Modular Approval Letter

FCC ID: H8N-WLU5540B

Cover Letter(s)

Download: PDF
FCCID_4041819

Askey Computer Corporation 10F, No. 119, Jiankang Rd., Zhonghe Dist., New Taipei City, Taiwan (R.O.C.) Cover Letter-Modular Approval FCC ID: H8N-WLU5540B Date: Aug. 15, 2018 Gentlemen: There’s a Wireless module that would like to have your authorization as a modular approval. The specific product as below, Wireless module with its designed features and specified description, meets special requirements for Full modular approval on FCC KDB996369 by cross-reference list below. Company: Askey Computer Corp Product Name: Wireless module Model Number: WLU5540B-D81(RoHS) FCC ID: H8N-WLU5540B Requirement of FCC KDB996369 Comply（Y/N） 1. The modular transmitter must have its Y own RF shielding. The EUT provides the RF shielding. See EUT photo. 2. The modular transmitter must have buffered Y modulation/data inputs (if such inputs are The EUT has its buffered modulation. Please provided) to ensure that the module will see the Schematic Diagram. comply with Part 15 requirements under conditions of excessive data rates or over-modulation. 3. The modular transmitter must have its Y own power supply regulation. The EUT has its own power supply regulation, please see the Schematic Diagram. 4. The modular transmitter must comply with the Y antenna and transmission system requirements The EUT meets the FCC antenna of Sections 15.203, 15.204(b) and 15.204(c). requirements. The antenna must either be permanently The EUT is designed with both unique attached or employ a “unique” antenna coupler antenna connector and permanently attached (at all connections between the module and the antenna. antenna, including the cable). The Please see the photo of antenna shown in the “professional installation” provision of Section exhibition. 15.203 is not applicable to modules but can apply to limited modular approvals under paragraph (b) of this section. 5. The modular transmitter must be tested Y in a stand‐alone configuration, i.e., the The EUT was tested with a test board, Please module must not be inside another device see test report and setup photo during testing.

Askey Computer Corporation 10F, No. 119, Jiankang Rd., Zhonghe Dist., New Taipei City, Taiwan (R.O.C.) 6. The modular transmitter must be labeled with Y its own FCC ID number, and, if the FCC ID is Please see exhibition label sample for the not visible when the module is installed inside FCC ID of this module. And also in the another device, then the outside of the device exhibition Users manual, there are into which the module is installed must also instructions give to the OEM on how to label display a label referring to the enclosed the end product. module. This exterior label can use wording such as the following: “Contains Transmitter Module FCC ID: H8N-WLU5540B or “Contains FCC ID: H8N-WLU5540B” Any similar wording that expresses the same meaning may be used. The Grantee may either provide such a label, an example of which must be included in the application for equipment authorization, or, must provide adequate instructions along with the module which explain this requirement. In the latter case, a copy of these instructions must be included in the application for equipment authorization. 7. The modular transmitter must comply with any Y specific rule or operating requirements The EUT is compliant with all applicable applicable to the transmitter and the FCC rules. Details instructions for manufacturer must provide adequate maintaining compliance are give in the User instructions along with the Manual. module to explain any such requirements. A copy of these instructions must be included in the application for equipment authorization. 8. The modular transmitter must comply with any Y applicable RF exposure requirements. For The EUT complies with RF exposure example, FCC Rules in Sections 2.1091, requirement. 2.1093 and specific Sections of Part 15, including 15.319(i), 15.407(f), 15.253(f) and 15.255(g), require that Unlicensed PCS, UNII and millimeter wave devices perform routine environmental evaluation for RF Exposure to demonstrate compliance. In addition, spread spectrum transmitters operating under Section 15.247 are required to address RF Exposure compliance in accordance with

Askey Computer Corporation 10F, No. 119, Jiankang Rd., Zhonghe Dist., New Taipei City, Taiwan (R.O.C.) Section 15.247(b)(4). Thank you. Sincerely, By: _________________________ John Chiou (Signature1) Title: Director On behalf of: Askey Computer Corp Telephone: 866-2-2228-7588


Document Created: 2018-09-27 17:19:59
Document Modified: 2018-09-27 17:19:59
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC