Cover Letter Requesting Certification

FCC ID: HBW7192

Cover Letter(s)

Download: PDF
FCCID_1402280

                                                                                              845 Larch Ave.
                                                                                          Elmhurst, IL 60126
                                                                                          Phone 630.993.6306
                                                                                            Fax 630.530.6140
                                                                    Email: barbara.kelkhoff@chamberlain.com




                                                                                      December 21, 2010




Federal Communications Commission
EQUIPMENT APPROVAL SERVICES
PO Box 358315
Pittsburgh, PA 15251-5315

Re: Request for Certification

Enclosed is an application and exhibits for Certification of a Remote Control Transmitter Model
953EV. Circuit board assembly 1D7075 -1 is used in Model 953EV. The 1D7075 circuit board
assembly in the test report is identical to circuit assembly 1D7075-1 except for the number of
pushbuttons.

I have included a typical instruction sheet indicating the FCC statement and important information.

The FCC ID of this model, upon certification, will be HBW7192.

We would appreciate your prompt attention to the submittal.

Sincerely,
THE CHAMBERLAIN GROUP, INC.


Barbara Kelkhoff
Regulatory Project Manager II


                                    LIST OF EXHIBITS
                              REMOTE CONTROL TRANSMITTER
                                  Model 1D7075-1 (953EV)




1.   Expository Statement
2.   Theory of Operation
3.   Schematic
4.   Photographs
5.   FCC Label Drawing
6.   Operating Instructions
7.   Test Report


                              EXPOSITORY STATEMENT
                           REMOTE CONTROL TRANSMITTER
                                Model 953EV (1D7075-1)


1. The instructions include statements required to assure compliance with the Commission's Rules; Part
15.

2. Labeling is in accordance with the Commission's labeling requirements, Parts 2 and 15, Section
15.19.

3. This transmitter is intended for use with the certified receivers of garage door and gate operator
systems manufactured by Chamberlain.

4. The transmitter is equipped with an automatically releasing push-button switch. Transmission is
terminated upon release of the push-button.

5. The Model 953EV transmitter is factory set to 315± 0.1% MHz. It is not intended to be readjusted
in the field, and specific instructions prohibiting tampering are provided to the user.

6. Test data for Model 953EV is part of this submission. No emissions were detected in the forbidden
bands below 1.0 GHz.



Certified by:

                  Barbara P. Kelkhoff
                  Manager, Regulatory Affairs



Document Created: 2011-01-10 15:24:08
Document Modified: 2011-01-10 15:24:08

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC