SCC Response Letter

FCC ID: H8NWLC010D53

Cover Letter(s)

Download: PDF
FCCID_111413

                                           Safety & Compliance Consulting
                                                  29 Sweetman Lane
                                            West Milford, NJ 07480—2932
                                               Tel/Fax (973) 728—5141

                                                                                                         August 1, 2000
                                                                                                       QTK2000—FO17A
Attn:                           Joseph Dichoso / FCC—OET
Re:                             FCC ID: H8NWLCO10D53
Applicant:                      Askey Computer Corporation
Correspondence Ref No:          14735
731 Confirmation Number:        EA97641
Date of FCC E—Mail:             06/23/00
Product Name:                   Wireless PC LAN Card
Composite Device:               2.4 GHz DSS Transceiver (Certification With FCC ID)
                                Class B Computing Device Peripheral (DoC with FCC logo)

Dear Mr. Dichoso:

Please note the following response to your issued comments:

1. We understand this productis classified as composite device with transmitter and computer peripheral subject to
   separate equipment authorizations. The transmitter portion will be authorized under Certification with FCC ID; and
   the computer peripheral portion will be authorized under DoC with FCC logo. Refer to the attached amended
   Label and User Manual to reflect DoC information and other corrections for operating frequency, output power and
   employed antenna.
    This product will employ one internal on—board antenna and will not offer any other internal or optional external
   antenna. The User Manual was amended to remove reference to any other antennas. Attached find close—up
   photograph of the internal on—board antenna, which has a rated antenna gain of 1.5dbi.
    We understand FCC noted a radiated emission spike that appeared in a restricted band when this device was
   operating on its highest frequency channel 11. Attached find the requested frequency band edge peak and average
   test data generated while this device was operating on highest frequency channel.
   The originally filed FCC Form 731 and User Manual contained errors regarding the maximum rated output power.
   The measured maximum power in 1 MHz peak power is approximately less than —1.1dBm.
   This product will use only an internal on—board antenna that is non—detachable or user replaceable, and as such, is in
   compliance with Section 15.203 for antenna requirements.
    This 2.4 GHz direct sequence spread spectrum transmitter can operate within 2.5 cm from human body and has
    effective peak radiated power of much less than 7dBm (5mW). As such, we understand this device can be
    considered categorically exempt from SAR measurements.
    This product will operate within 2412~2462 MHz frequency band.
    Attached find theoretical processing gain for frequency channels 1, 6 and 11 with data rate 2 and 11 Mbps that
    shows greater than 10dB processing gain.
    Attached find more—in—focus processing gain data, which includes highest data rate for each chip/symbol ratio.
    Also, this includes Gp=(S/N)o +Mj +Lsys calculations.

I trust the above response answers all outstanding comments and this application may now be authorized. If you have
any further questions or comments, please contact the undersigned immediately. Thank you for your attention and
cooperation in this mater.

Sincerely yours,

/é(u, iL
 ichard Mulle
Group Manager
Safety & Compliance Consulting



Document Created: 2000-08-01 11:09:47
Document Modified: 2000-08-01 11:09:47

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC