RF Test Report-Zigbee

FCC ID: HD5-CN80L0N

Test Report

Download: PDF
FCCID_3773316

FCC Test Report (Zigbee) Report No.: RF171130C28-5 FCC ID: HD5-CN80L0N Test Model: CN80L0N Received Date: Dec. 04, 2017 Test Date: Jan. 25, 2018 Issued Date: Feb. 23, 2018 Applicant: Honeywell International Inc. Address: 9680 Old Bailes Road, Fort Mill, SC 29707 USA Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Hsin Chu Laboratory Lab Address: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. Test Location: E-2, No.1, Li Hsin 1st Road, Hsinchu Science Park, Hsinchu City 300, Taiwan R.O.C. FCC Registration / 723255 / TW2022 Designation Number: This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF171130C28-5 Page No. 1 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity ...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT (Zigbee) .................................................................................................. 7 3.2 Description of Test Modes ................................................................................................................... 9 3.2.1 Test Mode Applicability and Tested Channel Detail ........................................................................... 10 3.3 Duty Cycle of Test Signal ................................................................................................................... 11 3.4 Description of Support Units ............................................................................................................. 12 3.4.1 Configuration of System under Test .................................................................................................. 12 3.5 General Description of Applied Standards ........................................................................................ 13 4 Test Types and Results ...................................................................................................................... 14 4.1 Radiated Emission and Bandedge Measurement ............................................................................. 14 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 14 4.1.2 Test Instruments ................................................................................................................................ 15 4.1.3 Test Procedures ................................................................................................................................. 16 4.1.4 Deviation from Test Standard ............................................................................................................ 16 4.1.5 Test Setup .......................................................................................................................................... 17 4.1.6 EUT Operating Conditions................................................................................................................. 18 4.1.7 Test Results ....................................................................................................................................... 19 4.2 6dB Bandwidth Measurement ........................................................................................................... 23 4.2.1 Limits of 6dB Bandwidth Measurement ............................................................................................. 23 4.2.2 Test Setup .......................................................................................................................................... 23 4.2.3 Test Instruments ................................................................................................................................ 23 4.2.4 Test Procedure .................................................................................................................................. 23 4.2.5 Deviation fromTest Standard ............................................................................................................. 23 4.2.6 EUT Operating Conditions................................................................................................................. 23 4.2.7 Test Result ......................................................................................................................................... 24 4.3 Conducted Output Power Measurement ........................................................................................... 25 4.3.1 Limits of Conducted Output Power Measurement ............................................................................ 25 4.3.2 Test Setup .......................................................................................................................................... 25 4.3.3 Test Instruments ................................................................................................................................ 25 4.3.4 Test Procedures ................................................................................................................................. 25 4.3.5 Deviation from Test Standard ............................................................................................................ 25 4.3.6 EUT Operating Conditions................................................................................................................. 25 4.3.7 Test Results ....................................................................................................................................... 26 4.4 Power Spectral Density Measurement .............................................................................................. 27 4.4.1 Limits of Power Spectral Density Measurement ............................................................................... 27 4.4.2 Test Setup .......................................................................................................................................... 27 4.4.3 Test Instruments ................................................................................................................................ 27 4.4.4 Test Procedure .................................................................................................................................. 27 4.4.5 Deviation from Test Standard ............................................................................................................ 27 4.4.6 EUT Operating Condition .................................................................................................................. 27 4.4.7 Test Results ....................................................................................................................................... 28 4.5 Conducted Out of Band Emission Measurement .............................................................................. 29 4.5.1 Limits of Conducted Out of Band Emission Measurement................................................................ 29 4.5.2 Test Setup .......................................................................................................................................... 29 4.5.3 Test Instruments ................................................................................................................................ 29 4.5.4 Test Procedure .................................................................................................................................. 29 4.5.5 Deviation from Test Standard ............................................................................................................ 29 4.5.6 EUT Operating Condition .................................................................................................................. 29 Report No.: RF171130C28-5 Page No. 2 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

4.5.7 Test Results ....................................................................................................................................... 29 5 Pictures of Test Arrangements .......................................................................................................... 31 Appendix – Information on the Testing Laboratories ................................................................................ 32 Report No.: RF171130C28-5 Page No. 3 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

Release Control Record Issue No. Description Date Issued RF171130C28-5 Original release. Feb. 23, 2018 Report No.: RF171130C28-5 Page No. 4 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

1 Certificate of Conformity Product: Dolphin CN80 Brand: Honeywell Test Model: CN80L0N Sample Status: ENGINEERING SAMPLE Applicant: Honeywell International Inc. Test Date: Jan. 25, 2018 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Feb. 23, 2018 Mary Ko / Specialist Approved by : , Date: Feb. 23, 2018 May Chen / Manager Report No.: RF171130C28-5 Page No. 5 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

Eooert venitas 2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (Section 15.247) ECC Test Item Result Remarks Clause 15.207 AC Power Conducted Emission NA Without AC power port of the EUT. 15.205 / al ; E leai d Band Ed Meet the requirement of limit. 15.209 / Mz::[tfi:mg:]ltsswns and san 0e PASS Minimum passing margin is —2.6dB at 15.247(d) 2390.00MHz. 15.247(d) Antenna Port Emission PASS Meet the requirement of limit. 15.247(a)(2) 6dB bandwidth PASS Meet the requirement of limit. 15.247(b) Conducted power PASS Meet the requirement of limit. 15.247(e) Power Spectral Density PASS Meet the requirement of limit. . Antenna connector is POGO pin not a 15.203 Antenna Requirement PASS standard connector. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16—4—2: Measurement Frequency Expantj(figzl;?fsna|nty Radiated Emissions up to 1 GHz 30MHz ~ 1GHz 5.53 dB 1GHz ~ 6GHz 5.08 dB Radiated Emissions above 1 GHz 6GHz ~ 18GHz 4.98 dB 18GHz ~ 40GHz 5.19 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF171130028—5 Page No. 6 / 32 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT (Zigbee) Product Dolphin CN80 Brand Honeywell Test Model CN80L0N Status of EUT ENGINEERING SAMPLE HW Version Rev 1.1 HW P/N DVT1 SW Version 351D SW P/N 351D Power Supply Rating 3.85Vdc from battery Modulation Type O-QPSK Modulation Technology DSSS Transfer Rate 250kbps Operating Frequency 2405 ~ 2480MHz Number of Channel 16 Output Power 1.963mW Antenna Type Refer to Note Antenna Connector Refer to Note Battery x 1 Accessory Device Touch pen x 1 Data Cable Supplied NA Note: 1. All Scanners are listed as below. Item Model Difference 20.53 mm (L) x 7.8 mm (W) x 3.97 mm (H) (8.08 in x 3.07 in x 1.56 in) EX20 Weight: 500 grams (17.6 oz) with battery pack Scanner 20.4 mm (L) x 7.8 mm (W) x 3.32 mm (H (8.03 in x 3.07 in x 1.31 in) N6603ER Weight: 550 grams (19.4 oz) with battery pack * All scanners are appearance and size different. 2. There are WLAN, Bluetooth, Zigbee and NFC technology used for the EUT. The EUT has three radios as following table: Radio 1 Radio 2 Radio 3 WLAN+BT 1 Zigbee+BT 2 NFC Note: For Bluetooth technology the Radio 1 support BT 5.0 dual mode, the Radio 2 support BT-LE (4.2) single mode only 3. There’re 4 configurations for the EUT listed as below. Sample A: Short K/B-number + Scanner (EX20) Sample B: Short K/B-Qwety + Scanner (EX20) Sample C: Short K/B-number + Scanner (N6603ER) Sample D: Short K/B-Qwenty + Scanner (N6603ER) From the above samples, the worst cases were found in Sample C. Therefore only the test data of the mode was recorded in this report. Report No.: RF171130C28-5 Page No. 7 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

4. Simultaneously transmission condition. Condition Technology 1 WLAN 2.4GHz NFC Zigbee 2 WLAN 5GHz NFC Zigbee 3 Bluetooth NFC Zigbee Note: The emission of the simultaneous operation has been evaluated and no non-compliance was found. 5. The EUT needs to be supplied from battery, the information is as below table: Brand Model No. Spec. Inventus Power, Inc. / CW-BAT 3.85Vdc, 5800mAh, 22.3Wh Honeywell 6. The antennas provided to the EUT, please refer to the following table: Radio 1 WLAN Antenna Spec. / Bluetooth Antenna No. 1 Spec. Antenna Gain Trace loss and include trace loss Frequency range Chain No. Antenna type Connector type cable loss and cable loss (GHz) (dB) (dBi) -0.38 2.4~2.4835 1.6 -0.39 5.15~5.25 Chain 0 -0.39 5.25~5.35 PIFA POGO pin 3 -0.39 5.47~5.725 -0.39 5.725~5.85 3.36 2.4~2.4835 0.6 3.46 5.15~5.25 Chain 1 3.46 5.25~5.35 PIFA POGO pin 1.2 3.46 5.47~5.725 3.46 5.725~5.85 Radio 2 Bluetooth Antenna No. 2 Spec. / Zigbee Antenna Spec. Antenna Gain Frequency range Trace loss include trace loss Antenna type Connector type (GHz) (dB) (dBi) -0.03 2.4~2.4835 PIFA POGO pin 0.8 Radio 3 NFC Antenna Spec. Frequency range Antenna type Connector type (MHz) 13~14 Loop NA 7. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or user's manual. Report No.: RF171130C28-5 Page No. 8 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

3.2 Description of Test Modes 16 channels are provided to the EUT: Channel Frequency Channel Frequency 11 2405 19 2445 12 2410 20 2450 13 2415 21 2455 14 2420 22 2460 15 2425 23 2465 16 2430 24 2470 17 2435 25 2475 18 2440 26 2480 Report No.: RF171130C28-5 Page No. 9 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

3.2.1 Test Mode Applicability and Tested Channel Detail EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE1G RE<1G PLC APCM - √ √ - √ - RE1G: Radiated Emission above 1GHz & Where RE<1G: Radiated Emission below 1GHz Bandedge Measurement PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement NOTE: 1. No need to concern of Conducted Emission due to the EUT is powered by battery. 2. The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on Z-plane (below 1GHz) & X-plane (above 1GHz). Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED CHANNEL MODULATION TYPE DATA RATE (kbps) CHANNEL 11 to 26 11, 18, 26 O-QPSK 250 Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED CHANNEL MODULATION TYPE DATA RATE (kbps) CHANNEL 11 to 26 11 O-QPSK 250 Antenna Port Conducted Measurement: This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. AVAILABLE TESTED CHANNEL MODULATION TYPE DATA RATE (kbps) CHANNEL 11 to 26 11, 18, 26 O-QPSK 250 Test Condition: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY RE1G 23deg. C, 68%RH DC 3.85V Weiwei Lo RE<1G 24deg. C, 68%RH DC 3.85V Weiwei Lo APCM 25deg. C, 60%RH DC 3.85V Anderson Chen Report No.: RF171130C28-5 Page No. 10 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

3.3 Duty Cycle of Test Signal If duty cycle of test signal is < 98%, duty factor shall be considered. Duty cycle = 2.654/3.021 = 0.879 Report No.: RF171130C28-5 Page No. 11 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

3.4 Description of Support Units The EUT has been tested as an independent unit together with other necessary accessories or support units. The following support units or accessories were used to form a representative test configuration during the tests. ID Product Brand Model No. Serial No. FCC ID Remarks A. SIM Card NA NA NA NA Supplied by client B. SD Card NA NA NA NA Supplied by client Note: 1. All power cords of the above support units are non-shielded (1.8m). 3.4.1 Configuration of System under Test Report No.: RF171130C28-5 Page No. 12 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

3.5 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) KDB 558074 D01 DTS Meas Guidance v04 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. NOTE: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF171130C28-5 Page No. 13 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB or below the highest level of the desired power: Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF171130C28-5 Page No. 14 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

4.1.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL Test Receiver N9038A MY54450088 July 08, 2017 July 07, 2018 Keysight (*) Loop Antenna HLA 6121 45745 May 19, 2017 May 18, 2018 TESEQ Pre-Amplifier ZFL-1000VH2B AMP-ZFL-01 Nov. 09, 2017 Nov. 08, 2018 Mini-Circuits Trilog Broadband Antenna VULB 9168 9168-406 Nov. 29, 2017 Nov. 28, 2018 SCHWARZBECK 966-4-1 RF Cable 8D 966-4-2 Apr. 01, 2017 Mar. 31, 2018 966-4-3 Fixed attenuator UNAT-5+ PAD-3m-4-01 Oct. 03, 2017 Oct. 02, 2018 Mini-Circuits Horn_Antenna BBHA 9120D 9120D-783 Dec. 12, 2017 Dec. 11, 2018 SCHWARZBECK Pre-Amplifier EMC12630SE 980385 Feb. 02, 2017 Feb. 01, 2018 EMCI EMC104-SM-SM-1200 160923 Feb. 02, 2017 Feb. 01, 2018 RF Cable EMC104-SM-SM-2000 150318 Mar. 29, 2017 Mar. 28, 2018 EMC104-SM-SM-5000 150321 Mar. 29, 2017 Mar. 28, 2018 Pre-Amplifier EMC184045SE 980387 Feb. 02, 2017 Feb. 01, 2018 EMCI Horn_Antenna BBHA 9170 BBHA9170608 Dec. 14, 2017 Dec. 13, 2018 SCHWARZBECK 36432/2 RF Cable SUCOFLEX 102 Jan. 11, 2018 Jan. 10, 2019 36433/2 Software ADT_Radiated_V8.7.08 NA NA NA Antenna Tower & Turn Table MF-7802 MF780208410 NA NA Max-Full Boresight Antenna Fixture FBA-01 FBA-SIP02 NA NA Spectrum Analyzer FSV40 100964 July 1, 2017 June 30, 2018 R&S Power meter ML2495A 1014008 May 11, 2017 May 10, 2018 Anritsu Power sensor MA2411B 0917122 May 11, 2017 May 10, 2018 Anritsu Note: 1. The calibration interval of the above test instruments is 12 months and the calibrations are traceable to NML/ROC and NIST/USA. 2. *The calibration interval of the above test instruments is 24 months and the calibrations are traceable to NML/ROC and NIST/USA. 3. The test was performed in 966 Chamber No. 3. 4 Loop antenna was used for all emissions below 30 MHz. 5. The CANADA Site Registration No. is 20331-1 6. Tested Date: Jan. 25, 2018 Report No.: RF171130C28-5 Page No. 15 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

4.1.3 Test Procedures For Radiated emission below 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter chamber room. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. Both X and Y axes of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Quasi-Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 9kHz at frequency below 30MHz. For Radiated emission above 30MHz a. The EUT was placed on the top of a rotating table 0.8 meters (for 30MHz ~ 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is ≥ 1/T (Duty cycle < 98%) or 10Hz (Duty cycle ≥ 98%) for Average detection (AV) at frequency above 1GHz. 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF171130C28-5 Page No. 16 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

4.1.5 Test Setup For Radiated emission below 30MHz 1m EUT& 3m Support Units Turn Table 80cm Ground Plane Test Receiver For Radiated emission 30MHz to 1GHz Ant. Tower 1-4m Variable 3m 10m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver Report No.: RF171130C28-5 Page No. 17 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

For Radiated emission above 1GHz Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions a. Placed the EUT on the testing table. b. Contorlling software (QRCT.exe V3.0.268.0) has been activated to set the EUT on specific status. Report No.: RF171130C28-5 Page No. 18 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

4.1.7 Test Results Above 1GHz Data: CHANNEL TX Channel 11 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 63.8 PK 74.0 -10.2 1.28 H 34 65.0 -1.2 2 2390.00 49.6 AV 54.0 -4.4 1.28 H 34 50.8 -1.2 3 *2405.00 93.9 PK 1.28 H 34 95.2 -1.3 4 *2405.00 90.1 AV 1.28 H 34 91.4 -1.3 5 4810.00 39.7 PK 74.0 -34.3 2.87 H 211 36.6 3.1 6 4810.00 31.9 AV 54.0 -22.1 2.87 H 211 28.8 3.1 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 66.0 PK 74.0 -8.0 1.18 V 1 67.2 -1.2 2 2390.00 51.4 AV 54.0 -2.6 1.18 V 1 52.6 -1.2 3 *2405.00 96.3 PK 1.18 V 1 97.6 -1.3 4 *2405.00 92.6 AV 1.18 V 1 93.9 -1.3 5 4810.00 40.6 PK 74.0 -33.4 1.57 V 287 37.5 3.1 6 4810.00 32.2 AV 54.0 -21.8 1.57 V 287 29.1 3.1 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF171130C28-5 Page No. 19 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

CHANNEL TX Channel 18 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 94.1 PK 1.25 H 18 95.7 -1.6 2 *2440.00 90.5 AV 1.25 H 18 92.1 -1.6 3 4880.00 39.3 PK 74.0 -34.7 2.89 H 206 36.0 3.3 4 4880.00 31.4 AV 54.0 -22.6 2.89 H 206 28.1 3.3 5 7320.00 42.3 PK 74.0 -31.7 1.65 H 236 33.4 8.9 6 7320.00 33.7 AV 54.0 -20.3 1.65 H 236 24.8 8.9 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 97.1 PK 1.18 V 9 98.7 -1.6 2 *2440.00 93.3 AV 1.18 V 9 94.9 -1.6 3 4880.00 39.9 PK 74.0 -34.1 1.61 V 279 36.6 3.3 4 4880.00 31.8 AV 54.0 -22.2 1.61 V 279 28.5 3.3 5 7320.00 42.5 PK 74.0 -31.5 1.32 V 184 33.6 8.9 6 7320.00 33.9 AV 54.0 -20.1 1.32 V 184 25.0 8.9 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF171130C28-5 Page No. 20 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

CHANNEL TX Channel 26 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 94.2 PK 1.25 H 24 95.7 -1.5 2 *2480.00 90.5 AV 1.25 H 24 92.0 -1.5 3 2483.50 61.2 PK 74.0 -12.8 1.25 H 24 62.7 -1.5 4 2483.50 47.3 AV 54.0 -6.7 1.25 H 24 48.8 -1.5 5 4960.00 39.4 PK 74.0 -34.6 2.86 H 210 36.1 3.3 6 4960.00 31.6 AV 54.0 -22.4 2.86 H 210 28.3 3.3 7 7440.00 41.7 PK 74.0 -32.3 1.63 H 210 32.6 9.1 8 7440.00 33.2 AV 54.0 -20.8 1.63 H 210 24.1 9.1 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 96.7 PK 1.17 V 12 98.2 -1.5 2 *2480.00 93.1 AV 1.17 V 12 94.6 -1.5 3 2483.50 64.5 PK 74.0 -9.5 1.17 V 12 66.0 -1.5 4 2483.50 51.0 AV 54.0 -3.0 1.17 V 12 52.5 -1.5 5 4960.00 39.8 PK 74.0 -34.2 1.62 V 272 36.5 3.3 6 4960.00 31.8 AV 54.0 -22.2 1.62 V 272 28.5 3.3 7 7440.00 42.2 PK 74.0 -31.8 1.27 V 189 33.1 9.1 8 7440.00 33.7 AV 54.0 -20.3 1.27 V 189 24.6 9.1 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF171130C28-5 Page No. 21 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

Below 1GHz Data: CHANNEL TX Channel 11 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 9kHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 109.18 20.6 QP 43.5 -22.9 1.00 H 110 31.5 -10.9 2 235.93 20.9 QP 46.0 -25.1 2.00 H 73 30.8 -9.9 3 320.54 23.7 QP 46.0 -22.3 1.50 H 295 30.1 -6.4 4 576.23 28.4 QP 46.0 -17.6 1.50 H 159 29.6 -1.2 5 724.18 30.7 QP 46.0 -15.3 1.00 H 68 29.7 1.0 6 962.87 34.4 QP 54.0 -19.6 1.00 H 190 30.1 4.3 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 39.31 24.7 QP 40.0 -15.3 2.00 V 52 33.1 -8.4 2 158.50 23.1 QP 43.5 -20.4 1.50 V 151 31.1 -8.0 3 315.01 23.7 QP 46.0 -22.3 2.00 V 275 30.4 -6.7 4 403.67 25.9 QP 46.0 -20.1 1.00 V 105 30.8 -4.9 5 610.57 29.1 QP 46.0 -16.9 1.50 V 328 29.5 -0.4 6 762.30 31.7 QP 46.0 -14.3 1.50 V 30 29.5 2.2 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF171130C28-5 Page No. 22 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

4.2 6dB Bandwidth Measurement 4.2.1 Limits of 6dB Bandwidth Measurement The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.2.2 Test Setup Spectrum EUT Attenuator Analyzer 4.2.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.2.4 Test Procedure a. Set resolution bandwidth (RBW) = 100kHz b. Set the video bandwidth (VBW) ≥ 3 x RBW, Detector = Peak. c. Trace mode = max hold. d. Sweep = auto couple. e. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.2.5 Deviation fromTest Standard No deviation. 4.2.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF171130C28-5 Page No. 23 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

uces veniras 4.2.7 Test Result 6dB Bandwidth Minimum Limit . Channel Frequency (MHz) (MHz) (MHz) Pass / Fail 11 2405 1.62 0.5 Pass 18 2440 1.59 0.5 Pass 26 2480 1.62 0.5 Pass Spectrum Plot of Worst Value CH18 RBW 100 kHz [F1] MP VEW Marker 1 [71] VBw 300 kiz 651 dBm . j _ Refti dn Att 20 08 SWT 2.5 me 243021 GHz Offsct 1 d8 Detta 2 [1] 0.00 48 q —|—BL—0.51—4Be 1.59 MHz D2 6.51 dBm 40 /N \M\ eA aso W\ N/ _7 \C /‘“"‘* ~40 —50 50 —70 —80 FL Fp 89 —l I I I I I I I I EEXUENGrm Center 2.44 GHz 400 kHz Span 4 MHz Report No.: RF171130028—5 Page No. 24 / 32 Report Format Version: 6.1.1

4.3 Conducted Output Power Measurement 4.3.1 Limits of Conducted Output Power Measurement For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt (30dBm). 4.3.2 Test Setup EUT Power Sensor Power Meter Attenuator 4.3.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.3.4 Test Procedures A peak / average power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak / average power sensor. Record the power level. 4.3.5 Deviation from Test Standard No deviation. 4.3.6 EUT Operating Conditions Same as Item 4.2.6. Report No.: RF171130C28-5 Page No. 25 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

4.3.7 Test Results FOR PEAK POWER Frequency Peak Power Peak Power Limit Channel Pass/Fail (MHz) (mW) (dBm) (dBm) 11 2405 1.963 2.93 30 Pass 18 2440 1.95 2.90 30 Pass 26 2480 1.936 2.87 30 Pass FOR AVERAGE POWER - reference only Frequency Average Power Average Power Channel (MHz) (mW) (dBm) 11 2405 1.945 2.89 18 2440 1.914 2.82 26 2480 1.875 2.73 Report No.: RF171130C28-5 Page No. 26 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

4.4 Power Spectral Density Measurement 4.4.1 Limits of Power Spectral Density Measurement The Maximum of Power Spectral Density Measurement is 8dBm in any 3 kHz. 4.4.2 Test Setup Spectrum EUT Attenuator Analyzer 4.4.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.4.4 Test Procedure a. Set analyzer center frequency to DTS channel center frequency. b. Set the span to 1.5 times the DTS bandwidth. c. Set the RBW to: 3 kHz ≤ RBW ≤ 100 kHz. d. Set the VBW ≥ 3 × RBW. e. Detector = peak. f. Sweep time = auto couple. g. Trace mode = max hold. h. Allow trace to fully stabilize. i. Use the peak marker function to determine the maximum amplitude level within the RBW. 4.4.5 Deviation from Test Standard No deviation. 4.4.6 EUT Operating Condition Same as Item 4.2.6 Report No.: RF171130C28-5 Page No. 27 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

uces veniras 4.4.7 Test Results Channel Frequency PSD Limit Pass (MHz) (dBm/3kHz) (dBm/3kHz) /Fail 11 2405 —12.52 8 Pass 18 2440 —12.36 8 Pass 26 2480 —12.22 8 Pass Spectrum Plot of Worst Value CH26 RBW 3 kiz h MP vew Marker 1 71] VBW 10 kHz 1222 dBm ; _ Reftigm Att 20 48 SWT 270 ms 248013 GHz Offsct 1 d8 0 1 > eAy yn L* ' | T |__ —50 50 —70 —50 49— 1 1 1 1 1 1 EooeEcrt Center 2.48 GHz Span 2.43 MHz veRritas Report No.: RF171130028—5 Page No. 28 / 32 Report Format Version: 6.1.1

4.5 Conducted Out of Band Emission Measurement 4.5.1 Limits of Conducted Out of Band Emission Measurement Below 20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.5.2 Test Setup Spectrum EUT Attenuator Analyzer 4.5.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.5.4 Test Procedure MEASUREMENT PROCEDURE REF 1. Set the RBW = 100 kHz. 2. Set the VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. MEASUREMENT PROCEDURE OOBE 1. Set RBW = 100 kHz. 2. Set VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep = auto couple. 5. Trace Mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum amplitude level. 4.5.5 Deviation from Test Standard No deviation. 4.5.6 EUT Operating Condition Same as Item 4.2.6 4.5.7 Test Results The spectrum plots are attached on the following pages. D1 line indicates the highest level, and D2 line indicates the 20dB offset below D1. It shows compliance with the requirement. Report No.: RF171130C28-5 Page No. 29 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

CH 11 CH 18 CH 26 CH 11 Band edge CH 26 Band edge Report No.: RF171130C28-5 Page No. 30 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF171130C28-5 Page No. 31 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are FCC recognized accredited test firms and accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF171130C28-5 Page No. 32 / 32 Report Format Version: 6.1.1 Reference No.: 170718C17


Document Created: 2018-03-09 08:21:41
Document Modified: 2018-03-09 08:21:41
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC