Test Report

FCC ID: H8N-BLT2010

Test Report

Download: PDF
FCCID_2887161

| MRT Technology (Suzhou) Co., Ltd Report No.: 1507RSU00815 F Phone: +86—512—66308358 Report Version: voi ‘ Fax: +86—512—66308368 issue Date: 01—21—2016 Web: www.mrt—cert.com MEASUREMENT REPORT FCC Part 15B FCC ID: HSN—BLT2010 APPLICANT: ASKEY COMPUTER CORP Application Type: Certification Product: Bluetooth Module Model No.: BLT2010(RoHS) FCC Classification: FCC Class B Digital Device (JBP) FCC Rule Part(s): FCC Part 15 Subpart B Test Procedure(s): ANSI C63.4: 2014 Test Date: January 10 ~ 13, 2016 , . I , ? \\\\\\lllll/I///, Reviewed By : ,._,QW'\"\ Ww S\@/@fi Approved B Pojy ie 7fl ChZ, —— 37— uns p rovea By Marlnc/en ( Marlin Chen ) z/S uhi (Aeerepiten) ERTRIERERégzaol The test results relate only to the samples tested. This equipment has been shown to be capable of compliance with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in ANSI €63.4—2014. Test results reported herein relate only to the item(s) tested. The test report shall not be reproduced except in full without the written approval of MRT Technology (Suzhou) Co., Ltd. FCC ID: H8BN—BLT2010 Page Number: 1 of 23

W T m ‘ Report No.: 1507RSUO0815 Revision History 1507RSU00815 Rev. 01 Initia! report 01—21—2016 FCC ID: HBN—BLT2010 Page Number: 2 of 23

IVR IA Report No.: 1507RSU00815 CONTENTS Description Page §2.1033 G@N@TAl INfOMMAtION ...... .000 0000e0e0ee e rieeereereeererreneneeeeeeeerreneneeeeeeneneeemeeneeneneneeemmeeneneeens 4 1. INTRODUCTION. 5 11. SCOD® ... cccscccccneemeenmeemmemeenmeenmenmeeneerennenmenmeeneenneenmeenneeneennenneeneenneenmenneene enc enmeenmeencencenn 5 1.2. MRT TGSt LOGAHION .........cceseemmemmeemmeenermenmeemermenmeneeneermeeneneenmeenenmeeneenmeenenmeeneeneen 5 2. PRODUCT INFORMATION ...... 000000000 en ervrrerrnnrreerrerrnerrnnrrevrrereneernrrrereneernerenrernrennrrnnrenrencens 6 21. EQUIDMGNtDBSCTIDNION.......... ces cesc enmeemmeenmenmenmeeneermmenmenmeeneenmeenmeeneermeenenmeeneemeenec 6 2.2. Device Capabilities. 2.3. Test Configuration .. 2.4. Test System Details — 2.5..= TGSt SORWBTO .........ccscenseememmeemmenmeenmmemmeemeenmmenmenmeeneenmmenmeenmenmmenmenmeenmenmeenenmeeneenenecn 7 2.6. EMI Suppression Device(s)/Modifications. 2.7. Labeling Requirem@nts............c.cl.zlclle 3. DESCRIPTION OF TEST ...... .cc ecnennenmenreneernernirnerrerennernernerrnrenneneennrennerneveneennrennrrnnrenrenneens 9 31. EV&IUAtION PTOGC@UUTO ...........cceseenseenmmemmeemmemmenmenmmermeenmmenmemernmenmeenmeenmenmmenenmeeneemeemecn 9 3.2. AC Line Conducted Emissions. 3.3. Radiated Emissiong................. 4. TEST EQUIPMENT CALIBRATION DATE... 5. MEASUREMENT UNCERTAINTY :.:. e00 en en erererrneerverrevrrerrnernerrereneernernrrnnrennrrnnrenrrnnee 12 6. TEST RESULT ... .cnceeenceneerneenerrerrnivnerrnrrrenrennernevnernerennenerrerennernevenernerennernevenernnrennrrnnrenrrnee 13 61. SUMMBTY ....cccsecmememenmemmenmmemeenmemmemeemermeneneeneenenmeeneenneenernmeeneenneenmeeneenneenecniees 13 6.2.— CONUUCH@U EMISSION M&ASUIEMONE ...........ccsceeseenemmermmenmeenmenmmenmenmmeeneenmeenmemeeneeneniees 14 6.2.1. Test Limit .. 6.2.2. Test Setup.... 6.2.9. Test Result of Conducted Emissions.. 6.3. RAQIAH@U EMISSION M@ASUTGM@Nt .............ceeseeeseememmermmenmeemeenmmenmenmeeneenmmenenenmeeneniees 17 6.8.1. Test Limit .. 6.3.2. Test Setup. .« 6.3.9. TeSt RGSUt Of RAQIRI@Q EMISSIONS .............sseeneenneenneeneennenmenmeeneennnenmenmeenmenmnenmnenceee 19 7. CONCLUSION .:. ceccmeremermmremeererememremeereneremmermrereneceemeereneceemenrreneneenmmennnenenennmmennen 23 FCC ID: HBN—BLT2010 Page Number: 3 of 23

IVH IMA Report No.: 1507RSU00815 §2.1033 General Information Applicant: ASKEY COMPUTER CORP Applicant Address: 10F, No.119, JIANKANG RD., ZHONGHE DIST., NEW TAIPEI CITY 23585, TAIWAN, R.O.C. Manufacturer: ASKEY COMPUTER CORP Manufacturer Address: 10F, No.119, JIANKANG RD., ZHONGHE DIST., NEW TAIPEI CITY 23585, TAIWAN, R.O.C. Test Site: MRT Technology (Suzhou) Co., Ltd Test Site Address: D8 Building, Youxin Industrial Park, No.2 Tian‘edang Rd., Wuzhong Economic Development Zone, Suzhou, China MRT FCC Registration No.: 809388 Model No.: BLT2010(RoHS) FCC ID: HBN—BLT2010 Test Device Serial No.: N/A [] Production [X Pre—Production [_] Engineering FCC Classification: FCC Class B Digital Device (JBP) Test Facility / Accreditations Measurements were performed at MRT Laboratory located in Tian‘edang Rd., Suzhou, China. * MRT facility is a FCC registered (MRT Reg. No. 809388) test facility with the site description report on file and has met all the requirements specified in Section 2.948 of the FCC Rules. * MRT facility is an IC registered (MRT Reg. No. 11384A—1) test laboratory with the site description on file at Industry Canada. * MRT facility is a VCCI registered (R—4179, G—814, C—4664, T—2206) test laboratory with the site description ;.._; @! AmercanAssacatonfo labretoy Acredtatin on file at VCCI Council. Accredited Laboratory * MRT Lab is accredited to ISO 17025 by the American MRT TECHNOLOGY (SUZHOU) CO., LTD. Association for Laboratory Accreditation (A2LA) under the American Association for Laboratory Accreditation Program (A2LA Cert. No. 3628.01) in EMC, Telecommunications and Radio testing for FCC, Industry Canada, EU and TELEC Rules. FCC ID: H8N—BLT2010 Page Number: 4 of 23

mfl Report No.: 1507RSUO00815 1. INTRODUCTION 1.1. Scope Measurement and determination of electromagnetic emissions (EMC) of radio frequency devices including intentional and/or unintentional radiators for compliance with the technical rules and regulations of the Federal Communications Commission and the Industry Canada Certification and Engineering Bureau. 1.2. MRT Test Location The map below shows the location of the MRT LABORATORY, its proximity to the Taihu Lake. These measurement tests were conducted at the MRT Technology (Suzhou) Co., Ltd. Facility located at D8 Building, Youxin Industrial Park, No.2 Tian‘edang Rd., Wuzhong Economic Development Zone, Suzhou, China. The detailed description of the measurement facility was found to be in compliance with the requirements of § 2.948 according to ANSI C€63.4—2009 on September 30, 2013. mastondden Wamngmen ME w e ledante Jn Pom Tabo Lake EJ Changiha isond Tob t D8 t € Joue _..-‘ Dnsharhuthe 5 ta 0 mumd g woal, 5td |ocgitin TBE molunsins Hitaneten muu Docntten im < y houdang mbiih gibliberten s k0# Dn“%fi?fi”“ r ied thin 900 hinorguans SarshanMowntain wfi mas Mcrgrren Ongihachen i e Xtangiren «. untanmang Hantaonin mm Bus mcik Huzhoo hi 2 FCC ID: HBN—BLT2010 Page Number: 5 of 23

m NR I‘ Report No.: 1507RSUO0815 2. PRODUCT INFORMATION 2.1. Equipment Description Bluetooth Module BLT2010(RoHS) 2402~2480MHz v3.0 + HS, v4.0 FHSS 1Mbps(GFSK), 2Mbps(P/4 DQPSK), 3Mbps (BDPSK) Internal 10Bi 2.2. Device Capabilities This device contains the following capabilities: Bluetooth (v3.0 + HS, v4.0) FCC ID: HBN—BLT2010 Page Number: 6 of 23

IVR IA Report No.: 1507RSU00815 2.3. Test Configuration The Bluetooth Module FCC ID: H8N—BLT2010 was tested per the guidance FCC Part 15 Subpart B: 2013 and ANSI €63.4: 2014 was used to reference the appropriate EUT setup for radiated spurious emissions testing and AC line conducted testing. Connection Diagram (— A—| EUT _] gucioow—_— (1) Test Table Test Chamber Signal Cable Type Signal Cable Description (A USB Cable Shielding, 2m 24. Test System Details The types for all equipments, plus descriptions of all cables used in the tested system (including inserted cards) are: Product Manufacturer [Model No. Serial No. Power Cord 1 Notebook Lenovo E430c MP—4CFX213/10 |Non—Shielded, 1.8m 2.5. Test Software Not applicable. 2.6. EMI Suppression Device(s)/Modifications No EMI suppression device(s) were added and/or no modifications were made during testing. FCC ID: HBN—BLT2010 Page Number: 7 of 23

IVR I‘ Report No.: 1507RSU00815 2.7. Labeling Requirements Per 2.1074 & 15.19; Docket 95—19 The label shall be permanently affixed at a conspicuous location on the device; instruction manual or pamphlet supplied to the user and be readily visible to the purchaser at the time of purchase. However, when the device is so small wherein placement of the label with specified statementis not practical, only the FCC ID must be displayed on the device per Section 15.19(a)(5). Please see attachment for FCC ID label and label location. FCC ID: HBN—BLT2010 Page Number: 8 of 23

IVR IA Report No.: 1507RSU00815 3. DESCRIPTION OF TEST 3.1. Evaluation Procedure The measurement procedures described in the American National Standard for Methods of Measurement of Radio—Noise Emission from Low—Voltage Electrical Equipment in the Range of 9kHz to 18GHz (ANSI C€63.4—2014) was used in the measurement of the Bluetooth Module FCC ID: HBN—BLT2010. DeVi@tiOn fFOM M@@SUF@M@Nt DFOGCBUUTE.................l.clles l en enecemmmeemmenmernmernmnenmerncn....NONE 3.2. AC Line Conducted Emissions The line—conducted facility is located inside an 8x4‘x4‘ shielded enclosure. A 1m x 2m wooden table 80cm high is placed 40¢m away from the vertical wall and 80cm away from the sidewall of the shielded room. Two 10kHz—30MHz, 500/50uH Line—Impedance Stabilization Networks (LISNs) are bonded to the shielded room floor. Power to the LISNs is filtered by external high—current high—insertion loss power line filters. These filters attenuate ambient signal noise from entering the measurement lines. These filters are also bonded to the shielded enclosure. The EUT is powered from one LISN and the support equipmentis powered from the second LISN. If the EUT is a DC—powered device, power will be derived from the source power supply it normally will be powered from and this supply line(s) will be connected to the second LISN. All interconnecting cables more than 1 meter were shortened to a 1 meter length by non—inductive bundling (serpentine fashion) and draped over the back edge of the test table. All cables were at least 40cm above the horizontal reference ground—plane. Power cables for support equipment were routed down to the second LISN while ensuring that that cables were not draped over the second LISN. Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up to their normal operating condition. The RF output of the LISN was connected to the receiver and exploratory measurements were made to determine the frequencies producing the maximum emission from the EUT. The receiver was scanned from 150 kHz to 30 MHz. The detector function was set to peak mode for exploratory measurements while the bandwidth of the analyzer was set to 9 kHz. The EUT, support equipment, and interconnecting cables were arranged and manipulated to maximize each emission. Each emission was also maximized by varying: power lines, the mode of operation or resolution, clock or data exchange speed, serolling H pattern to the EUT and/or support equipment whichever determined the worst—case emission. Once the worst case emissions have been identified, the one EUT cable configuration/arrangement and mode of operation that produced these emissions are used for final measurements on the same test site. Line conducted emissions test results are shown in Section 6.2. FCC ID: HBN—BLT2010 Page Number: 9 of 23

IVR IA Report No.: 1507RSU00815 3.3. Radiated Emissions The radiated test facilities consisted of an indoor 3 meter semi—anechoic chamber used for final measurements and exploratory measurements, when necessary. The measurement area is contained within the semi—anechoic chamber which is shielded from any ambientinterference. For measurements above 1 GHz absorbers are arranged on the floor between the turn table and the antenna mast in such a way so as to maximize the reduction of reflections. For measurements below 1GHz, the absorbers are removed. An MF Model 21088 turntable is used for radiated measurement. It is a continuously rotatable, remote controlled, metallic turntable and 2 meters (6.56 ft.) in diameter. The turn table is flush with the raised floor of the chamber in order to maintain its function as a ground plane. An 80em high PVC support structure is placed on top of the turntable. For all measurements, the spectrum was scanned through all EUT azimuths and from 1 to 4 meter receive antenna height using a broadband antenna from 30 MHz up to the upper frequency shown in 15.33(b)(1) depending on the highest frequency generated or used in the device or on which the device operates or tunes. For frequencies above 1GHz, linearly polarized double ridge ho antennas were used. For frequencies below 30 MHz, a calibrated loop antenna was used. When exploratory measurements were necessary, they were performed at 1 meter test distance inside the semi—anechoic chamber using broadband antennas, broadband amplifiers, and spectrum analyzers to determine the frequencies and modes producing the maximum emissions. Sufficient time for the EUT, support equipment, and test equipment was allowed in order for them to warm up to their normal operating condition. The test set—up was placed on top of the 0.8 meter high, 1 x 1.5 meter table. The EUT, support equipment, and interconnecting cables were arranged and manipulated to maximize each emission. Appropriate precaution was taken to ensure that all emissions from the EUT were maximized and investigated. The system configuration, mode of operation, if applicable, turntable azimuth, and receive antenna height was noted for each frequency found. Final measurements were made in the semi—anechoic chamber using calibrated, linearly polarized broadband and horn antennas. The test setup was configured to the setup that produced the worst case emissions. The spectrum analyzer was set to investigate all frequencies required for testing to compare the highest radiated disturbances with respect to the specified limits. The turntable containing the EUT was rotated through 360 degrees and the height of the receive antenna was varied 1 to 4 meters and stopped at the azimuth and height producing the maximum emission. Each emission was maximized by changing the orientation of the EUT through three orthogonal planes and changing the polarity of the receive antenna, whichever produced the worst—case emissions. According to 3B beam—width of horn antenna, the hom antenna should be always directed to the EUT when rising height. FCC ID: HBN—BLT2010 Page Number: 10 of 23

Report No.: 1507RSUO0815 4. TEST EQUIPMENT CALIBRATION DATE Conducted Emissions — SR2 Instrument Manufacturer |Type No. Asset No. Cali. Interval [Cali. Due Date EMI Test Receiver R&AS ESR7 MRTSUEO6OO1 [1 year 2016/11/03 |Two—Line V—Network R&AS ENV216 MRTSUEO6002 [1 year 2016/11/03 |Two—Line V—Network R&AS ENV216 MRTSUEO6003 [1 year 2016/11/03 Temperature/Humidity Meter |Ouleinuo N/A MRTSUEO6114 [1 year 2016/11/20 Radiated Emissions — AC1 Instrument Manufacturer |Type No. Asset No. Cali. Interval [Cali. Due Date Spectrum Analyzer Agilent E4447A MRTSUEOGO28 |1 year 2016/06/28 EMI Test Receiver R&AS ESR7 MRTSUEO6OO1 [1 year 2016/11/03 Preampiifier Agilent 83017A MRTSUEO6O20 [1 year 2016/03/29 |TRILOG Antenna Schwarzbeck |VULB3168 |MRTSUEO6172 |1 year 2016/12711 Broad—Band Horn Antenna Schwarzbeck |BBHA9120D |MRTSUEO6023 |1 year 2016/11/07 |Temperature/Humidity Meter |Ouleinuo N/A MRTSUEO6115 [1 year 2016/11/20 Software Version Function e3 V8.3.5 EMI Test Software FCC ID: HBN—BLT2010 Page Number: 11 of 23

IVR IA Report No.: 1507RSU00815 5. MEASUREMENT UNCERTAINTY Where relevant, the following test uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16—4—2. This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k = 2. AC Conducted Emission Measurement — SR2 Measuring Uncertainty for a Level of Confidence of 95% (U=2Uety)): 150kHz~30MHz: 3.5dB Radiated Emission Measurement — AC1 Measuring Uncertainty for a Level of Confidence of 95% (U=2Uety)): Horizontal: 30MHz~1GHz: 4.070B 1GHz~18GHz: 4.16 dB Vertical: 30MHz~1GHz: 4.18 dB 1GHz~18GHz: 4.76 dB FCC ID: HBN—BLT2010 Page Number: 12 of 23

IVR IA Report No.: 1507RSU00815 6. TEST RESULT 6.1. Summary Product Name: Bluetooth Module FCC ID: HBN—BLT2010 FCC Classification: FCC Class B Digital Device (JBP) Test Mode: Communication with Notebook FCC Part Section(s) Test Description Test Result 15107 Conducted Emissions Pass 15.109 Radiated Emissions Pass FCC ID: HBN—BLT2010 Page Number: 13 of 23

M m I‘ Report No.: 1507RSU00815 6.2. Conducted Emission Measurement 6.2.1. Test Limit 0.15 — 0.50 66 — 56 56 — 46 0.50 — 5.0 56 46 5.0 — 30 60 50 Note 1: The lower limit shall apply at the transition frequencies. Note 2: The limit decreases linearly with the logarithm of the frequency in the range 0.15MHz to 0.5MHz. 6.2.2. Test Setup Non—conductive table fe#i 08 mto * ground | y L | | plane B otle verinet grcund Bonded to horizontal. reference plane Vertical ground reference plane ECC ID: H8N—BLT2010 Page Number: 14 of 23

IVR IA Report No.: 1507RSU00815 6.2.3. Test Result of Conducted Emissions Site: SR2 Time: 2016/01/13 — 10:40 Limit: FCC_Part15.107_CE_AC Power_ClassB Engineer: Vince Yu Probe: ENV216_101683_Filter On Polarity: Line EUT: Bluetooth Module Power: AC 120V/60Hz Test Mode: Communication with Notebook 80 70 5 $ $ Frequency(MHz) No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV) (dB) (dBuV) (dBuV) 1 * 0.158 48.820 38.509 —16.748 65.568 10.311 oP 2 0.158 33.695 23.384 —21.873 55.568 10.311 AV 3 0.178 44.958 34.900 —19.620 64.578 10.058 oP 4 0.178 24.339 14.281 —30.240 54.578 10.058 AV 5 0.210 37.107 27.138 —26.099 63.205 9.969 oP 6 0.210 18.176 8.207 —35.029 53.205 9.969 AV 7 0.530 27.228 17.077 —28.772 56.000 10.151 oP 8 0.530 18.082 7.931 —27.918 46.000 10.151 AV 9 0.762 24.034 14.003 —31.966 56.000 10.031 oP 10 0.762 11.066 1.035 —34.934 46.000 10.031 AV 11 8.886 22.499 12.346 —37.501 60.000 10.153 oP 12 8.886 13.893 3.740 —36.107 50.000 10.153 AV Note: Measure Level (dBuV) = Reading Level (dBuV) + Factor (dB) Factor (dB) = Cable Loss (dB) + LISN Factor (dB). FCC ID: HBN—BLT2010 Page Number: 15 of 23

IVR IA Report No.: 1507RSU00815 Site: SR2 Time: 2016/01/13 — 10:47 Limit: FCC_Part15.107_CE_AC Power_ClassB Engineer: Vince Yu Probe: ENV216_101683_Filter On Polarity: Neutral EUT: Bluetooth Module Power: AC 120V/60Hz Test Mode: Communication with Notebook 80 Level(dBu) Frequency(Miz) No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV) (dB) (dBuV) (dBuV) 1 0.150 49.578 38.436 ~16.422 66.000 11.142 oP 2 0.150 37.536 26.394 —18.464 56.000 11.142 AV 3 * 0.158 49.309 39.019 ~16.259 65.568 10.290 oP 4 0.158 34.376 24.086 —21.193 55.568 10.290 AV 5 0.166 48.051 37.980 ~17.107 65.158 10.071 oP 6 0.166 30.171 20.100 —24.987 55.158 10.071 AV 7 0.186 42.678 32.643 —21.536 64.213 10.035 oP 8 0.186 20.471 10.436 —33.742 54.213 10.035 AV 9 0.202 41.145 31.137 —22.383 63.528 10.008 oP 10 0.202 21.801 11.793 —31.727 53.528 10.008 AV 11 0.770 25.633 15.596 —30.367 56.000 10.036 oP 12 0.770 8.434 —1.603 —37.566 46.000 10.036 AV Note: Measure Level (dBuV) = Reading Level (dBuiV) + Factor (dB) Factor (dB) = Cable Loss (dB) + LISN Factor (dB). FCC ID: HBN—BLT2010 Page Number: 16 of 23

U f A m I‘ Report No.: 1507RSU00815 6.3. Radiated Emission Measurement 6.3.1. Test Limit 30 — 88 3 40 88 — 216 3 43.5 216 — 960 3 46 Above 960 3 54 Note 1: The lower limit shall apply at the transition frequency. Note 2: Distance refers to the distance in meters between the measuring instrument antenna and the closed point of any part of the device or system. Note 3: E field strength (dBuV/m) = 20 log E field strength (uV/m) 6.3.2. Test Setup 30MHz ~ 1GHz Test Setup: (Antenna Tower) Antenna EUT l (Turntable) Test Receiver FCC ID: H8N—BLT2010 Page Number: 17 of 23

"-"\‘.f.—.— m IA Report No.: 1507RSU00815 1GHz ~18GHz Test Setup: 1~4 m (Antenna Tower) Euy l Antenna (Turntable) > t Pre—Amplifier Spectrum Analyzer s— _@ 18 FCC ID: H8N—BLT2010 Page Number: 18 of 23

Report No.: 1507RSUO0815 6.3.3. Test Result of Radiated Emissions Site: AC 1 Time: 2016/01/12 — 09:21 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Milo Li Probe: VULB 9168 _20—2000MHz Polarity: Horizontal EUT: Bluetooth Module Power: AC 120V/60Hz Test Mode: Communication with Notebook 8o 70 so 5o 40 E 3 1 2 : 4 5 6 § s + T +o+ t+ % 20 | & IIL__] | | | . 10 | ‘ 20 ‘ I 30 100 1000 Frequency(MHz) No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/im) (dB) (dBuV/m) (dBuV) 1 194.415 29.582 17.511 —13.968 43.500 12.021 aP 2 * 249.220 32.297 18.658 —13.703 46.000 13.639 aP 3 280.260 30.192 16.001 —15.808 46.000 14.191 aP 4 324.395 30.319 15122 —15.681 46.000 15.196 aP 5 360.770 31.605 15.600 —14.395 46.000 16.005 aP 6 392.780 29.874 13.291 16.126 46.000 16.583 aP Note: Measure Level (dBuiV/im} = Reading Level (dBuV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m). FCC ID: HBN—BLT2010 Page Number: 19 of 23

Report No.: 1507RSUO0815 Site: AC 1 Time: 2016/01/12 — 09:21 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Milo Li Probe: VULB 9168 _20—2000MHz Polarity: Vertical EUT: Bluetooth Module Power: AC 120V/60Hz Test Mode: Communication with Notebook 8o 70 so 5o € 40 E so § 2!—s a 55 3 1 + + + + T 4 2 + ‘ | 10 ‘ | 0 10 20 30 100 1000 Frequency(MHz) No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/im) (dB) (dBuV/m) (dBuV) 1 48.430 18.074 3.197 —21.926 40.000 14.877 oP 2 191.505 24.323 12.483 19177 43.500 11.840 oP 3 224.000 24.040 11.264 —21.960 46.000 12.776 oP 4 375.320 25.672 9.452 —20.328 46.000 16.220 oP 5 597.935 26.682 6.624 19.318 46.000 20.058 oP 6 * 796.785 28.246 5.412 ~17.754 46.000 22.834 oP Note: Measure Level (dBuiV/im} = Reading Level (dBuV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m). FCC ID: HBN—BLT2010 Page Number: 20 of 23

IVR IA Report No.: 1507RSU00815 Site: AC 1 Time: 2016/01/12 — 09:21 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Milo Li Probe: BBHAY120D_1—18GHz Polarity: Horizontal EUT: Bluetooth Module Power: AC 120V/60Hz Test Mode: Communication with Notebook 90 80 70 so 50 §a 4 E 20 | 20 10 0 10 1000 10000 18000 Frequency(MHz) No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/im) (dB) (dBuV/m) (dBuV) 1 2190.000 37.097 40.817 —36.903 74.000 —3.720 PK 2 2190.265 26.597 30.254 —27. 463 54.000 —3.718 AV 3 4247.000 37.990 37.051 —36.010 74.000 0.939 PK 4 4247.024 27.298 26.354 —26.707 54.000 0.939 AV 5 6457.000 40.521 34.753 —33.479 74.000 5.768 PK 6 * 6457.024 28.822 23.054 —25.178 54.000 5.768 AV Note: Measure Level (dBuiV/im} = Reading Level (dBuV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) — Pre_Amplifier Gain (dB). FCC ID: HBN—BLT2010 Page Number: 21 of 23

Report No.: 1507RSUO0815 Site: AC 1 Time: 2016/01/12 — 09:21 Limit: FCC_Part15.109_RE(3m)_Class B Engineer: Milo Li Probe: BBHAY120D_1—18GHz Polarity: Vertical EUT: Bluetooth Module Power: AC 120V/60Hz Test Mode: Communication with Notebook 20 8o 70 so 5o Level(dBuV/m) 40 30 20 10 0 10 1000 10000 18000 Frequency(MHz) No Flag Mark Frequency Measure Reading Over Limit Limit Factor Type (MHz) Level Level (dB) (dBuV/im) (dB) (dBuV/m) (dBuV) 1 2096.025 25.484 30.245 —28.516 54.000 —4.761 AV 2 2096.500 35.890 40.645 —38.110 74.000 —4.755 PK 3 4136.500 38.013 37.277 —35.987 74.000 0.736 PK 4 4136.524 25.976 25.240 —28.024 54.000 0.736 AV 5 6508.000 41.799 35.828 —32.201 74.000 5.971 PK 6 * 6508.540 31.094 25.124 —22.906 54.000 5.971 AV Note: Measure Level (dBuiV/im} = Reading Level (dBuV) + Factor (dB) Factor (dB) = Cable Loss (dB) + Antenna Factor (dB/m) — Pre_Amplifier Gain (dB). FCC ID: HBN—BLT2010 Page Number: 22 of 23

IVR I‘ Report No.: 1507RSU00815 7. CONCLUSION The data collected relate only the item(s) tested and show that the Bluetooth Module FCC ID: HBN—BLT2010 has been tested to comply with the requirements specified in §15.107 and §15.109 of the FCC Rules. The End FCC ID: HBN—BLT2010 Page Number: 23 of 23


Document Created: 2019-09-18 04:08:27
Document Modified: 2019-09-18 04:08:27
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC