RF Exposure InfoSAR Test Report Appendix A

FCC ID: H8NWLU3020

RF Exposure Info

Download: PDF
FCCID_613860

APPENDIX A: TEST CONFIGURATIONS AND TEST DATA A1: TEST CONFIGURATION The bottom of the EUT to the flat phantom distance 6 mm A-1

The edge of the EUT to the flat phantom distance 5 mm A-2

EUT Photo PIFA ANTENNA Reference Point A-3

A-4

Liquid Level Photo MSL 2450MHz D=151mm A-5

Date/Time: 2005/12/8 16:53:44 Test Laboratory: Advance Data Technology N800C-11b-Ch1-Mode 1 DUT: USB Adapter ; Type: WLU3020 ; Test Frequency: 2412 MHz Communication System: 802.11b ; Frequency: 2412 MHz ; Duty Cycle: 1:1 ; Modulation type: CCK Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.88 mho/m; εr = 51.3; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 6 mm (The bottom side of the EUT to the Phantom) Antenna type : PIFA Antenna ; Air temp. : 22.5 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Low Channel 1/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.831 mW/g Low Channel 1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.5 V/m Peak SAR (extrapolated) = 2.05 W/kg SAR(1 g) = 0.926 mW/g; SAR(10 g) = 0.453 mW/g Maximum value of SAR (measured) = 1.00 mW/g A-6

Date/Time: 2005/12/8 17:10:52 Test Laboratory: Advance Data Technology N800C-11b-Ch6-Mode 1 DUT: USB Adapter ; Type: WLU3020 ; Test Frequency: 2437 MHz Communication System: 802.11b ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: CCK Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.92 mho/m; εr = 51.2; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 6 mm (The bottom side of the EUT to the Phantom) Antenna type : PIFA Antenna ; Air temp. : 22.5 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Mid Channel 6/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.997 mW/g Mid Channel 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 21.0 V/m Peak SAR (extrapolated) = 2.08 W/kg SAR(1 g) = 0.915 mW/g; SAR(10 g) = 0.447 mW/g Maximum value of SAR (measured) = 1.00 mW/g A-7

Date/Time: 2005/12/8 17:46:16 Test Laboratory: Advance Data Technology N800C-11b-Ch11-Mode 1 DUT: USB Adapter ; Type: WLU3020 ; Test Frequency: 2462 MHz Communication System: 802.11b ; Frequency: 2462 MHz ; Duty Cycle: 1:1 ; Modulation type: CCK Medium: MSL2450 Medium parameters used: f = 2462 MHz; σ = 1.96 mho/m; εr = 51.1; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 6 mm (The bottom side of the EUT to the Phantom) Antenna type : PIFA Antenna ; Air temp. : 22.5 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 High Channel 11/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.882 mW/g High Channel 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 20.8 V/m Peak SAR (extrapolated) = 2.20 W/kg SAR(1 g) = 0.969 mW/g; SAR(10 g) = 0.472 mW/g Maximum value of SAR (measured) = 1.04 mW/g A-8

IE apr corp 1g/l0g Averaged SAR SAR; Eoom Sean:¥ahe AlongZ, X=4, Y=3 08 08 07 ML a 04 0.3 02 01 00

Date/Time: 2005/12/8 18:03:36 Test Laboratory: Advance Data Technology N800C-11g-Ch1-Mode 2 DUT: USB Adapter ; Type: WLU3020 ; Test Frequency: 2412 MHz Communication System: 802.11g ; Frequency: 2412 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.88 mho/m; εr = 51.3; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 6 mm (The bottom side of the EUT to the Phantom) Antenna type : PIFA Antenna ; Air temp. : 22.5 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Low Channel 1/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.327 mW/g Low Channel 1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.6 V/m Peak SAR (extrapolated) = 0.71 W/kg SAR(1 g) = 0.307 mW/g; SAR(10 g) = 0.150 mW/g Maximum value of SAR (measured) = 0.331 mW/g A - 10

Date/Time: 2005/12/8 18:21:16 Test Laboratory: Advance Data Technology N800C-11g-Ch6-Mode 2 DUT: USB Adapter ; Type: WLU3020 ; Test Frequency: 2437 MHz Communication System: 802.11g ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.92 mho/m; εr = 51.2; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 6 mm (The bottom side of the EUT to the Phantom) Antenna type : PIFA Antenna ; Air temp. : 22.5 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Mid Channel 6/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.349 mW/g Mid Channel 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.8 V/m Peak SAR (extrapolated) = 0.73 W/kg SAR(1 g) = 0.321 mW/g; SAR(10 g) = 0.157 mW/g Maximum value of SAR (measured) = 0.354 mW/g A - 11

Date/Time: 2005/12/8 18:40:40 Test Laboratory: Advance Data Technology N800C-11g-Ch11-Mode 2 DUT: USB Adapter ; Type: WLU3020 ; Test Frequency: 2462 MHz Communication System: 802.11g ; Frequency: 2462 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2462 MHz; σ = 1.96 mho/m; εr = 51.1; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 6 mm (The bottom side of the EUT to the Phantom) Antenna type : PIFA Antenna ; Air temp. : 22.5 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 High Channel 11/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.344 mW/g High Channel 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.8 V/m Peak SAR (extrapolated) = 0.77 W/kg SAR(1 g) = 0.336 mW/g; SAR(10 g) = 0.164 mW/g Maximum value of SAR (measured) = 0.367 mW/g A - 12

Date/Time: 2005/12/8 19:48:16 Test Laboratory: Advance Data Technology N800C-11g-Ch6 Turbo-Mode 2 DUT: USB Adapter ; Type: WLU3020 ; Test Frequency: 2437 MHz Communication System: 802.11g ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.92 mho/m; εr = 51.2; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 6 mm (The bottom side of the EUT to the Phantom) Antenna type : PIFA Antenna ; Air temp. : 22.5 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Mid Channel 6/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.336 mW/g Mid Channel 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 7.5 V/m Peak SAR (extrapolated) = 0.69 W/kg SAR(1 g) = 0.308 mW/g; SAR(10 g) = 0.151 mW/g Maximum value of SAR (measured) = 0.341 mW/g A - 13

Date/Time: 2005/12/8 19:15:56 Test Laboratory: Advance Data Technology C600-11b-Ch1-Mode 3 DUT: USB Adapter ; Type: WLU3020 ; Test Frequency: 2412 MHz Communication System: 802.11b ; Frequency: 2412 MHz ; Duty Cycle: 1:1 ; Modulation type: CCK Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.88 mho/m; εr = 51.3; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 5 mm (The edge side of the EUT to the Phantom) Antenna type : PIFA Antenna ; Air temp. : 22.5 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Low Channel 1/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.356 mW/g Low Channel 1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.9 V/m Peak SAR (extrapolated) = 0.772 W/kg SAR(1 g) = 0.338 mW/g; SAR(10 g) = 0.168 mW/g Maximum value of SAR (measured) = 0.367 mW/g A - 14

Date/Time: 2005/12/8 19:32:57 Test Laboratory: Advance Data Technology C600-11b-Ch6-Mode 3 DUT: USB Adapter ; Type: WLU3020 ; Test Frequency: 2437 MHz Communication System: 802.11b ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: CCK Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.92 mho/m; εr = 51.2; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 5 mm (The edge side of the EUT to the Phantom) Antenna type : PIFA Antenna ; Air temp. : 22.5 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Mid Channel 6/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.372 mW/g Mid Channel 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 13.3 V/m Peak SAR (extrapolated) = 0.774 W/kg SAR(1 g) = 0.354 mW/g; SAR(10 g) = 0.175 mW/g Maximum value of SAR (measured) = 0.382 mW/g A - 15

Date/Time: 2005/12/8 20:06:26 Test Laboratory: Advance Data Technology C600-11b-Ch11-Mode 3 DUT: USB Adapter ; Type: WLU3020 ; Test Frequency: 2462 MHz Communication System: 802.11b ; Frequency: 2462 MHz ; Duty Cycle: 1:1 ; Modulation type: CCK Medium: MSL2450 Medium parameters used: f = 2462 MHz; σ = 1.96 mho/m; εr = 51.1; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 5 mm (The edge side of the EUT to the Phantom) Antenna type : PIFA Antenna ; Air temp. : 22.5 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 High Channel 11/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.373 mW/g High Channel 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.5 V/m Peak SAR (extrapolated) = 0.810 W/kg SAR(1 g) = 0.373 mW/g; SAR(10 g) = 0.184 mW/g Maximum value of SAR (measured) = 0.411 mW/g A - 16

Date/Time: 2005/12/8 20:22:04 Test Laboratory: Advance Data Technology C600-11g-Ch1-Mode 4 DUT: USB Adapter ; Type: WLU3020 ; Test Frequency: 2412 MHz Communication System: 802.11g ; Frequency: 2412 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.88 mho/m; εr = 51.3; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 5 mm (The edge side of the EUT to the Phantom) Antenna type : PIFA Antenna ; Air temp. : 22.5 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Low Channel 1/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.122 mW/g Low Channel 1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.8 V/m Peak SAR (extrapolated) = 0.263 W/kg SAR(1 g) = 0.120 mW/g; SAR(10 g) = 0.059 mW/g Maximum value of SAR (measured) = 0.129 mW/g A - 17

Date/Time: 2005/12/8 20:57:08 Test Laboratory: Advance Data Technology C600-11g-Ch6-Mode 4 DUT: USB Adapter ; Type: WLU3020 ; Test Frequency: 2437 MHz Communication System: 802.11g ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.92 mho/m; εr = 51.2; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 5 mm (The edge side of the EUT to the Phantom) Antenna type : PIFA Antenna ; Air temp. : 22.5 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Mid Channel 6/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.131 mW/g Mid Channel 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.8 V/m Peak SAR (extrapolated) = 0.274 W/kg SAR(1 g) = 0.123 mW/g; SAR(10 g) = 0.062 mW/g Maximum value of SAR (measured) = 0.133 mW/g A - 18

Date/Time: 2005/12/8 21:14:32 Test Laboratory: Advance Data Technology C600-11g-Ch11-Mode 4 DUT: USB Adapter ; Type: WLU3020 ; Test Frequency: 2462 MHz Communication System: 802.11g ; Frequency: 2462 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2462 MHz; σ = 1.96 mho/m; εr = 51.1; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 5 mm (The edge side of the EUT to the Phantom) Antenna type : PIFA Antenna ; Air temp. : 22.5 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 High Channel 11/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.138 mW/g High Channel 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.8 V/m Peak SAR (extrapolated) = 0.291 W/kg SAR(1 g) = 0.131 mW/g; SAR(10 g) = 0.065 mW/g Maximum value of SAR (measured) = 0.143 mW/g A - 19

Date/Time: 2005/12/8 21:31:08 Test Laboratory: Advance Data Technology C600-11g-Ch6 Turbo-Mode 4 DUT: USB Adapter ; Type: WLU3020 ; Test Frequency: 2437 MHz Communication System: 802.11g ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.92 mho/m; εr = 51.2; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 5 mm (The edge side of the EUT to the Phantom) Antenna type : PIFA Antenna ; Air temp. : 22.5 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23 ; Postprocessing SW: SEMCAD, V1.8 Build 160 Mid Channel 6/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.126 mW/g Mid Channel 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.6 V/m Peak SAR (extrapolated) = 0.263 W/kg SAR(1 g) = 0.119 mW/g; SAR(10 g) = 0.059 mW/g Maximum value of SAR (measured) = 0.128 mW/g A - 20

Date/Time: 2005/12/8 16:19:45 Test Laboratory: Advance Data Technology System Validation Check-MSL 2450MHz DUT: Dipole 2450 MHz ; Type: D2450V2 ; Serial: 737 ; Test Frequency: 2450 MHz Communication System: CW ; Frequency: 2450 MHz; Duty Cycle: 1:1; Modulation type: CW Medium: MSL2450;Medium parameters used: f = 2450 MHz; σ = 1.9 mho/m; εr = 51.2; ρ = 1000 kg/m3 ; Liquid level : 151 mm Phantom section: Flat Section ; Separation distance : 10 mm (The feetpoint of the dipole to the Phantom)Air temp. : 22.5 degrees ; Liquid temp. : 21.4 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2005/3/23 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.6 Build 23; Postprocessing SW: SEMCAD, V1.8 Build 160 d=10mm, Pin=250mW/Area Scan (5x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 14.3 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 90.0 V/m; Power Drift = -0.142 dB Peak SAR (extrapolated) = 27.6 W/kg SAR(1 g) = 12.6 mW/g; SAR(10 g) = 5.76 mW/g Maximum value of SAR (measured) = 14.0 mW/g A - 21


Document Created: 2005-12-19 16:58:21
Document Modified: 2005-12-19 16:58:21
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC