modular approval request

FCC ID: H8NRT410W

Cover Letter(s)

Download: PDF

FCCID_379500

FCC ID: H8NRT410W

Modular Approval Request Letter

Advance Data Technology

Dec. 04, 2003

Dear Application Examiner,

ASKEY COMPUTER CORP.’s 802.11 a/b/g Wireless Module, FCC ID: H8NRT410W,
would like to have your authorization as a modular approval. The requirements of
Public Notice DA00-1407 have been met and shown on the following statements.

1. “The modular transmitter must have its own RF shielding.”: The radio portion of
this module has been shielded, please see exhibition External Photo.

2. “The modular transmitter must have buffered modulation/data inputs.” The EUT
has buffered data inputs, it is integrated in chip AR2312.

3. “The modular transmitter must have its own power supply regulation.” The chips
RF converter which will influence the frequency radiation, have to be 2.5V DC
powered. The POE interface provides 12VDC, so there are regulators in front of
these chips, the part number of this regulator is LT1767EMS8.

4. “The modular transmitter must comply with the antenna requirements of section
15.203 and 15.204(C).” The EUT meets the FCC antenna requirements. The
spurious emission, unique antenna connector and photo of antennas are shown in
the test report.

5. “The modular transmitter must be tested in a stand alone configuration” The EUT
was tested in a stand-alone configuration. Please see section Photographs of Test
Configuration in the test report.

6. “The modular transmitter must be labeled with its own FCC ID number.” Please
see exhibition Label Sample for the FCC ID of this module. And also in the
exhibition Users Manual, there are instructions give to the OEM on how to label
the end product.

Report No.: 921121H01 1

Document Created: 2003-12-05 10:49:12
Document Modified: 2003-12-05 10:49:12

© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC