HBW9526-12

FCC ID

Equipment: Commercial Door Operators Models VFOH5011, VFOH5021, VFOH5045

Chamberlain Group Inc, The 9526-12

300 Windsor Dr, Oak Brook, IL 60523 United States

Application
Frequency Range
Final Action Date
Granted
gz582U167p+NtlIlQ62Ang==
902.25-926.75
2020-05-06
APPROVED
0xbmKh5HQnMZz3o9Fiz0mQ==
902.25-926.75
2020-05-06
APPROVED
mrvAmiJ6J3GZUhxEzefWNQ==
902.25-926.75
2019-10-09
APPROVED
File NameDocument TypeDateDirect
Exhibit E Test Measurement Report per 2 1033 b6Test Report 2020-05-06 00:00:00 pdf
Exhibit A ID Label and location per 2 1033 b7 which lists ContainsID Label/Location Info 2020-05-06 00:00:00 pdf
Cover Letter Detailing the reason for the filing.Cover Letter(s) 2020-05-06 00:00:00 pdf
Exhibit A ID Label and location per 2 1033 b7ID Label/Location Info 2020-05-06 00:00:00 pdf
Cover Letter Requesting Class II Permissive Change detailing reason for filingCover Letter(s) 2020-05-06 00:00:00 pdf
Cover Letter Limited Modular ApprovalCover Letter(s) 2019-10-09 00:00:00 pdf
Cover Letter Requesting ConfidentialityCover Letter(s) 2019-10-09 00:00:00 pdf
Exhibit D Users Manual per 2 1033 b3Users Manual 2019-10-09 00:00:00 pdf
Exhibit C RE Test Setup photographsTest Setup Photos 2019-10-09 00:00:00 pdf
Exhibit C Internal Photographs per 2 1033 b7Internal Photos 2019-10-09 00:00:00 pdf
Exhibit C External Photographs per 2 1033 b7External Photos 2019-10-09 00:00:00 pdf
Exhibit B Block Diagram per 2 1033 b5Block Diagram N/A
Cover Letter Modular ApprovalCover Letter(s) 2019-10-09 00:00:00 N/A
Exhibit B Operational Description per 2 1033 b4Operational Description N/A
Misc Parts List ExhibitsParts List/Tune Up Info N/A
Exhibit B Schematics per 2 1033 b5Schematics N/A

Application Details:

EquipmentCommercial Door Operators Models VFOH5011, VFOH5021, VFOH5045
FRN0004301545
Grantee CodeHBW
Product Code9526-12
Applicant BusinessChamberlain Group Inc, The
Business Address300 Windsor Dr , Oak Brook,Illinois United States 60523
TCB ScopeA4: UNII devices & low power transmitters using spread spectrum techniques
TCB Email[email protected]
ApplicantBarbara Kelkhoff – Regulatory Engineering Manager
Applicant Phone
Applicant Fax630 516-6863
Applicant Email[email protected]
Applicant MailStop
Test FirmElite Electronic Engineering Inc.
Test Firm ContactKevin Halpin
Test Firm Phone 111
Test Firm Fax630-495-9785
Test Firm Email[email protected]
Certified ByBarbara Kelkhoff – Regulatory Project Manager
Comment [0xbmKh5HQnMZz3o9Fiz0mQ==]: Output Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This OEM module is restricted for use with the specific antenna(s) tested for in this filing. Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures. Class II permissive change to add host MC11.
Comment [gz582U167p+NtlIlQ62Ang==]: Output Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance. This OEM module is restricted for use with the specific antenna(s) tested for in this filing. Use of this single limited module certification is constraint to integrations into the Grantees own host devices and is subject to the FCC Permissive Change procedures. Class II permissive change to add host MC21
Comment [mrvAmiJ6J3GZUhxEzefWNQ==]: Output Power listed is Conducted. The antenna(s) used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter product procedures. OEMs and installers must be provided with antenna installation and transmitter operating conditions for satisfying RF exposure compliance.

© 2020 FCC.report
This site is not affiliated with or endorsed by the FCC