Manual

FCC ID: H8NBTM010

Users Manual

Download: PDF
FCCID_329926

Bluetooth Modem User Manual

 2003 All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of the seller. Disclaimer Information in this document is subject to change without notice. The material contained herein is supplied without representation or warranty of any kind. The seller therefore assumes no responsibility and shall have no liability of any kind arising from the supply or use of this document or the material contained herein. Trademarks All trademarks mentioned in this document are the property of their respective owners. March 19, 2003 Rev01

Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures: - Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. III

IMPORTANT NOTE: FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Contents 1 Introduction ..................................................7 1.1 Overview........................................................................7 1.2 Features ........................................................................7 1.3 Package Contents .........................................................7 1.4 Minimum System Requirements ....................................8 2 Bluetooth Modem Installation.......................9 2.2 Rear Panel.....................................................................9 2.1 LED Indicators .............................................................10 3 Bluetooth USB Dongle Installation ............. 11 3.1 Software Installation .................................................... 11 4 Making Internet Connection .......................17 4.1 Connecting to the Internet ...........................................17 4.2 Sharing Internet Connection ........................................18 Server Side ...............................................................18 Client Side.................................................................19 5 Removing Bluetooth Software....................21 6 Specification...............................................23 6.1 Bluetooth USB Dongle BT 210D..................................23 6.2 Bluetooth Modem 010 IC + V.90 ................................24 v


1 Introduction 1.1 Overview Thank you for choosing Bluetooth Modem. The Bluetooth Modem allows you to connect your personal computer to the Internet without cable. This is possible because it utilizes Bluetooth technology. Bluetooth is an open specification for short-range wireless networking standard and it is a low-cost wire-replacement technology that enables connectivity among a wide variety of electronic device such as computers, mobile phones, printers, laptops, PDAs and digital cameras. 1.2 Features • Plug-and-Play installation • Wireless connection with all Bluetooth Devices • Compliant with Bluetooth 1.1 • Supports File Transfer, Data Synchronization, Object Exchange, Network Access, Dial-up Networking, Serial Port Application • Supports up to 8 Bluetooth enable Devices 1.3 Package Contents Check the contents of the package against the pack contents checklist below. If any of the items is missing, contact the dealer from whom the equipment was purchased. • Bluetooth Modem • Bluetooth USB Dongle • Installation CD • Quick Installation Guide • Power Adapter and Cord 7

Bluetooth Modem User Guide 1.4 Minimum System Requirements Before installation, please check that your computer complies with the following requirements: • CPU 166 MHz or higher • Minimum 16Mb RAM • Operating System: Windows 98, Me, 2000, XP • CD-ROM • USB port 8

2 Bluetooth Modem Installation Bluetooth Modem is extremely practical; it does not require installation software or driver. Just plug the AC Power cord in the Bluetooth Modem and it is ready for use. For safety, make sure the telephone line is UNPLUGGED from your modem. 2.2 Rear Panel 1. Plug one end of the RJ-11 phone cord into the LINE jack on the Bluetooth Modem, and plug the other end into your phone jack on the wall. 2. If you want to use a telephone on the Bluetooth Modem’s phone line while the modem is not used, plug the telephone’s cord into the modem’s PHONE jack. 3. Plug the AC adapter into the modem’s AC IN jack, and plug the other end into an electrical outlet. Figure 2-2 Bluetooth Modem back panel LINK button 9

Bluetooth Modem User Guide If the Bluetooth USB Dongle cannot find the Bluetooth Modem after 1 minute press the LINK button to try again. 2.1 LED Indicators The Bluetooth Modem is equipped with three LEDs. Check the table below for more information. LEDs Color Status Description Power Green Off No power is supplied to the unit. Solid Power is connected to the unit. Data Green Off Idle. Blinking Transmitting/receiving data. O.H. Green Off Modem OFF Hook. Solid Modem ON Hook. Figure 2-1 Bluetooth Modem LED 10

3 Bluetooth USB Dongle Installation 3.1 Software Installation First, install the software provided in the CD and ONLY insert the Bluetooth USB Dongle after rebooting the PC. Follow the instructions below to install the software. 1. Close all Windows programs that are running. 2. Insert the provided Software Utility CD into your CD-ROM drive. If the installation screen does not pop up, run Setup.exe from D:\Utility&Driver of the Software Utility CD where D is the drive letter. 3. When the Welcome screen pops up, click Next. 4. When the License Agreement screen appears, select the I accept the terms in the license agreement check box, and click Next. 11

Bluetooth Modem User Guide 5. In the Device Information screen, enter the name of your computer in Device Name field and select whether it is Desktop or Laptop in Device Type. 6. To install the software to the default destination folder, click Next. If you are to install the software into a different folder, click Change to select another folder. Click Next to continue. 7. Click Install when the following screen appears. 12

3. Bluetooth USB Dongle Installation 8. Installation process can take some minutes, be patient. 9. On Windows XP, if the Driver Signature Notice appears, click OK to continue the installation. 13

Bluetooth Modem User Guide 10. Click Finish when the following screen appears 11. Plug your Bluetooth USB Dongle into your computer and click Yes to reboot. Note: Don’t remove the installation CD until the installation process is completely finished. Subject to your Windows OS, different situations will occur during or after the software installation. Follow these instructions to complete the installation. 14

3. Bluetooth USB Dongle Installation For Windows XP After rebooting the Windows, plug Bluetooth USB Dongle into your computer. The PnP wizard will appear as described below: 1. Windows Found New Hardware Wizard will pop up. Click Next. 2. If Windows logo compatibility message appears, click Continue Anyway. 3. Click Finish. Now you are done with the installation procedure. You should be able to find the Bluetooth Configuration icon located on the system tray and My Bluetooth Places icon the Desktop. Proceed to the next chapters to configure and obtain further information about how to operate this device. 15


4 Making Internet Connection 4.1 Connecting to the Internet Before you begin, make sure the Bluetooth Modem is turned on and it’s the distance with the Bluetooth USB Dongle does not exceed 10 meters, this is the maximum range covered by the Bluetooth 1.1. Now, just follow the steps below described: 1. Double-click Bluetooth Configuration icon on the system tray. 2. Double-click ZeevoEmbeddedDevice ZV-DUN icon If the connection between the Dongle and the Modem were successful, you will be able see this icon and the Connect BluetoothConnection screen will automatically pop-up. Figure 4-1 Connect BluetoothConnection screen 17

Bluetooth Modem User Guide In the related field(User name, Password, dial) enter the information provided by your Internet Service Provider and click Dial. Congratulation! You are ready to access the Internet. 4.2 Sharing Internet Connection You might want to allow other Bluetooth enabled devices such as computer or laptop to access the Internet using the same connection. Follow the instructions below to deploy your wireless personal network. Server Side 1. Select Start > Settings > Network Connections. 2. Right click on Bluetooth Connection icon, then click on Properties. The following screen will pop-up. Click on Advanced tab. On Internet Connection Sharing section, check all boxes. 18

4. Making Internet Connection 3. Click OK to finish. Client Side 1. Double-click Bluetooth Configuration icon on the system tray. 2. Select and double-click Entire Bluetooth Neighborhood. 3. Select and double-click on the computer that made the Dial-up Connection(in this case, Laptop B). 4. Double-click Network Access icon and the following screen will pop-up. Just click Connect. It will not initiate a real dial-up connection, it will just register your computer on the network and establish a connection between your computer(client) and the computer(server) that, in fact, made the dial-up. 19

Bluetooth Modem User Guide 20

5 Removing Bluetooth Software If for any reason you have to remove Bluetooth Configuration software, follow the steps below: 1. Click the Start > Settings > Control Panel. 2. Double-click Add or Remove Programs icon. 3. Select BT 500 Bluetooth Software 1.2 and click Remove. 4.Click Yes to continue the uninstallation. 5. Uninstallation process takes some minutes, be patient. 6. Uninstallation process is completed. Click Yes to reboot the computer. 21


6 Specification 6.1 Bluetooth USB Dongle BT 210D Power Supply Power Supply 5.0 VDC USB bus-powerd Operation Voltage 1.8V for core logic, 3.3V for RF Power Consumption Peak current in ACL data transfer 720Kbps = 55mA (T=25C) Peak current in SCO HV1 connection = 60mA Stand by current = 100uA RF Characteristics Radio Output Power 0dBm (Bluetooth Spec. 1.1 class 2 device) Receiver Sensitivity -80dBm (Single slot BER = 0.1%) Frequency Range 2402 – 2480MHz, in 2.4GHz license-free ISM band Carrier Frequency Drift ±25 KHz (Single slot packet) Antenna Type High-performance solid-state LTCC chip DRA (Dielectric Resonance Antenna) Impedance 50 ohm Gain 0 – 2 dBi VSWR 2 max Polarization Linear Azimuth Beamwidth Omni-directional 23

Bluetooth Modem User Guide 6.2 Bluetooth Modem 010 IC + V.90 Specifications are subject to change without notice General Description • External 5V DC power supply • LED display for Power on, off-hook and data transmit • Bluetooth profile support modem dial-up network • Support TAM through bluetooth (E-mail station’s option) • Support external case • Operation distance up to 10m • Support Firmware upgrade Bluetooth General Description • Bluetooth 1.1 core specification compliant • Encryption key length can option up to 128bytes • Support Internal antenna V.90 Modem General Description • ITU-T V.90 data rates 28000 bits/s – 56000 bits/s. • ITU-T V.42 LAPM and MNP1-4 error correction. • ITU-T V.44/V.42bis and MNP Class 5 data compression. • TIA/EIA 578 Class 1 FAX AT command. • TIA/EIA 602 standard for AT command set. • DTE speed up to 115200bps Bluetooth RF specification • Spread-Spectrum type: Frequency Hopping • Carrier Frequency drift: +/-25K • Modulation Type: GFSK • Frequency Range: 2402MHz ~ 2480MHz • (F=2402+KMHz, K=0,1,2~78) • Frequency Hopping times: 1600 times/sec 24

6. Specification • Overall Rx Sensitivity: -80dBm (typical) -70dBm (Maximum) • Output Power: (Class 2) up to 4dBm Bluetooth Data transmit • Line Rate: Asymmetric mode: 721Kbps & 57.6Kbps V.90 Modem Compatibility: • V.90 --- 56000,54667,53333,52000,50667,49333,48000,46667,45 333,42667,41333,40000,38667,37333,36000,34667,3333 3,32000,30667,29333,28000bps. • ITU-T V.34annex --- 33600,31200 • ITU-T V.34 --- 8800,26400,24000,21600,19200,16800bps • ITU-T V.32 bis --- 14400,12000,9600,7200,4800bps • ITU-T V.32 --- 9600,4800bps V.90 Modem Modulation: • 56000bps --- PCM • 33600,31200bps (V.34annex) --- TCM • 28800,26400,24000,21600,19200,16800bps (V.34) --- TCM • 14400,12000,9600,7200bps (V.32 bis) --- TCM • 4800bps (V.32bis) --- QAM • 9600,4800bps (V.32) --- TCM,QAM • 2400bps (V.22bis) --- QAM V.90 Modem Operation: • Full duplex or half duplex in Data mode. • Asynchronous operation. • Auto dial/answer. • Manual originate/answer. V.90 Modem Dialing Type: • Tone dialing. 25

Bluetooth Modem User Guide V.90 Modem Telephone Line Interface: • RJ-11 phone jack to PSTN line. V.90 Modem Receive Sensitivity: FCC/DOC JAPAN CTR21 -29 ±2 dBm -29 ±2 dBm -29 ±2 dBm V.90 Modem Transmit Level: FCC/DOC JAPAN CTR21 < -12 dBm -17±2dBm -15 ±2dBm V.90 Modem DTMF Signal Level (dBm) FCC/DOC JAPAN CTR21 Hi. G = -8 ± 1 dBm Hi. G = -8 ± 1 dBm Hi. G = - 9 ± 1 dBm Lo. G = -10 ± 1 dBm Lo. G = -10 ± 1 dBm Lo. G = -11 ± 1 Dbm V.90 Modem M/B Ratio FCC/DOC JAPAN CTR21 39/61±5% 10±1PPS 40/60±5% 10±1PPS 40/60±5% 10±1PPS V.90 Modem Return Loss FCC/DOC JAPAN CTR21 300Hz ~ 3400Hz > 300Hz ~ 3400Hz >10 300Hz ~ 3400Hz >7 10 dB dB dB V.90 Modem COMMUNICATION STANDARD • Compliant with FCC, JATE, CTR21 V.90 Modem DTMF Tone Frequency: Low Group Frequency (Hz) 697 770 852 941 High 1209 1 4 7 * Group 1336 2 5 8 0 Frequency 26

6. Specification Frequency 1477 3 6 9 # (Hz) 1633 A B C D Operation Temperature and Humidity: • +0 to 45 ¢J • 20% to 75% (Humidity) 27


Document Created: 2003-04-29 15:42:45
Document Modified: 2003-04-29 15:42:45
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC