RF Exposure Info

FCC ID: HBW-VIDSA1INT

RF Exposure Info

Download: PDF
FCCID_3951938

                                                   SGS-CSTC Standards Technical Services
                                                   (Shanghai) Co., Ltd.

588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China
Telephone:   +86 (0) 21 6191 5666                                                                        Report No.: SHEM180200141604
Fax:         +86 (0) 21 6191 5678
ee.shanghai@sgs.com
                                                                                                         Page:        1 of 11



1        Cover Page

                                                   RF MPE REPORT
Application No.:                        SHEM1802001416CR

Applicant:                              THE CHAMBERLAIN GROUP, INC.
FCC ID:                                 HBW-VIDSA1INT

IC:                                     2666A- VIDSA1INT

Equipment Under Test (EUT):
NOTE: The following sample(s) was/were submitted and identified by the client as
Product Name:                           Wi-Fi Security Camera
Model No.(EUT):                         MYQ-VIDSA1INT
Standards:                              FCC Rules 47 CFR §2.1091
                                        KDB447498 D01 General RF Exposure Guidance v06
                                        RSS-102 Issue 5 (March 2015)
Date of Receipt:                        2018-02-28
Date of Test:                           2018-03-24 to 2018-05-08
Date of Issue:                          2018-05-09
Test Result:                            Pass*

*   In the configuration tested, the EUT detailed in this report complied with the standards specified above.




                Parlam Zhan
             E&E Section Manager
The manufacturer should ensure that all products in series production are in conformity with the product sample detailed in this report.
If the product in this report is used in any configuration other than that detailed in the report, the manufacturer must ensure the new
system complies with all relevant standards. Any mention of SGS International Electrical Approvals or testing done by SGS
International Electrical Approvals in connection with, distribution or use of the product described in this report must be approved by SGS
International Electrical Approvals in writing.

This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-
document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that
information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole
responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction.
documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test
report refer only to thesample(s) tested and such sample(s) are retained for 90 days only


                                     SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.

                                                                                             Report No.: SHEM180200141604
                                                                                             Page:                  2 of 11




                                                                    Revision Record
              Version                      Description                                    Date                                     Remark

                   00                         Original                               2018-05-08                                          /




         Authorized for issue
         by:




                                                           Vincent Zhu / Project Engineer




                                                           Parlam Zhan /Reviewer




This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at www.sgs.com/terms_e-
document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this document is advised that
information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s instructions, if any. The Company’s sole
responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights and obligations under the transaction
documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any unauthorized alteration, forgery or falsification of the
content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of the law. Unless otherwise stated the results shown in this test
report refer only to thesample(s) tested and such sample(s) are retained for 90 days only


                                      SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.

                                                                                                Report No.: SHEM180200141604
                                                                                                Page:                  3 of 11




2         Contents
                                                                                                                                                                Page
1       COVER PAGE ................................................................................................................................................. 1
2       CONTENTS ..................................................................................................................................................... 3
3       GENERAL INFORMATION ........................................................................................................................... 4
    3.1          CLIENT INFORMATION .............................................................................................................................. 4
    3.1          GENERAL DESCRIPTION OF E.U.T. ......................................................................................................... 4
    3.2          TECHNICAL SPECIFICATIONS ................................................................................................................... 4
    3.3          TEST LOCATION ....................................................................................................................................... 5
    3.4          TEST FACILITY ......................................................................................................................................... 5
4       TEST STANDARDS AND LIMITS ............................................................................................................... 6
    4.1          FCC RADIOFREQUENCY RADIATION EXPOSURE LIMITS:......................................................................... 6
5       MEASUREMENT AND CALCULATION ..................................................................................................... 7
    5.1          MAXIMUM TRANSMIT POWER ................................................................................................................... 7
    5.2          MPE CALCULATION ............................................................................................................................... 10




 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s
instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction. documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any
unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of
the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only


                                      SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.

                                                                                                Report No.: SHEM180200141604
                                                                                                Page:                  4 of 11




3        General Information

3.1 Client Information
       Applicant:                                            THE CHAMBERLAIN GROUP, INC.
       Address of Applicant:                                 300 Windsor Drive Oakbrook, Illinois, USA 60523
       Manufacturer:                                         THE CHAMBERLAIN GROUP, INC.
       Address of Manufacturer:                              300 Windsor Drive Oakbrook, Illinois, USA 60523
                                                             1. Hangzhou Hikvision Technology Co., Ltd.
       Factory:
                                                             2. Hangzhou Hikvision Electronics Co., Ltd.
                                                             1. No.700, Dongliu Road, Binjiang District, Hangzhou City, Zhejiang,
                                                             310052, China
       Address of Factory:
                                                             2. No.299, Qiushi Road, Tonglu Economic Development Zone,
                                                             Tonglu County, Hangzhou, Zhejiang, 310052, China.

3.1 General Description of E.U.T.
       Power supply:                                         DC 5V 1A, 4.5W MAX By Adapter
                                                             Adapter:
                                                             Model:ED1-050100UA
                                                             INPUT:100-240V~,50/60Hz,0.2A
                                                             OUTPUT:5V 1A
       Test voltage:                                         AC 120V
       Cable:                                                DC Cable 300mm for Adapter

3.2 Technical Specifications
BLE:
         Antenna Gain                                        2.1 dBi
         Antenna Type                                        PCB Antenna
         Channel Spacing                                     2MHz
         Modulation Type                                     GFSK
         Number of Channels                                  40
         Operation Frequency                                 2402MHz to 2480MHz
         Power Class                                         <10mW
2.4G:
         Antenna Gain                                        2.1 dBi
         Antenna Type                                        PCB Antenna
         Channel Spacing                                     5MHz
         Modulation Type                                     802.11b: DSSS (CCK, DQPSK, DBPSK)
                                                             802.11g/n(HT20): OFDM (64QAM, 16QAM, QPSK, BPSK)
         Number of Channels                                  802.11b/g/n(HT20):11
         Operation Frequency                                 802.11b/g/n(HT20): 2412MHz to 2462MHz




 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s
instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction. documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any
unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of
the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only


                                      SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.

                                                                                                Report No.: SHEM180200141604
                                                                                                Page:                  5 of 11


5G:
         Antenna Gain                                        -4 dBi
         Antenna Type                                        PCB Antenna
         DFS Function                                        Slave without Radar detection
         TPC Function                                        Not Support



3.3 Test Location
          All tests were performed at:
          SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. E&E Lab
          588 West Jindu Road, Xinqiao, Songjiang, 201612 Shanghai, China
          Tel: +86 21 6191 5666        Fax: +86 21 6191 5678
          No tests were sub-contracted.

3.4 Test Facility
          The test facility is recognized, certified, or accredited by the following organizations:
            • CNAS (No. CNAS L0599)
          CNAS has accredited SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. to ISO/IEC
          17025:2005 General Requirements for the Competence of Testing and Calibration Laboratories
          (CNAS-CL01 Accreditation Criteria for the Competence of Testing and Calibration Laboratories)
          for the competence in the field of testing.
           • NVLAP (Certificate No. 201034-0)
          SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. is accredited by the National
          Voluntary Laboratory Accreditation Program(NVLAP). Certificate No. 201034-0.
           • FCC –Designation Number: CN5033
          SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd. has been recognized as an
          accredited testing laboratory.
          Designation Number: CN5033. Test Firm Registration Number: 479755.
           • Industry Canada (IC) – IC Assigned Code: 8617A
          The 3m Semi-anechoic chamber of SGS-CSTC Standards Technical Services (Shanghai) Co.,
          Ltd. has been registered by Certification and Engineering Bureau of Industry Canada for radio
          equipment testing with Registration No.: 8617A-1.
           • VCCI (Member No.: 3061)
          The 3m Semi-anechoic chamber and Shielded Room of SGS-CSTC Standards Technical
          Services (Shanghai) Co., Ltd. has been registered in accordance with the Regulations for
          Voluntary Control Measures with Registration No.: R-3868,C-4336,T-12221,G-10830 respectively.




 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s
instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction. documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any
unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of
the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only


                                      SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.

                                                                                                Report No.: SHEM180200141604
                                                                                                Page:                  6 of 11




4        Test Standards and Limits

4.1 FCC Radiofrequency radiation exposure limits:
  According to§1.1310, the limit for general population/uncontrolled exposures

               Frequency                            Power density(mW/cm 2)                        Averaging time(minutes)

          300MHz~1.5GHz                                           f/1500                                            30

          1.5GHz~100GHz                                              1.0                                            30



4.2 IC Radiofrequency radiation exposure limits:
  According to RSS-102 section 2.5.2, RF exposure evaluation is required if the separation distance
  between the user and/or bystander and the device’s radiating element is greater than 20 cm, except
  when the device operates as follows:
  below 20 MHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or less
  than 1 W (adjusted for tune-up tolerance);
  • at or above 20 MHz and below 48 MHz and the source-based, time-averaged maximum e.i.r.p. of the
  device is equal to or less than 4.49/ƒ0.5 W (adjusted for tune-up tolerance), where ƒ is in MHz;
  • at or above 48 MHz and below 300 MHz and the source-based, time-averaged maximum e.i.r.p. of the
  device is equal to or less than 0.6 W (adjusted for tune-up tolerance);
  • at or above 300 MHz and below 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the
  device is equal to or less than 1.31 x 10-2 ƒ0.6834 W (adjusted for tune-up tolerance), where ƒ is in MHz;
  • at or above 6 GHz and the source-based, time-averaged maximum e.i.r.p. of the device is equal to or
  less than 5 W (adjusted for tune-up tolerance).
  For 2.4G device, the limit of worse case is 2.68 W
  For 5G device,the limit of worse case is 4.53W




 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s
instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction. documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any
unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of
the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only


                                      SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.

                                                                                                Report No.: SHEM180200141604
                                                                                                Page:                  7 of 11




5        Measurement and Calculation

5.1 Maximum transmit power
The Power Data is based on the RF Test Report SHEM180200141601-BLE
     Test mode                Channel            Peak Power (dBm)                                                                Peak Power (mW)
                                                     2402                                         3.04                                      2.01
             GFSK                                    2440                                         3.83                                      2.42
                                                     2480                                         2.84                                      1.92

  The Power Data is based on the RF Test Report SHEM180200141602-2.4GHz.
                           Test Frequency
     Test mode                                   Average Power (dBm)  Average Power (mW)
                                (MHz)
                                 2412                   13.95                24.83
       802.11b                   2437                   14.39                27.48
                                 2462                   14.52                28.31
                                 2412                   12.26                16.83
       802.11g                   2437                   12.49                17.74
                                 2462                   12.49                17.74
                                 2412                   11.71                14.83
   802.11 n(HT20)                2437                   11.95                15.67
                                 2462                   12.08                16.14

The Power Data is based on the RF Test Report SHEM180200141603-5GHz.
                  Test Frequency    Average Power Average Power       EIRP                                                                             EIRP
  Test Mode
                       (MHz)            (dBm)          (mW)          (dBm)                                                                             (mW)
         11A                           5180                          14.21                         26.36                      10.21                    10.50
         11A                           5220                          13.35                         21.63                       9.35                     8.61
         11A                           5240                          12.75                         18.84                       8.75                     7.50
         11A                           5260                          11.93                         15.60                        N/A                      N/A
         11A                           5280                          11.99                         15.81                        N/A                      N/A
         11A                           5320                          11.54                         14.26                        N/A                      N/A
         11A                           5500                           9.39                          8.69                        N/A                      N/A
         11A                           5600                          10.57                         11.40                        N/A                      N/A
         11A                           5700                          11.65                         14.62                        N/A                      N/A
         11A                           5720                          11.33                         13.58                        N/A                      N/A
         11A                           5745                          12.29                         16.94                        N/A                      N/A
         11A                           5785                          11.89                         15.45                        N/A                      N/A
         11A                           5825                          11.08                         12.82                        N/A                      N/A
       11N20                           5180                          13.84                         24.21                       9.84                     9.64
 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s
instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction. documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any
unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of
the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only


                                      SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.

                                                                                                Report No.: SHEM180200141604
                                                                                                Page:                  8 of 11


       11N20                           5220                          12.90                         19.50                        8.9                     7.76
       11N20                           5240                          12.36                         17.22                       8.36                     6.85
       11N20                           5260                          11.48                         14.06                        N/A                      N/A
       11N20                           5280                          11.54                         14.26                        N/A                      N/A
       11N20                           5320                          11.16                         13.06                        N/A                      N/A
       11N20                           5500                           9.07                          8.07                        N/A                      N/A
       11N20                           5600                          10.17                         10.40                        N/A                      N/A
       11N20                           5700                          11.34                         13.61                        N/A                      N/A
       11N20                           5720                          10.98                         12.53                        N/A                      N/A
       11N20                           5745                          11.61                         14.49                        N/A                      N/A
       11N20                           5785                          11.11                         12.91                        N/A                      N/A
       11N20                           5825                          10.13                         10.30                        N/A                      N/A
       11N40                           5190                          12.68                         18.54                       8.68                     7.38
       11N40                           5230                          11.10                         12.88                        7.1                     5.13
       11N40                           5270                          10.75                         11.89                        N/A                      N/A
       11N40                           5310                          10.41                         10.99                        N/A                      N/A
       11N40                           5510                           7.94                          6.22                        N/A                      N/A
       11N40                           5590                           8.99                          7.93                        N/A                      N/A
       11N40                           5670                          10.08                         10.19                        N/A                      N/A
       11N40                           5710                          10.01                         10.02                        N/A                      N/A
       11N40                           5755                          10.57                         11.40                        N/A                      N/A
       11N40                           5795                          10.36                         10.86                        N/A                      N/A
      11AC20                           5180                          13.33                         21.53                       9.33                     8.57
      11AC20                           5220                          12.57                         18.07                       8.57                     7.19
      11AC20                           5240                          11.84                         15.28                       7.84                     6.08
      11AC20                           5260                          11.16                         13.06                        N/A                      N/A
      11AC20                           5280                          10.97                         12.50                        N/A                      N/A
      11AC20                           5320                          10.60                         11.48                        N/A                      N/A
      11AC20                           5500                           8.54                          7.14                        N/A                      N/A
      11AC20                           5600                           9.64                          9.20                        N/A                      N/A
      11AC20                           5700                          10.89                         12.27                        N/A                      N/A
      11AC20                           5720                          10.70                         11.75                        N/A                      N/A
      11AC20                           5745                          11.18                         13.12                        N/A                      N/A
      11AC20                           5785                          10.79                         11.99                        N/A                      N/A
      11AC20                           5825                           9.79                          9.53                        N/A                      N/A

 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s
instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction. documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any
unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of
the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only


                                      SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.

                                                                                                Report No.: SHEM180200141604
                                                                                                Page:                  9 of 11


      11AC40                           5190                          12.92                         19.59                       8.92                     7.80
      11AC40                           5230                          11.54                         14.26                       7.54                     5.68
      11AC40                           5270                          11.14                         13.00                        N/A                      N/A
      11AC40                           5310                          10.43                         11.04                        N/A                      N/A
      11AC40                           5510                           8.16                          6.55                        N/A                      N/A
      11AC40                           5590                           8.87                          7.71                        N/A                      N/A
      11AC40                           5670                          10.41                         10.99                        N/A                      N/A
      11AC40                           5710                          10.31                         10.74                        N/A                      N/A
      11AC40                           5755                          10.77                         11.94                        N/A                      N/A
      11AC40                           5795                          10.55                         11.35                        N/A                      N/A
      11AC80                           5210                          11.60                         14.45                        7.6                     5.75
      11AC80                           5290                          11.10                         12.88                        N/A                      N/A
      11AC80                           5530                           7.87                          6.12                        N/A                      N/A
      11AC80                           5610                           8.36                          6.85                        N/A                      N/A
      11AC80                           5690                           9.64                          9.20                        N/A                      N/A
      11AC80                           5775                          10.32                         10.76                        N/A                      N/A




 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s
instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction. documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any
unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of
the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only


                                      SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.

                                                                                                Report No.: SHEM180200141604
                                                                                                Page:                  10 of 11




5.2 MPE Calculation
  For BLE & 2.4G: The best case gain of the antenna is 2.1dBi. 2.1dB logarithmic terms convert to
  numeric result is nearly 1.62.

  For 5G: The best case gain of the antenna is -4dBi. -4dB logarithmic terms convert to numeric result is
  nearly 0.40.

  For BLE:
  The Max Conducted Output Power is 3.83dBm (2.42 mW)

  For 2.4GHz WiFi:
  The Max Conducted average Output Power is 14.52dBm (28.31 mW)

  For 5GHz WiFi:
  The Max Conducted average Output Power is 14.21dBm (26.36 mW)

  For FCC:
                                                 PG
  According to the formula S=                         , we can calculate S which is MPE.
                                                4R 2
  Note:                                    dBm
  1) P (Watts) =Power Input to antenna = 10 10 / 1000
  2) G (Antenna gain in numeric) = 10^ (Antenna gain in dBi /10)
  3) R = distance to the center of radiation of antenna (in meter) = 20cm
  4) MPE limit = 1mW/cm²
  For BLE:
          PG      2.42  1.62
  S=          =                =0.0008 mW/cm2
           2
         4R    4  400  3.14

  For 2.4GHz WiFi:
          PG     28.31  1.62
  S=          =                =0.0091 mW/cm2
           2
         4R    4  400  3.14

  For 5GHz WiFi:
          PG        26.36
  S=          =                =0.0052 mW/cm2
           2
         4R    4  400  3.14




 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s
instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction. documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any
unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of
the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only


                                      SGS-CSTC Standards Technical Services (Shanghai) Co., Ltd.

                                                                                                Report No.: SHEM180200141604
                                                                                                Page:                  11 of 11


  BLE and 2.4GHz WiFi modules can simultaneous transmitting, so the maximum rate of MPE is
   0.0008 0.0091
                =0.0099<=1.0.
     1.0    1.0
  BLE and 5GHz WiFi modules can simultaneous transmitting, so the maximum rate of MPE is
   0.0008 0.0052
                =0.006<=1.0.
     1.0    1.0
  according to the KDB447498 section 7.2 determine the device is exclusion from SAR test.


  For IC:
  For BLE:
  E.I.R.P.= P*G= 0.00242×1.62=0.004W<2.68W

  For 2.4GHz WiFi:
  E.I.R.P.= P*G= 0.02831×1.62=0.046W<2.68W

  For 5GHz WiFi:
  E.I.R.P.= P*G= 0.02636W<4.5W


  BLE and 2.4GHz WiFi modules can simultaneous transmitting, so the maximum rate of MPE is
   0.004 0.046
               =0.0187<=1.0.
    2.68   2.68
  BLE and 5GHz WiFi modules can simultaneous transmitting, so the maximum rate of MPE is
   0.004 0.026
               =0.0072<=1.0.
    2.68   4.53
  So,the device is exclusion from SAR test.




                                                               --End of the Report--




 This document is issued by the Company subject to its General Conditions of Service printed overleaf, available on request or accessible at
www.sgs.com/terms_and_conditions.htm and, for electronic format documents, subject to Terms and Conditions for Electronic Documents at
www.sgs.com/terms_e-document.htm. Attention is drawn to the limitation of liability, indemnification and jurisdiction issues defined therein. Any holder of this
document is advised that information contained hereon reflects the Company’s findings at the time of its intervention only and within the limits of Client’s
instructions, if any. The Company’s sole responsibility is to its Client and this document does not exonerate parties to a transaction from exercising all their rights
and obligations under the transaction. documents. This document cannot be reproduced except in full, without prior written approval of the Company. Any
unauthorized alteration, forgery or falsification of the content or appearance of this document is unlawful and offenders may be prosecuted to the fullest extent of
the law. Unless otherwise stated the results shown in this test report refer only to thesample(s) tested and such sample(s) are retained for 90 days only



Document Created: 2018-07-31 15:32:16
Document Modified: 2018-07-31 15:32:16

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC