.4 9.9 8 7386.00 29.7 AV 54.0 -24.3 1.60 V 321 19.8 9.9 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF170908C01A Page No. 22 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

Below 1GHz Data: 802.11b CHANNEL TX Channel 11 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 46.66 18.7 QP 40.0 -21.3 1.50 H 357 26.7 -8.0 2 158.38 22.6 QP 43.5 -20.9 1.00 H 310 30.3 -7.7 3 241.68 27.9 QP 46.0 -18.1 2.00 H 303 37.7 -9.8 4 293.43 26.4 QP 46.0 -19.6 1.00 H 191 34.2 -7.8 5 377.67 24.1 QP 46.0 -21.9 1.00 H 171 29.8 -5.7 6 719.72 33.6 QP 46.0 -12.4 2.50 H 308 32.5 1.1 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 38.63 24.3 QP 40.0 -15.7 1.50 V 297 32.7 -8.4 2 78.38 21.8 QP 40.0 -18.2 1.00 V 360 34.4 -12.6 3 126.39 20.0 QP 43.5 -23.5 2.00 V 253 29.5 -9.5 4 215.54 19.2 QP 43.5 -24.3 1.00 V 172 30.7 -11.5 5 418.82 22.8 QP 46.0 -23.2 1.00 V 360 27.4 -4.6 6 717.32 29.9 QP 46.0 -16.1 2.00 V 324 28.8 1.1 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF170908C01A Page No. 23 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

4.2 Conducted Output Power Measurement 4.2.1 Limits of Conducted Output Power Measurement For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt (30dBm) 4.2.2 Test Setup EUT Power Sensor Power Meter Attenuator 4.2.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.2.4 Test Procedures A peak / average power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak / average power sensor. Record the power level. 4.2.5 Deviation from Test Standard No deviation. 4.2.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF170908C01A Page No. 24 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

4.2.7 Test Results FOR PEAK POWER 802.11b Channel Frequency (MHz) Peak Power (mW) Peak Power (dBm) Limit (dBm) Pass/Fail 1 2412 328.095 25.16 30 Pass 6 2437 317.687 25.02 30 Pass 11 2462 323.594 25.10 30 Pass 802.11g Channel Frequency (MHz) Peak Power (mW) Peak Power (dBm) Limit (dBm) Pass/Fail 1 2412 181.134 22.58 30 Pass 6 2437 207.014 23.16 30 Pass 11 2462 189.671 22.78 30 Pass 802.11n (HT20) Channel Frequency (MHz) Peak Power (mW) Peak Power (dBm) Limit (dBm) Pass/Fail 1 2412 168.267 22.26 30 Pass 6 2437 208.449 23.19 30 Pass 11 2462 159.221 22.02 30 Pass Report No.: RF170908C01A Page No. 25 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

FOR AVERAGE POWER - reference only 802.11b Average Power Average Power Channel Frequency (MHz) (mW) (dBm) 1 2412 67.764 18.31 6 2437 65.766 18.18 11 2462 66.374 18.22 802.11g Average Power Average Power Channel Frequency (MHz) (mW) (dBm) 1 2412 29.785 14.74 6 2437 34.041 15.32 11 2462 30.549 14.85 802.11n (HT20) Average Power Average Power Channel Frequency (MHz) (mW) (dBm) 1 2412 29.992 14.77 6 2437 36.141 15.58 11 2462 24.491 13.89 Report No.: RF170908C01A Page No. 26 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF170908C01A Page No. 27 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF170908C01A Page No. 28 / 28 Report Format Version: 6.1.1 Reference No.: 171030C22


Document Created: 2017-11-15 13:14:18
Document Modified: 2017-11-15 13:14:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC