SAR Report Part 3

FCC ID: H8NWLF010

RF Exposure Info

Download: PDF
FCCID_470919

D3: DAE

Calibration Laboratory of Schmid & Partner Engineering AG Zeughausstrasse 43, 8004 Zurich, Switzerland Client CALIBRATION CERTIFICATE mmmmmmmmemmmem Object(s) DAE3 — SN:579 Calibration procedure(s) QA CAL—O6.v3 Calibration procedure for the data acquisition unit (DAE) Calibration date: August 15, 2003 Condition of the calibrated item In Tolerance (according to the specific calibration document) This calibration statement documents traceability of M&TE used in the calibration procedures and conformity of the procedures with the ISO/IEC 17025 international standard. All calibrations have been conducted in the closed laboratory facility: environmenttemperature 22 +/— 2 degrees Celsius and humidity <75%. Calibration Equipment used (M&TE critical for calibration) Model Type ID # Cal Date Scheduled Calibration Fluke Process Calibrator Type 702 SN: 6295803 3—Sep—01 Sep—03 Name Function Signature Calibrated by: Philipp Storchenegger Technician 7:}w/{L ,L/‘ Approved by: Fin Bomholt R&D Director ”7? /{W he A C l P Date issued: August 15, 2003 This calibration certificate is issued as an intermediate solution until the accreditation process (based on ISO/IEC 17025 International Standard) for Calibration Laboratory of Schmid & Partner Engineering AG is completed.

DAE 3 SN: 579 DATE: 15.08.2003 1. Cal Lab. Incoming Inspection & Pre Test Modification Status Note Status here > > > > BC Visual Inspection Note anomalies...................... None Pre Test Indication Yes/No Probe Touch Function Yes Probe Collision Function Yes Probe Touch&Collision Function Yes 2. DC Voltage Measurement A/D — Converter Resolution nominal High Range: 1LSB = 6. 1uV , full range = 400 mV Low Range: 1LSB= 61inV , full range = 4 mV DASY measurement parameters: Auto Zero Time: 3 sec; Measuring time: 3 sec Calibration Factors X Y Z High Range rounded to 7 digits |_404.5370401__|_404.5593911__| 404.3923437 Low Range rounded to 6 digits 3.9686 3.9584 3.95 Connector Angle to be used in DASY System 311° High Range Input Reading in V % Error Channel X + Input 200mV 199999.6 0.00 20mV 19998.2 —0.01 Channel X — Input 20mV —19995.3 —0.02 Channel Y + Input 200mV 199999.8 0.00 20mV 19998.3 —0.01 Channel Y — Input 20mV —19993.6 —0.03 Channel Z + Input 200mV 200000.6 0.00 20mV 19997.8 —0.01 Channel Z — Input 20mV —19994.3 —0.03 Low Range Input Reading in uV % Error Channel X + Input 2mV 1999.99 0.00 0.2mV 199.66 —0.17 Channel X — Input 0.2mV —200.21 0.11 Channel Y + Input 2mV 1999.89 —0.01 0.2mV 199.20 —0.40 Channel Y — Input 0.2mV —201.14 0.57 Channel Z + Input 2mV 1999.99 0.00 0.2mV 199.18 —0.41 Channel Z — Input 0.2mV —202.26 113 Page 2 of 4


Document Created: 2004-09-13 19:16:20
Document Modified: 2004-09-13 19:16:20
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC