User manual

FCC ID: HD5-CT40L1N

Users Manual

Download: PDF
FCCID_4074066

TM Dolphin CT40 Model : CT40-L0N/CT40-L1N CT40-A7-EN-QS Rev(a) 02/18

Dolphin CT40 mobile computer(Model CT40-L0N or CT40-L1N) CT40-L0N model do not include a WWAN radio.

Receiver nd 2 Microphone Scan Notification LED Scan Button Scan Button Touch Panel Scan Button st 1 Microphone

Imager (LED/Laser Aperture) Laser Safety Camera Lens Label Location Battery Latch SIM Card Door MicroSD Card Door I/O Connector Battery


The CT40 mobile computer ships with a Li-ion 3.6 VDC,

The CT40 mobile computer ships with a partially charged battery. Charge the battery with a CT40 Series charging device CT40 mobile computer are designed for use with the following charging accessories: Home base,Ethernet Home base,

To turn the computer on: * Press and release the Power button. To turn the computer off: 1. Press and hold the Power button until the options menu appears. 2. Touch Power Off. 3. When prompted to shut down the computer, touch OK. Note: Note: You should always power off the computer before removing the battery. Sleep mode automatically turns the touch panel display off and locksthe computer to save battery power when the computer is inactive for a programmed period of time. 1. Press and release the Power button to wake the computer. 2. Drag the fi toward the top of the display to unlock the computer. To adjust the amount of time before the display sleeps after inactivity: 1. Touch A >Settings > Display > Sleep. 2. Select the amount of time before the display goes to sleep. 3. Touch O to return to the Home screen.

Navigation Buttons

Scan Touch Scan ICON to trigger the scanner.

Note: For optimum performance, avoid reflections by scanning the bar code ata slight angle. 1. Touch A > Demos > Scan Demo. 2. Point the computer atthe bar code. 3. Touch Sean on the touch screen or press and hold a Scan button. Center the aiming beam over the bar code. The decode results appear on the screen. Note: In the Scan Demo app, not all bar code symbologies are enabled by default ifa bar code does not scan, the correct symbologymay not be enabled, To leam how to modify the default app settings, see the user guide. 11

To move files between your CT40 and a computer: Connect the CT40 to your computer using a USB charge/ By default, the CT40 is in USB charging only mode. To Under “Computer” or “This PC”, click on the CT40. You can computer and CT40 or a microSD card installed in the CT40





Document Created: 2019-05-14 14:47:18
Document Modified: 2019-05-14 14:47:18
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC