Test report CDMA

FCC ID: HD5-CT40L1N

Test Report

Download: PDF
FCCID_4073588

FCC RF Test Report Report No. : FW850409A FCC RF Test Report APPLICANT : Honeywell International Inc. EQUIPMENT : DOLPHIN CT40 BRAND NAME Honeywell MODEL NAME : CT40-L1N FCC ID : HD5-CT40L1N STANDARD : FCC 47 CFR Part 2, and 90(S) CLASSIFICATION : PCS Licensed Transmitter Held to Ear (PCE) The product was received on May 04, 2018 and testing was completed on Oct. 31, 2018. We, Sporton International (Kunshan) Inc., would like to declare that the tested sample has been evaluated in accordance with the procedures given in ANSI/TIA-603-E and shown compliance with the applicable technical standards. The test results in this report apply exclusively to the tested model / sample. Without written approval of Sporton International (Kunshan) Inc., the test report shall not be reproduced except in full. Approved by: James Huang / Manager Sporton International (Kunshan) Inc. No. 1098, Pengxi North Road, Kunshan Economic Development Zone, Jiangsu Province 215335, China Sporton International (Kunshan) Inc. Page Number : 1 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A TABLE OF CONTENTS REVISION HISTORY.......................................................................................................................................... 3 SUMMARY OF TEST RESULT ......................................................................................................................... 4 1 GENERAL DESCRIPTION .......................................................................................................................... 5 1.1. Applicant ............................................................................................................................................ 5 1.2. Manufacturer ..................................................................................................................................... 5 1.3. Feature of Equipment Under Test ..................................................................................................... 5 1.4. Product Specification of Equipment Under Test ............................................................................... 6 1.5. Modification of EUT ........................................................................................................................... 6 1.6. Maximum Frequency Tolerance, Emission Designator and Conducted Power ................................ 6 1.7. Testing Site........................................................................................................................................ 7 1.8. Applied Standards ............................................................................................................................. 7 2 TEST CONFIGURATION OF EQUIPMENT UNDER TEST ........................................................................ 8 2.1 Test Mode.......................................................................................................................................... 8 2.2 Connection Diagram of Test System ................................................................................................ 8 2.3 Support Unit used in test configuration and system .......................................................................... 9 2.4 Measurement Results Explanation Example .................................................................................... 9 2.5 Frequency List of Low/Middle/High Channels ................................................................................... 9 3 TEST RESULT ........................................................................................................................................... 10 3.1 Conducted Output Power Measurement ......................................................................................... 10 3.2 99% Occupied Bandwidth and 26dB Bandwidth Measurement...................................................... 11 3.3 Emissions Mask Measurement ....................................................................................................... 12 3.4 Emissions Mask – Out Of Band Emissions Measurement .............................................................. 14 3.5 Field Strength of Spurious Radiation Measurement ....................................................................... 16 3.6 Frequency Stability Measurement ................................................................................................... 18 4 LIST OF MEASURING EQUIPMENT ........................................................................................................ 20 5 UNCERTAINTY OF EVALUATION ........................................................................................................... 21 APPENDIX A. TEST RESULTS OF CONDUCTED TEST APPENDIX B. TEST RESULTS OF RADIATED TEST APPENDIX C. SETUP PHOTOGRAPHS Sporton International (Kunshan) Inc. Page Number : 2 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A REVISION HISTORY REPORT NO. VERSION DESCRIPTION ISSUED DATE FW850409A Rev. 01 Initial issue of report Nov. 13, 2018 Sporton International (Kunshan) Inc. Page Number : 3 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A SUMMARY OF TEST RESULT Report FCC Rule Description Limit Result Remark Section 3.1 §2.1046 Conducted Output Power Reporting only PASS - §2.1049 99% Occupied Bandwidth 3.2 Reporting only PASS - §90.209 and 26dB Bandwidth §2.1051 Emission masks – 3.3 < 50+10log10(P[Watts]) PASS - §90.691 In-band emissions §2.1051 Emission masks – 3.4 < 43+10log10(P[Watts]) PASS - §90.691 Out of band emissions Under limit §2.1053 Field Strength of Spurious 3.5 < 43+10log10(P[Watts]) PASS 33.35 dB at §90.691 Radiation 1640.000 MHz §2.1055 Frequency Stability for 3.6 < 2.5 ppm PASS - §90.213 Temperature & Voltage Sporton International (Kunshan) Inc. Page Number : 4 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A 1 General Description 1.1. Applicant Honeywell International Inc. Honeywell Safety and Productivity Solutions 9680 Old Bailes Rd. Fort Mill, SC 29707 United States 1.2. Manufacturer Honeywell International Inc. Honeywell Safety and Productivity Solutions 9680 Old Bailes Rd. Fort Mill, SC 29707 United States 1.3. Feature of Equipment Under Test Product Feature & Specification Equipment DOLPHIN CT40 Brand Name Honeywell Model Name CT40-L1N FCC ID HD5-CT40L1N CDMA/EV-DO/GSM/GPRS/EGPRS/WCDMA/HSPA/DC-HSDP A/ HSPA+(16QAM uplink is not supported)/LTE/NFC WLAN 2.4GHz 802.11b/g/n HT20/ EUT supports Radios application WLAN 5GHz 802.11a/n HT20/HT40/ WLAN 5GHz 802.11ac VHT20/VHT40/VHT80/ Bluetooth BR/ EDR / LE Conducted: 990011960007085 IMEI Code Radiation: 990011960005766 HW Version V1.0 SW Version OS.01.010-HON.01.102 EUT Stage Identical Prototype Note: There are two samples under test, the difference is scanner that from different suppliers, According to the difference, sample 1 is assessed to perform full test. Sporton International (Kunshan) Inc. Page Number : 5 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A 1.4. Product Specification of Equipment Under Test Product Specification subjective to this standard Tx Frequency CDMA2000 BC10 : 817.9 MHz ~ 823.1 MHz Rx Frequency CDMA2000 BC10 : 862.9 MHz ~ 868.1 MHz Maximum Output Power to Antenna CDMA2000 BC10 : 23.83 dBm Antenna Type IFA Antenna CDMA2000 1xRTT : QPSK Type of Modulation CDMA2000 1xEV-DO : QPSK/8PSK 1.5. Modification of EUT No modifications are made to the EUT during all test items. 1.6. Maximum Frequency Tolerance, Emission Designator and Conducted Power Frequency Maximum Type of Emission FCC Rule System Tolerance Conducted Modulation Designator (ppm) power(W) CDMA2000 BC10 Part 90S QPSK 0.0280 ppm 1M27F9W 0.2415 1xRTT Sporton International (Kunshan) Inc. Page Number : 6 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A 1.7. Testing Site Sporton International (Kunshan) Inc. is accredited to ISO 17025 by National Voluntary Laboratory Accreditation Program (NVLAP code: 600155-0). Test Site Sporton International (Kunshan) Inc. No. 1098, Pengxi North Road, Kunshan Economic Development Zone, Jiangsu Province 215335, China Test Site Location TEL : 86-512-57900158 FAX : 86-512-57900958 Sporton Site No. FCC designation No. FCC Test Firm Registration No. Test Site No. TH01-KS CN5013 630927 Test Site Sporton International (Kunshan) Inc. No.3-2 Ping-Xiang Rd, Kunshan Development Zone Kunshan City Jiangsu Province 215335 China Test Site Location TEL : +86-512-57900158 FAX : +86-512-57900958 Sporton Site No. FCC designation No. FCC Test Firm Registration No. Test Site No. 03CH02-KS CN5013 630927 1.8. Applied Standards According to the specifications of the manufacturer, the EUT must comply with the requirements of the following standards:  FCC 47 CFR Part 2, 90(S)  ANSI/TIA-603-E  FCC KDB 971168 D01 Power Meas. License Digital Systems v03r01 Remark: 1. All test items were verified and recorded according to the standards and without any deviation during the test. 2. This EUT has also been tested and complied with the requirements of FCC Part 15, Subpart B, recorded in a separate test report. Sporton International (Kunshan) Inc. Page Number : 7 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A 2 Test Configuration of Equipment Under Test 2.1 Test Mode During all testing, EUT is in link mode with base station emulator at maximum power level. The spurious emission measurements were carried out in semi-anechoic chamber with 3-meter test range, and EUT is rotated on three test planes to find out the worst emission. th Frequency range investigated for radiated emission: 30MHz to 10 harmonic. Test Modes Band Radiated TCs Conducted TCs CDMA2000 BC10  1xRTT Link  1xRTT Link Note: The maximum RF output power levels are RC1 SO55 mode for CDMA2000 BC10 on QPSK Link; only these modes were used for all tests. 2.2 Connection Diagram of Test System System BT AP router Notebook GPS Station Simulator Earphone Power EUT Notebook Source Cradle Earphone iPod WLAN AP Monitor This example is connection diagram of EUT test configurations. . For detail, please refer to test mode configuration and setup photographs for each test item. Sporton International (Kunshan) Inc. Page Number : 8 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A 2.3 Support Unit used in test configuration and system Item Equipment Trade Name Model No. FCC ID Data Cable Power Cord 1. System Simulator R&S CMU 200 N/A N/A Unshielded, 1.8 m 2. DC Power Supply GW INSTEK GPS-3030D N/A N/A Unshielded, 1.8 m 2.4 Measurement Results Explanation Example For all conducted test items: The offset level is set in the spectrum analyzer to compensate the RF cable loss and attenuator factor between EUT conducted output port and spectrum analyzer. With the offset compensation, the spectrum analyzer reading level is exactly the EUT RF output level. Example: The spectrum analyzer offset is derived from RF cable loss and attenuator factor. Offset = RF cable loss + attenuator factor. The following shows an offset computation example with RF cable loss 4.3 dB and a 10dB attenuator. Example : Offset(dB) = RF cable loss(dB) + attenuator factor(dB). = 4.3 + 10 = 14.3 (dB) 2.5 Frequency List of Low/Middle/High Channels Frequency List Band Channel/Frequency(MHz) Lowest Middle Highest CDMA200 Channel 476 580 684 BC10 Frequency 817.9 820.5 823.1 Sporton International (Kunshan) Inc. Page Number : 9 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A 3 Test Result 3.1 Conducted Output Power Measurement 3.1.1 Description of the Conducted Output Power Measurement A base station simulator was used to establish communication with the EUT. Its parameters were set to transmit the maximum power on the EUT. The measured power in the radio frequency on the transmitter output terminals shall be reported. 3.1.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.1.3 Test Procedures 1. The transmitter output port was connected to base station. 2. Set EUT at maximum power through base station. 3. Select lowest, middle, and highest channels for each band and different modulation. 3.1.4 Test Setup 3.1.5 Test Result of Conducted Output Power Please refer to Appendix A. Sporton International (Kunshan) Inc. Page Number : 10 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A 3.2 99% Occupied Bandwidth and 26dB Bandwidth Measurement 3.2.1 Description of (Occupied) Bandwidth Limitations Measurement The 99% occupied bandwidth is the width of a frequency band such that, below the lower and above the upper frequency limits, the mean powers emitted are each equal to a specified percentage 0.5% of the total mean transmitted power. The emission bandwidth is defined as the width of the signal between two points, located at the 2 sides of the carrier frequency, outside of which all emissions are attenuated at least 26 dB below the transmitter power. 3.2.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.2.3 Test Procedures 1. The EUT was connected to Spectrum Analyzer and Base Station via power divider. 2. The 99% and 26 dB occupied bandwidth (BW) of the middle channel for the highest RF powers were measured. 3.2.4 Test Setup 3.2.5 Test Result of 99% Occupied Bandwidth and 26dB Bandwidth Please refer to Appendix A. Sporton International (Kunshan) Inc. Page Number : 11 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A 3.3 Emissions Mask Measurement 3.3.1 Description of Emissions Mask Measurement Equipment used in this licensed to EA or non-EA systems shall comply with the emission mask provisions of FCC Part 90.691.(a): (a) Out-of-band emission requirement shall apply only to the “outer” channels included in an EA license and to spectrum adjacent to interior channels used by incumbent licensees. The emission limits are as follows: (1) For any frequency removed from the EA licensee's frequency block by up to and including 37.5 kHz, the power of any emission shall be attenuated below the transmitter power (P) in watts by at least 116 Log10(f/6.1) decibels or 50 + 10 Log10(P) decibels or 80 decibels, whichever is the lesser attenuation, where f is the frequency removed from the center of the outer channel in the block in kilohertz and where f is greater than 12.5 kHz. (2) For any frequency removed from the EA licensee's frequency block greater than 37.5 kHz, the power of any emission shall be attenuated below the transmitter power (P) in watts by at least 43 + 10Log10(P) decibels or 80 decibels, whichever is the lesser attenuation, where f is the frequency removed from the center of the outer channel in the block in kilohertz and where f is greater than 37.5 kHz. 3.3.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.3.3 Test Procedures 1. The EUT was connected to spectrum analyzer and base station via power divider. 2. The emissions mask of low and high channels for the highest RF powers were measured. 3. The RBW was set 1% of 99% Occupied Bandwidth, and VBW was set 3 times of RBW. 4. The final test results were shown below plots with a correction offset factor including cable loss, insertion loss of power divider. Sporton International (Kunshan) Inc. Page Number : 12 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A 3.3.4 Test Setup 3.3.5 Test Result (Plots) of Conducted Emissions Mask Please refer to Appendix A. Sporton International (Kunshan) Inc. Page Number : 13 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A 3.4 Emissions Mask – Out Of Band Emissions Measurement 3.4.1 Description of Conducted Emissions Out of band emissions measurement The power of any emission FCC Part 90.691 (a)(2) on any frequency removed from the assigned frequency by more than 250 percent of the authorized bandwidth at least 43 + 10 log (P) dB. It is measured by means of th a calibrated spectrum analyzer and scanned from 30MHz up to a frequency including its 10 harmonic. 3.4.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.4.3 Test Procedures 1. The EUT was connected to spectrum analyzer and system simulator via a power divider. 2. The RF output of EUT was connected to the spectrum analyzer by RF cable and attenuator. The path loss was compensated to the results for each measurement. 3. The middle channel for the highest RF power within the transmitting frequency was measured. 4. The conducted spurious emission for the whole frequency range was taken. 5. Make the measurement with the spectrum analyzer's RBW = 1MHz, VBW = 3MHz, taking the record of maximum spurious emission. 6. The RF fundamental frequency should be excluded against the limit line in the operating frequency band. 7. The limit line is derived from 43 + 10log(P)dB below the transmitter power P(Watts) = P(W)- [43 + 10log(P)] (dB) = [30 + 10log(P)] (dBm) - [43 + 10log(P)] (dB) = -13dBm. Sporton International (Kunshan) Inc. Page Number : 14 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A 3.4.4 Test Setup 3.4.5 Test Result (Plots) of Conducted Emission Please refer to Appendix A. Sporton International (Kunshan) Inc. Page Number : 15 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A 3.5 Field Strength of Spurious Radiation Measurement 3.5.1 Description of Field Strength of Spurious Radiated Measurement The radiated spurious emission was measured by substitution method according to ANSI/TIA-603-E. The power of any emission FCC Part 90.691 on any frequency removed from the assigned frequency by more than 250 percent of the authorized bandwidth at least 43 + 10 log (P) dB. The spectrum is scanned from 30 MHz up to a frequency including its 10th harmonic. 3.5.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.5.3 Test Procedures 1. The EUT was placed on a rotatable wooden table 0.8 meters for frequency below 1GHz and 1.5 meter for frequency above 1GHz above the ground. 2. The EUT was set 3 meters from the receiving antenna, which was mounted on the antenna tower. 3. The table was rotated 360 degrees to determine the position of the highest spurious emission. 4. The height of the receiving antenna is varied between one meter and four meters to search the maximum spurious emission for both horizontal and vertical polarizations. 5. Make the measurement with the spectrum analyzer's RBW = 1MHz, VBW = 3MHz, Sweep = 500ms, Taking the record of maximum spurious emission. 6. A horn antenna was substituted in place of the EUT and was driven by a signal generator. 7. Tune the output power of signal generator to the same emission level with EUT maximum spurious emission. 8. Taking the record of output power at antenna port. 9. Repeat step 7 to step 8 for another polarization. 10. EIRP (dBm) = S.G. Power – Tx Cable Loss + Tx Antenna Gain 11. ERP (dBm) = EIRP - 2.15 12. The RF fundamental frequency should be excluded against the limit line in the operating frequency band. 13. The limit line is derived from 43 + 10log(P) dB below the transmitter power P(Watts) = P(W) - [43 + 10log(P)] (dB) = [30 + 10log(P)] (dBm) - [43 + 10log(P)] (dB) = -13dBm. Sporton International (Kunshan) Inc. Page Number : 16 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A 3.5.4 Test Setup 3.5.5 Test Result of Field Strength of Spurious Radiated Please refer to Appendix B. Sporton International (Kunshan) Inc. Page Number : 17 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A 3.6 Frequency Stability Measurement 3.6.1 Description of Frequency Stability Measurement The frequency stability shall be measured by variation of ambient temperature and variation of primary supply voltage to ensure that the fundamental emission stays within the authorized frequency block. The frequency stability of the transmitter shall be maintained within ±0.00025% (±2.5ppm) of the center frequency according to FCC Part 90.213. 3.6.2 Measuring Instruments The measuring equipment is listed in the section 4 of this test report. 3.6.3 Test Procedures for Temperature Variation 1. The EUT was set up in the thermal chamber and connected with the base station. 2. With power OFF, the temperature was decreased to -30°C and the EUT was stabilized for three hours. Power was applied and the maximum change in frequency was recorded within one minute. 3. With power OFF, the temperature was raised in 10°C step up to 50°C. The EUT was stabilized at each step for at least half an hour. Power was applied and the maximum frequency change was recorded within one minute. 3.6.4 Test Procedures for Voltage Variation 1. The EUT was placed in a temperature chamber at 20±5°C and connected with the system simulator. 2. The power supply voltage to the EUT was varied from 85% to 115% of the nominal value for other than hand carried battery equipment. 3. For hand carried, battery powered equipment, reduce the primary ac or dc supply voltage to the battery operating end point, which shall be specified by the manufacturer. 4. The variation in frequency was measured for the worst case. Sporton International (Kunshan) Inc. Page Number : 18 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A 3.6.5 Test Setup 3.6.6 Test Result of Temperature Variation Please refer to Appendix A. Sporton International (Kunshan) Inc. Page Number : 19 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A 4 List of Measuring Equipment Calibration Instrument Manufacturer Model No. Serial No. Characteristics Test Date Due Date Remark Date Spectrum Oct. 30, 2018~ Conducted R&S FSV30 101338 10Hz~30GHz Apr. 19, 2018 Apr. 18, 2019 Analyzer Oct. 31, 2018 (TH01-KS) Thermal -40~+150°C Oct. 30, 2018~ Conducted Hongzhan LP-150U H2014011440 Jun. 27, 2018 Jun. 26, 2019 Chamber 20%~95%RH Oct. 31, 2018 (TH01-KS) EXA Spectrum 10Hz-44G,MAX Radiation Keysight N9010A MY55150208 Apr. 17, 2018 Jun. 17, 2018 Apr. 16, 2019 Analyzer 30dB (03CH02-KS) Radiation Bilog Antenna TeseQ CBL6112D 23182 30MHz-2GHz Jan. 29, 2018 Jun. 17, 2018 Jan. 28, 2019 (03CH02-KS) Double Ridge Radiation ETS-Lindgren 3117 75957 1GHz~18GHz Oct. 21, 2017 Jun. 17, 2018 Oct. 20, 2018 Horn Antenna (03CH02-KS) Radiation Amplifier Burgeon BPA-530 102220 0.01MHz~1GHz Dec. 16, 2017 Jun. 17, 2018 Dec. 15, 2018 (03CH02-KS) high gain AMF-7D-00 Radiation MITEQ 101800-30-1 2025788 100MHz-18GHz Apr. 17, 2018 Jun. 17, 2018 Apr. 16, 2019 (03CH02-KS) Amplifier 0P 1-26.5GHz Gain Radiation Amplifier Agilent 8449B 3008A02384 Oct. 12, 2017 Jun. 17, 2018 Oct. 11, 2018 30dB (03CH02-KS) AC Power Radiation Chroma 61601 616010002473 N/A NCR Jun. 17, 2018 NCR Source (03CH02-KS) Radiation Turn Table MF MF7802 N/A 0~360 degree NCR Jun. 17, 2018 NCR (03CH02-KS) Radiation Antenna Mast MF MF7802 N/A 1 m~4 m NCR Jun. 17, 2018 NCR (03CH02-KS) NCR: No Calibration Required Sporton International (Kunshan) Inc. Page Number : 20 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A 5 Uncertainty of Evaluation Uncertainty of Radiated Emission Measurement (30 MHz ~ 1000 MHz) Measuring Uncertainty for a Level of 3.3 dB Confidence of 95% (U = 2Uc(y)) Uncertainty of Radiated Emission Measurement (1 GHz ~ 18 GHz) Measuring Uncertainty for a Level of 2.8 dB Confidence of 95% (U = 2Uc(y)) Sporton International (Kunshan) Inc. Page Number : 21 of 21 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A Appendix A. Test Results of Conducted Test Conducted Output Power (Average power) Conducted Power (*Unit: dBm) Band CDMA2000 BC10 Channel 476 580 684 Frequency 817.9 820.5 823.1 1xRTT RC1 SO55 23.75 23.83 23.70 1xRTT RC3 SO55 23.73 23.81 23.68 1xRTT RC3 SO32(+ F-SCH) 23.70 23.79 23.65 1xRTT RC3 SO32 (+SCH) 23.68 23.77 23.64 1xEVDO RTAP 153.6Kbps 23.68 23.76 23.63 1xEVDO RETAP 4096Bits 23.65 23.75 23.60 Sporton International (Kunshan) Inc. Page Number : A1 of A8 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A 26dB Bandwidth Mode CDMA BC10(MHz) Mod. 1xRTT Lowest CH 1.429 Middle CH 1.429 Highest CH 1.431 Sporton International (Kunshan) Inc. Page Number : A2 of A8 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A CDMA BC10 (1xRTT) Lowest Channel Middle Channel Highest Channel Sporton International (Kunshan) Inc. Page Number : A3 of A8 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A Occupied Bandwidth Mode CDMA BC10(MHz) Mod. 1xRTT Lowest CH 1.27 Middle CH 1.27 Highest CH 1.27 Sporton International (Kunshan) Inc. Page Number : A4 of A8 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A CDMA BC10 (1xRTT) Lowest Channel Middle Channel Highest Channel Sporton International (Kunshan) Inc. Page Number : A5 of A8 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A Conducted Band Edge CDMA BC10 (1xRTT) Lowest Band Edge Highest Band Edge Sporton International (Kunshan) Inc. Page Number : A6 of A8 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A Conducted Spurious Emission CDMA BC10 (1xRTT) Lowest Channel Middle Channel Highest Channel Sporton International (Kunshan) Inc. Page Number : A7 of A8 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A Frequency Stability CDMA BC10 Limit Test Conditions Middle Channel (1xRTT) 2.5ppm Temperature (°C) Voltage (Volt) Deviation (ppm) Result 50 Normal Voltage 0.0183 40 Normal Voltage 0.0073 30 Normal Voltage 0.0280 20(Ref.) Normal Voltage 0.0000 10 Normal Voltage 0.0024 0 Normal Voltage 0.0049 PASS -10 Normal Voltage 0.0061 -20 Normal Voltage 0.0171 -30 Normal Voltage 0.0085 20 Maximum Voltage 0.0232 20 Normal Voltage 0.0000 20 Battery End Point 0.37 Note: Normal Voltage = 3.8V. ；Battery End Point (BEP) = 3.5V.；Maximum Voltage =4.3V Sporton International (Kunshan) Inc. Page Number : A8 of A8 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0

FCC RF Test Report Report No. : FW850409A Appendix B. Test Results of Radiated Test CDMA BC10 (1xRTT) Over S.G. TX Cable TX Antenna Frequency ERP Limit Polarization Channel Limit Power loss Gain ( MHz ) ( dBm ) ( dBm ) (H/V) ( dB ) ( dBm ) ( dB ) (dBi) 1636 -46.52 -13 -33.52 -47.89 2.28 5.80 H 2454 -55.45 -13 -42.45 -57.36 2.84 6.90 H 3270 -59.17 -13 -46.17 -61.23 3.29 7.50 H Lowest 1636 -52.43 -13 -39.43 -53.80 2.28 5.80 V 2453.7 -59.35 -13 -46.35 -61.26 2.84 6.90 V 3270 -59.30 -13 -46.30 -61.36 3.29 7.50 V 1640 -46.35 -13 -33.35 -47.72 2.28 5.80 H 2462 -55.78 -13 -42.78 -57.69 2.84 6.90 H 3282 -59.58 -13 -46.58 -61.64 3.29 7.50 H Middle 1640 -52.76 -13 -39.76 -54.13 2.28 5.80 V 2524 -58.39 -13 -45.39 -60.30 2.84 6.90 V 3282 -59.31 -13 -46.31 -61.37 3.29 7.50 V 1646 -47.52 -13 -34.52 -48.89 2.28 5.80 H 2470 -56.55 -13 -43.55 -58.46 2.84 6.90 H 3291 -59.85 -13 -46.85 -61.91 3.29 7.50 H Highest 1646 -53.97 -13 -40.97 -55.34 2.28 5.80 V 2469 -59.64 -13 -46.64 -61.55 2.84 6.90 V 3291 -59.90 -13 -46.90 -61.96 3.29 7.50 V Remark: Spurious emissions within 30-1000MHz were found more than 20dB below limit line. Sporton International (Kunshan) Inc. Page Number : B1 of B1 TEL : +86-512-57900158 Report Issued Date : Nov. 13, 2018 FAX : +86-512-57900958 Report Version : Rev. 01 FCC ID : HD5-CT40L1N Report Template No.: BU5-FWCDMA Version 1.0


Document Created: 2019-03-29 16:25:00
Document Modified: 2019-03-29 16:25:00
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC