RF Exposure Info 1

FCC ID: H8NWLU3010D11

RF Exposure Info

Download: PDF
FCCID_571760

APPENDIX A: TEST CONFIGURATIONS AND TEST DATA A1: TEST CONFIGURATION NB：Compaq EVO N800C The bottom of the EUT to the flat phantom distance 4 mm A-1

NB：Dell C600 The edge of the EUT to the flat phantom distance 6 mm A-2

EUT Photo Reference Point A-3

Liquid Level Photo MSL 2450MHz D=150mm A-4

Date/Time: 2005/7/14 13:39:15 Test Laboratory: Advance Data Technology SMCWUSBT-G Horizontal 11b N800C Mode 1 DUT: EZ ConnectTM g 802.11g 108Mbps Wireless USB2.0 Adapter ; Type: SMCWUSBT-G ; Test Frequency: 2412 MHz Communication System: 802.11b ; Frequency: 2412 MHz ; Duty Cycle: 1:1 ; Modulation type: CCK Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.91 mho/m; εr = 52.1; ρ = 1000 kg/m3 ; Liquid level : 150mm Phantom section: Flat Section ; Separation distance : 4 mm (The bottom side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.5 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.5 Build 19 ; Postprocessing SW: SEMCAD, V1.8 Build 146 Low Channel 1/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.553 mW/g Low Channel 1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 18.8 V/m Peak SAR (extrapolated) = 1.63 W/kg SAR(1 g) = 0.697 mW/g; SAR(10 g) = 0.291 mW/g Maximum value of SAR (measured) = 0.790 mW/g A-5

Date/Time: 2005/7/14 13:57:21 Test Laboratory: Advance Data Technology SMCWUSBT-G Horizontal 11b N800C Mode 1 DUT: EZ ConnectTM g 802.11g 108Mbps Wireless USB2.0 Adapter ; Type: SMCWUSBT-G ; Test Frequency: 2437 MHz Communication System: 802.11b ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: CCK Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.95 mho/m; εr = 52; ρ = 1000 kg/m3 ; Liquid level : 150mm Phantom section: Flat Section ; Separation distance : 4 mm (The bottom side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.5 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.5 Build 19 ; Postprocessing SW: SEMCAD, V1.8 Build 146 Mid Channel 6/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.636 mW/g Mid Channel 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 19.2 V/m Peak SAR (extrapolated) = 1.97 W/kg SAR(1 g) = 0.757 mW/g; SAR(10 g) = 0.312 mW/g Maximum value of SAR (measured) = 0.842 mW/g A-6

IE apr corp 1g/l0g Averaged SAR SAR; Eoom Sean:¥ahe AlongZ, X=3, Y=3 08 07 m¥ily o in & m 0.2 01 00

Date/Time: 2005/7/14 14:14:39 Test Laboratory: Advance Data Technology SMCWUSBT-G Horizontal 11b N800C Mode 1 DUT: EZ ConnectTM g 802.11g 108Mbps Wireless USB2.0 Adapter ; Type: SMCWUSBT-G ; Test Frequency: 2462 MHz Communication System: 802.11b ; Frequency: 2462 MHz ; Duty Cycle: 1:1 ; Modulation type: CCK Medium: MSL2450 Medium parameters used: f = 2462 MHz; σ = 1.98 mho/m; εr = 51.9; ρ = 1000 kg/m3 ; Liquid level : 150mm Phantom section: Flat Section ; Separation distance : 4 mm (The bottom side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.5 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.5 Build 19 ; Postprocessing SW: SEMCAD, V1.8 Build 146 High Channel 11/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.539 mW/g High Channel 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 17.3 V/m Peak SAR (extrapolated) = 1.46 W/kg SAR(1 g) = 0.614 mW/g; SAR(10 g) = 0.254 mW/g Maximum value of SAR (measured) = 0.695 mW/g A-8

Date/Time: 2005/7/14 14:34:26 Test Laboratory: Advance Data Technology SMCWUSBT-G Horizontal 11g N800C Mode 2 DUT: EZ ConnectTM g 802.11g 108Mbps Wireless USB2.0 Adapter ; Type: SMCWUSBT-G ; Test Frequency: 2412 MHz Communication System: 802.11g ; Frequency: 2412 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.91 mho/m; εr = 52.1; ρ = 1000 kg/m3 ; Liquid level : 150mm Phantom section: Flat Section ; Separation distance : 4 mm (The bottom side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.5 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.5 Build 19 ; Postprocessing SW: SEMCAD, V1.8 Build 146 Low Channel 1/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.279 mW/g Low Channel 1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.3 V/m Peak SAR (extrapolated) = 0.732 W/kg SAR(1 g) = 0.316 mW/g; SAR(10 g) = 0.131 mW/g Maximum value of SAR (measured) = 0.359 mW/g A-9

Date/Time: 2005/7/14 14:57:20 Test Laboratory: Advance Data Technology SMCWUSBT-G Horizontal 11g N800C Mode 2 DUT: EZ ConnectTM g 802.11g 108Mbps Wireless USB2.0 Adapter ; Type: SMCWUSBT-G ; Test Frequency: 2437 MHz Communication System: 802.11g ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.95 mho/m; εr = 52; ρ = 1000 kg/m3 ; Liquid level : 150mm Phantom section: Flat Section ; Separation distance : 4 mm (The bottom side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.5 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.5 Build 19 ; Postprocessing SW: SEMCAD, V1.8 Build 146 Mid Channel 6/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.259 mW/g Mid Channel 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 11.6 V/m Peak SAR (extrapolated) = 0.699 W/kg SAR(1 g) = 0.293 mW/g; SAR(10 g) = 0.121 mW/g Maximum value of SAR (measured) = 0.335 mW/g A - 10

Date/Time: 2005/7/14 15:15:09 Test Laboratory: Advance Data Technology SMCWUSBT-G Horizontal 11g N800C Mode 2 DUT: EZ ConnectTM g 802.11g 108Mbps Wireless USB2.0 Adapter ; Type: SMCWUSBT-G ; Test Frequency: 2462 MHz Communication System: 802.11g ; Frequency: 2462 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2462 MHz; σ = 1.98 mho/m; εr = 51.9; ρ = 1000 kg/m3 ; Liquid level : 150mm Phantom section: Flat Section ; Separation distance : 4 mm (The bottom side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.5 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.5 Build 19 ; Postprocessing SW: SEMCAD, V1.8 Build 146 High Channel 11/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.271 mW/g High Channel 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.3 V/m Peak SAR (extrapolated) = 0.742 W/kg SAR(1 g) = 0.308 mW/g; SAR(10 g) = 0.126 mW/g Maximum value of SAR (measured) = 0.350 mW/g A - 11

Date/Time: 2005/7/14 15:33:10 Test Laboratory: Advance Data Technology SMCWUSBT-G Horizontal 11g-Turbo N800C Mode 2 DUT: EZ ConnectTM g 802.11g 108Mbps Wireless USB2.0 Adapter ; Type: SMCWUSBT-G ; Test Frequency: 2437 MHz Communication System: 802.11g ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.95 mho/m; εr = 52; ρ = 1000 kg/m3 ; Liquid level : 150mm Phantom section: Flat Section ; Separation distance : 4 mm (The bottom side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.5 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.5 Build 19 ; Postprocessing SW: SEMCAD, V1.8 Build 146 Mid Channel 6 Turbo/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.276 mW/g Mid Channel 6 Turbo/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 12.8 V/m Peak SAR (extrapolated) = 0.737 W/kg SAR(1 g) = 0.310 mW/g; SAR(10 g) = 0.128 mW/g Maximum value of SAR (measured) = 0.354 mW/g A - 12

Date/Time: 2005/7/14 16:07:01 Test Laboratory: Advance Data Technology SMCWUSBT-G Vertical 11b C600 Mode 3 DUT: EZ ConnectTM g 802.11g 108Mbps Wireless USB2.0 Adapter ; Type: SMCWUSBT-G ; Test Frequency: 2412 MHz Communication System: 802.11b ; Frequency: 2412 MHz ; Duty Cycle: 1:1 ; Modulation type: CCK Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.91 mho/m; εr = 52.1; ρ = 1000 kg/m3 ; Liquid level : 150mm Phantom section: Flat Section ; Separation distance : 6 mm (The edge side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.5 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.5 Build 19 ; Postprocessing SW: SEMCAD, V1.8 Build 146 Low Channel 1/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.083 mW/g Low Channel 1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.75 V/m Peak SAR (extrapolated) = 0.174 W/kg SAR(1 g) = 0.083 mW/g; SAR(10 g) = 0.042 mW/g Maximum value of SAR (measured) = 0.090 mW/g A - 13

Date/Time: 2005/7/14 16:24:55 Test Laboratory: Advance Data Technology SMCWUSBT-G Vertical 11b C600 Mode 3 DUT: EZ ConnectTM g 802.11g 108Mbps Wireless USB2.0 Adapter ; Type: SMCWUSBT-G ; Test Frequency: 2437 MHz Communication System: 802.11b ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: CCK Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.95 mho/m; εr = 52; ρ = 1000 kg/m3 ; Liquid level : 150mm Phantom section: Flat Section ; Separation distance : 6 mm (The edge side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.5 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.5 Build 19 ; Postprocessing SW: SEMCAD, V1.8 Build 146 Mid Channel 6/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.089 mW/g Mid Channel 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.89 V/m Peak SAR (extrapolated) = 0.188 W/kg SAR(1 g) = 0.086 mW/g; SAR(10 g) = 0.044 mW/g Maximum value of SAR (measured) = 0.093 mW/g A - 14

IE apr corp Custom Averaged SAR SAR; Foom Sean:¥ahe AlongZ, X=3, Y=2 008 008

Date/Time: 2005/7/14 16:42:50 Test Laboratory: Advance Data Technology SMCWUSBT-G Vertical 11b C600 Mode 3 DUT: EZ ConnectTM g 802.11g 108Mbps Wireless USB2.0 Adapter ; Type: SMCWUSBT-G ; Test Frequency: 2462 MHz Communication System: 802.11b ; Frequency: 2462 MHz ; Duty Cycle: 1:1 ; Modulation type: CCK Medium: MSL2450 Medium parameters used: f = 2462 MHz; σ = 1.98 mho/m; εr = 51.9; ρ = 1000 kg/m3 ; Liquid level : 150mm Phantom section: Flat Section ; Separation distance : 6 mm (The edge side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.5 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.5 Build 19 ; Postprocessing SW: SEMCAD, V1.8 Build 146 High Channel 11/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.070 mW/g High Channel 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 4.37 V/m Peak SAR (extrapolated) = 0.148 W/kg SAR(1 g) = 0.069 mW/g; SAR(10 g) = 0.035 mW/g Maximum value of SAR (measured) = 0.075 mW/g A - 16

Date/Time: 2005/7/14 17:04:52 Test Laboratory: Advance Data Technology SMCWUSBT-G Vertical 11g C600 Mode 4 DUT: EZ ConnectTM g 802.11g 108Mbps Wireless USB2.0 Adapter ; Type: SMCWUSBT-G ; Test Frequency: 2412 MHz Communication System: 802.11g ; Frequency: 2412 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2412 MHz; σ = 1.91 mho/m; εr = 52.1; ρ = 1000 kg/m3 ; Liquid level : 150mm Phantom section: Flat Section ; Separation distance : 6 mm (The edge side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.5 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.5 Build 19 ; Postprocessing SW: SEMCAD, V1.8 Build 146 Low Channel 1/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.037 mW/g Low Channel 1/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.07 V/m Peak SAR (extrapolated) = 0.075 W/kg SAR(1 g) = 0.034 mW/g; SAR(10 g) = 0.017 mW/g A - 17

Date/Time: 2005/7/14 17:21:03 Test Laboratory: Advance Data Technology SMCWUSBT-G Vertical 11g C600 Mode 4 DUT: EZ ConnectTM g 802.11g 108Mbps Wireless USB2.0 Adapter ; Type: SMCWUSBT-G ; Test Frequency: 2437 MHz Communication System: 802.11g ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.95 mho/m; εr = 52; ρ = 1000 kg/m3 ; Liquid level : 150mm Phantom section: Flat Section ; Separation distance : 6 mm (The edge side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.5 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.5 Build 19 ; Postprocessing SW: SEMCAD, V1.8 Build 146 Mid Channel 6/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.034 mW/g Mid Channel 6/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.03 V/m Peak SAR (extrapolated) = 0.067 W/kg SAR(1 g) = 0.033 mW/g; SAR(10 g) = 0.016 mW/g Maximum value of SAR (measured) = 0.036 mW/g A - 18

Date/Time: 2005/7/14 17:40:16 Test Laboratory: Advance Data Technology SMCWUSBT-G Vertical 11g C600 Mode 4 DUT: EZ ConnectTM g 802.11g 108Mbps Wireless USB2.0 Adapter ; Type: SMCWUSBT-G ; Test Frequency: 2462 MHz Communication System: 802.11g ; Frequency: 2462 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2462 MHz; σ = 1.98 mho/m; εr = 51.9; ρ = 1000 kg/m3 ; Liquid level : 150mm Phantom section: Flat Section ; Separation distance : 6 mm (The edge side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.5 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.5 Build 19 ; Postprocessing SW: SEMCAD, V1.8 Build 146 High Channel 11/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.034 mW/g High Channel 11/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.02 V/m Peak SAR (extrapolated) = 0.072 W/kg SAR(1 g) = 0.034 mW/g; SAR(10 g) = 0.018 mW/g Maximum value of SAR (measured) = 0.038 mW/g A - 19

Date/Time: 2005/7/14 17:57:51 Test Laboratory: Advance Data Technology SMCWUSBT-G Vertical 11g-Turbo C600 Mode 4 DUT: EZ ConnectTM g 802.11g 108Mbps Wireless USB2.0 Adapter ; Type: SMCWUSBT-G ; Test Frequency: 2437 MHz Communication System: 802.11g ; Frequency: 2437 MHz ; Duty Cycle: 1:1 ; Modulation type: OFDM Medium: MSL2450 Medium parameters used: f = 2437 MHz; σ = 1.95 mho/m; εr = 52; ρ = 1000 kg/m3 ; Liquid level : 150mm Phantom section: Flat Section ; Separation distance : 4 mm (The bottom side of the EUT to the Phantom) Antenna type : Internal Antenna ; Air temp. : 22.0 degrees ; Liquid temp. : 21.5 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579 ; Calibrated: 2005/3/23 - Phantom: SAM 12 ; Type: SAM V4.0 ; Serial: TP 1202 - Measurement SW: DASY4, V4.5 Build 19 ; Postprocessing SW: SEMCAD, V1.8 Build 146 Mid Channel 6 Turbo/Area Scan (5x9x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 0.037 mW/g Mid Channel 6 Turbo/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 3.05 V/m Peak SAR (extrapolated) = 0.078 W/kg SAR(1 g) = 0.036 mW/g; SAR(10 g) = 0.018 mW/g Maximum value of SAR (measured) = 0.039 mW/g A - 20

Date/Time: 2005/7/14 09:49:53 Test Laboratory: Advance Data Technology System Validation Check-MSL 2450MHz DUT: Dipole 2450 MHz ; Type: D2450V2 ; Serial: 737 ; Test Frequency: 2450 MHz Communication System: CW ; Frequency: 2450 MHz; Duty Cycle: 1:1; Modulation type: CW Medium: MSL2450;Medium parameters used: f = 2450 MHz; σ = 1.96 mho/m; εr = 51.9; ρ = 1000 kg/m3 ; Liquid level : 150 mm Phantom section: Flat Section ; Separation distance : 10 mm (The feetpoint of the dipole to the Phantom)Air temp. : 22.0 degrees ; Liquid temp. : 21.5 degrees DASY4 Configuration: - Probe: ET3DV6 - SN1790 ; ConvF(4.35, 4.35, 4.35) ; Calibrated: 2004/12/20 - Sensor-Surface: 4mm (Mechanical Surface Detection) - Electronics: DAE3 Sn579; Calibrated: 2005/3/23 - Phantom: SAM 12; Type: SAM V4.0; Serial: TP 1202 - Measurement SW: DASY4, V4.5 Build 19; Postprocessing SW: SEMCAD, V1.8 Build 146 d=10mm, Pin=250mW/Area Scan (5x7x1): Measurement grid: dx=15mm, dy=15mm Maximum value of SAR (measured) = 13.3 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x7)/Cube 0: Measurement grid: dx=5mm, dy=5mm, dz=5mm Reference Value = 87.0 V/m; Power Drift = -0.027 dB Peak SAR (extrapolated) = 27.0 W/kg SAR(1 g) = 12.3 mW/g; SAR(10 g) = 5.7 mW/g Maximum value of SAR (measured) = 13.9 mW/g A - 21


Document Created: 2005-08-03 11:11:54
Document Modified: 2005-08-03 11:11:54
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC