Cover Letter Requesting Certification

FCC ID: HBW1662

Cover Letter(s)

Download: PDF
FCCID_662212

                                                                                              845 Larch Ave.
                                                                                          Elmhurst, IL 60126
                                                                                          Phone 630.993.6306
                                                                                            Fax 630.530.6140
                                                                    Email: barbara.kelkhoff@chamberlain.com




                                                                                            May 22, 2006




Federal Communications Commission
EQUIPMENT APPROVAL SERVICES
PO Box 358315
Pittsburgh, PA 15251-5315

Re: Request for Certification

Enclosed is an application and exhibits for Certification of a Remote Control Transmitter Model
CLT1D. Circuit board assembly 1A5510CLT1D is used in Model CLT1D.

I have included a typical instruction sheet indicating the FCC statement and important information.

The FCC ID of this model, upon certification, will be HBW1662.

We would appreciate your prompt attention to the submittal.

Sincerely,
THE CHAMBERLAIN GROUP, INC.


Barbara Kelkhoff
Manager, Regulatory Affairs


                                    LIST OF EXHIBITS
                              REMOTE CONTROL TRANSMITTER
                                       Model CLT1D




1.   Expository Statement
2.   Theory of Operation
3.   Schematic
4.   Photographs
5.   FCC Label Drawing
6.   Operating Instructions
7.   Test Report


                          EXPOSITORY STATEMENT
                 2 FUNCTION, REMOTE CONTROL TRANSMITTER
                                Model CLT1D


1. The instructions include statements required to assure compliance with the Commission's Rules; Part
15.

2. Labeling is in accordance with the Commission's labeling requirements, Parts 2 and 15, Section
15.19.

3. This transmitter is intended for use with the certified receivers of garage door and gate operator
systems manufactured by Chamberlain, Genie ,and Linear.

4. The transmitter is equipped with an automatically releasing push-button switch. Transmission is
terminated upon release of the push-button.

5. Transmitter Model CLT1D is factory set to 300, 315 and 390 ± 0.1% MHz. It is not intended to be
readjusted in the field, and specific instructions prohibiting tampering are provided to the user.

6. Test data for Model CLT1D is part of this submission. No emissions were detected in the forbidden
bands below 1.0 GHz.



Certified by:

                  Barbara P. Kelkhoff
                  Manager, Regulatory Affairs



Document Created: 2006-05-26 10:35:50
Document Modified: 2006-05-26 10:35:50

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC