Exhibit D Users Manual per 2 1033 b3

FCC ID: HBW1573

Users Manual

Download: PDF
FCCID_170566

7/—3 /6 4M 7 YP0A L IA 5 $hAuQT;oM)S5 q73 —3154 M SECURITY® 37/5 MHz 3 Channel Remote Control The Security* remote control works only with door NOTICE: To comply with FCC rules, adjustment or modifications of this receiver openers and light controls having an orange "Smart" and/or transmitter are prohibited, except for changing the code setting or replacing the battery. THERE ARE NO OTHER USER SERVICEABLE PARTsS. button and a yellow indicator light. Programming instructions are described and illustrated below. The additional push buttons can also activate other garage door openers and/or light controls. {Instructions for programming light products are included with those accessories.) Children operating or playing with a garage door opener can injure themselves or others. The garage door could close and cause serious SECURITY* GARAGE DOOR OPENERS injury or death. Do not allow children to operate the wall push buttons or To Program the Opener to Accept remote controls. the Remote Control Code A moving garage door could injure or kill someone under it. Activate the opener only when you can see the door clearly, it is free of Select a remote control push button to operate the opener. obstructions, and is property adjusted. The large button is recommended for use with a garage door opener. 1. Press and hold the selected remote control push button. See SECURITY+ SECURITY+*+ Figure 1. Remote Control Garage Door Opener 2. Press and release the "Smart" (learn) button on the opener panel. See Figure 2. The indicator light on the panel will I'_3__| begin to blink and the opener lights will flash once. 3. Release the remote push button. Now the opener will operate when that remote control button is pressed. Test it by pressing the remote button to see that "Smart" (learn) Button Indicator Light the door goes up and down. Figure 1 Figure 2 Adding a remote can also be done from the door control, as follows: Open/Close/Stop Operation 1. With the door closed, press and hold a remote push button. Your Security«kE remote control can be programmed to operate 2. Press and hold the Light button on the door control. one door using all 3 buttons: the large button will only open 3. Press and hold the door control push bar. the door, the middle button will only close the door, and the third button will stop the door‘s movement. You may set up 4. After the opener lights flash, release all buttons. this feature as follows: Test by pressing the remote push button. 1. With the door closed, press and hold the To Erase All Remote Control Codes large remote push button. Press and hold the "Smart" button on the opener panel until 2. Press and hold the Lock button on the Close the indicator light turns off (about 6 seconds). All transmitter door control. Stop codes are now erased. Then follow the steps above to re— 3. Press and hold the door control push bar. program each remote control. When the opener lights flash, release all buttons. Test by To Control the Opener Lights pressing the large (Open) button on the remote. The door should open. Press it again while the door is open and nothing With Security«k transmitters, a remote push button can be should happen. Press the middle (C/lose) button and the door programmed to operate the opener lights without opening the should close. Press the third (Stop) button while the door is door. moving and it should stop immediately. 1. With the door closed, press and hold the remote button that you want to control the light. 2. Press and hold the Light button on the door control. 3. Press and hold the Lock button on the door control. 4. After the opener lights flash, release all buttons. Keep batteries away from small children. If swallowed, promptly notify Test by pressing the remote push button. The opener lights doctor. should turn on or off but the door should not move. The Remote Control Battery The lithium battery should produce power for up to 5 years. To replace battery, pry open case Replacement Parts vith visor clip or screwdriver, as shown. Insert | SECURITY*R remote case (cireuit board not included) — battery positive side up (+). 41A5056 —3; 3V2032 Lithium battery — 10A20; Visor clip —29B137 Dispose of old battery properly. FOR SERVICE DIAL OUR TOLL FREE NUMBER: 1—800—528—2817 © 1998, Chambertain Group Inc. 11442335 All Rights Reserved Printed in Mexico


Document Created: 2001-09-07 15:17:25
Document Modified: 2001-09-07 15:17:25
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC