H8N-AP6356S_User Manual

FCC ID: H8N-AP6356S

Users Manual

Download: PDF
FCCID_4217316

User Manual For WIFI+BT Combo Module AP6356S

2x2 Wi-Fi + Bluetooth 4.2 Module AP6356S: Features

Block diagram Antenna Layout This is the interface to RF connector, it shows the connection of the module’s antenna pad with an application of antenna.

General Specification Wi-Fi RF Specification 2.4GHz RF Specification Conditions: VBAT=3.3V ; VDDIO=3.3V ; Temp:25°C Feature Description WLAN Standard IEEE 802.11a/b/g/n/ac & Wi-Fi compliant Frequency Range 2.400 GHz ~ 2.483 GHz (2.4 GHz ISM Band) Number of Channels 2.4GHz：Ch1 ~ Ch13 802.11b : DQPSK, DBPSK, CCK Modulation 802.11 g/n : OFDM /64-QAM,16-QAM, QPSK, BPSK 802.11b /11Mbps : 16 dBm ± 1.5 dB @ EVM -9dB Output Power 802.11g /54Mbps : 15 dBm ± 1.5 dB @ EVM -25dB 802.11n /MCS7 : 14 dBm ± 1.5 dB @ EVM -27dB - 1Mbps PER @ -92 dBm, +/- 2dB SISO Receive - 2Mbps PER @ -90 dBm, +/- 2dB Sensitivity (11b,20MHz) - 5.5Mbps PER @ -87 dBm, +/- 2dB @8% PER - 11Mbps PER @ -85 dBm, +/- 2dB - 6Mbps PER @ -89 dBm, +/- 2dB - 9Mbps PER @ -88 dBm, +/- 2dB - 12Mbps PER @ -87 dBm, +/- 2dB SISO Receive - 18Mbps PER @ -84 dBm, +/- 2dB Sensitivity (11g,20MHz) - 24Mbps PER @ -81 dBm, +/- 2dB @10% PER - 36Mbps PER @ -78 dBm, +/- 2dB - 48Mbps PER @ -73 dBm, +/- 2dB - 54Mbps PER @ -71 dBm, +/- 2dB MIMO Receive - 6Mbps PER @ -91 dBm, +/- 2dB Sensitivity (11g,20MHz) - 9Mbps PER @ -90 dBm, +/- 2dB

@10% PER - 12Mbps PER @ -89 dBm, +/- 2dB - 18Mbps PER @ -87 dBm, +/- 2dB - 24Mbps PER @ -84 dBm, +/- 2dB - 36Mbps PER @ -81 dBm, +/- 2dB - 48Mbps PER @ -76 dBm, +/- 2dB - 54Mbps PER @ -74 dBm, +/- 2dB - MCS=0 PER @ -89 dBm, +/- 2dB - MCS=1 PER @ -86 dBm, +/- 2dB - MCS=2 PER @ -84 dBm, +/- 2dB SISO Receive - MCS=3 PER @ -80 dBm, +/- 2dB Sensitivity (11n,20MHz) - MCS=4 PER @ -77 dBm, +/- 2dB @10% PER - MCS=5 PER @ -72 dBm, +/- 2dB - MCS=6 PER @ -71 dBm, +/- 2dB - MCS=7 PER @ -69 dBm, +/- 2dB - MCS=0 PER @ -90 dBm, +/- 2dB - MCS=1 PER @ -89 dBm, +/- 2dB - MCS=2 PER @ -87 dBm, +/- 2dB - MCS=3 PER @ -84 dBm, +/- 2dB MIMO Receive - MCS=4 PER @ -80 dBm, +/- 2dB Sensitivity (11n,20MHz) - MCS=5 PER @ -75 dBm, +/- 2dB @10% PER - MCS=6 PER @ -73 dBm, +/- 2dB - MCS=7 PER @ -72 dBm, +/- 2dB - MCS=8 PER @ -87 dBm, +/- 2dB - MCS=15 PER @ -68 dBm, +/- 2dB Maximum Input Level 802.11b : -10 dBm 802.11g/n : -20 dBm Antenna Reference Small antennas with 0~2 dBi peak gain 5GHz RF Specification Conditions: VBAT=3.3V ; VDDIO=3.3V ; Temp:25°C Feature Description WLAN Standard IEEE 802.11a/b/g/n/ac & Wi-Fi compliant Frequency Range 5.15 GHz ~ 5.845 GHz (5.0 GHz ISM Band) Number of Channels 5.0GHz：Please see the table1 802.11a : OFDM /64-QAM,16-QAM, QPSK, BPSK Modulation 802.11n : OFDM /64-QAM,16-QAM, QPSK, BPSK 802.11ac : OFDM /256-QAM 802.11a /54Mbps : 13 dBm ± 1.5 dB @ EVM -25dB Output Power 802.11n /MCS7 : 12 dBm ± 1.5 dB @ EVM -27dB 802.11ac /MCS9 : 10 dBm ± 1.5 dB @ EVM -32dB - 6Mbps PER @ -88 dBm, +/- 2dB - 9Mbps PER @ -87 dBm, +/- 2dB - 12Mbps PER @ -86 dBm, +/- 2dB SISO Receive Sensitivity - 18Mbps PER @ -83 dBm, +/- 2dB (11a,20MHz) @10% PER - 24Mbps PER @ -80 dBm, +/- 2dB - 36Mbps PER @ -77 dBm, +/- 2dB - 48Mbps PER @ -72 dBm, +/- 2dB - 54Mbps PER @ -70 dBm, +/- 2dB - 6Mbps PER @ -90 dBm, +/- 2dB - 9Mbps PER @ -89 dBm, +/- 2dB - 12Mbps PER @ -88 dBm, +/- 2dB MIMO Receive Sensitivity - 18Mbps PER @ -86 dBm, +/- 2dB (11a,20MHz) @10% PER - 24Mbps PER @ -83 dBm, +/- 2dB - 36Mbps PER @ -80 dBm, +/- 2dB - 48Mbps PER @ -75 dBm, +/- 2dB - 54Mbps PER @ -71 dBm, +/- 2dB

- MCS=0 PER @ -88 dBm, +/- 2dB - MCS=1 PER @ -85 dBm, +/- 2dB - MCS=2 PER @ -83 dBm, +/- 2dB SISO Receive Sensitivity - MCS=3 PER @ -80 dBm, +/- 2dB (11n,20MHz) @10% PER - MCS=4 PER @ -76 dBm, +/- 2dB - MCS=5 PER @ -71 dBm, +/- 2dB - MCS=6 PER @ -70 dBm, +/- 2dB - MCS=7 PER @ -68 dBm, +/- 2dB - MCS=0 PER @ -89 dBm, +/- 2dB - MCS=1 PER @ -88 dBm, +/- 2dB - MCS=2 PER @ -86 dBm, +/- 2dB - MCS=3 PER @ -83 dBm, +/- 2dB MIMO Receive Sensitivity - MCS=4 PER @ -79 dBm, +/- 2dB (11n,20MHz) @10% PER - MCS=5 PER @ -74 dBm, +/- 2dB - MCS=6 PER @ -73 dBm, +/- 2dB - MCS=7 PER @ -71 dBm, +/- 2dB - MCS=8 PER @ -88 dBm, +/- 2dB - MCS=15 PER @ -68 dBm, +/- 2dB - MCS=0 PER @ -85 dBm, +/- 2dB - MCS=1 PER @ -82 dBm, +/- 2dB - MCS=2 PER @ -80 dBm, +/- 2dB SISO Receive Sensitivity - MCS=3 PER @ -77 dBm, +/- 2dB (11n,40MHz) @10% PER - MCS=4 PER @ -73 dBm, +/- 2dB - MCS=5 PER @ -69 dBm, +/- 2dB - MCS=6 PER @ -67 dBm, +/- 2dB - MCS=7 PER @ -66 dBm, +/- 2dB - MCS=0 PER @ -87 dBm, +/- 2dB - MCS=1 PER @ -85 dBm, +/- 2dB - MCS=2 PER @ -83 dBm, +/- 2dB - MCS=3 PER @ -80 dBm, +/- 2dB MIMO Receive Sensitivity - MCS=4 PER @ -76 dBm, +/- 2dB (11n,40MHz) @10% PER - MCS=5 PER @ -72 dBm, +/- 2dB - MCS=6 PER @ -70 dBm, +/- 2dB - MCS=7 PER @ -69 dBm, +/- 2dB - MCS=8 PER @ -85 dBm, +/- 2dB - MCS=15 PER @ -66 dBm, +/- 2dB - MCS=0, NSS1 PER @ -86 dBm, +/- 2dB - MCS=1, NSS1 PER @ -84 dBm, +/- 2dB - MCS=2, NSS1 PER @ -82 dBm, +/- 2dB - MCS=3, NSS1 PER @ -79 dBm, +/- 2dB SISO Receive Sensitivity - MCS=4, NSS1 PER @ -75 dBm, +/- 2dB (11ac,20MHz) @10% PER - MCS=5, NSS1 PER @ -70 dBm, +/- 2dB - MCS=6, NSS1 PER @ -69 dBm, +/- 2dB - MCS=7, NSS1 PER @ -68 dBm, +/- 2dB - MCS=8, NSS1 PER @ -64 dBm, +/- 2dB - MCS=0, NSS1 PER @ -88 dBm, +/- 2dB - MCS=1, NSS1 PER @ -87 dBm, +/- 2dB - MCS=2, NSS1 PER @ -85 dBm, +/- 2dB - MCS=3, NSS1 PER @ -82 dBm, +/- 2dB - MCS=4, NSS1 PER @ -78 dBm, +/- 2dB MIMO Receive Sensitivity - MCS=5, NSS1 PER @ -73 dBm, +/- 2dB (11ac,20MHz) @10% PER - MCS=6, NSS1 PER @ -72 dBm, +/- 2dB - MCS=7, NSS1 PER @ -71 dBm, +/- 2dB - MCS=8, NSS1 PER @ -67 dBm, +/- 2dB - MCS=0, NSS2 PER @ -87 dBm, +/- 2dB - MCS=8, NSS2 PER @ -63 dBm, +/- 2dB SISO Receive Sensitivity - MCS=0, NSS1 PER @ -84 dBm, +/- 2dB

(11ac,40MHz) @10% PER - MCS=1, NSS1 PER @ -81 dBm, +/- 2dB - MCS=2, NSS1 PER @ -79 dBm, +/- 2dB - MCS=3, NSS1 PER @ -76 dBm, +/- 2dB - MCS=4, NSS1 PER @ -73 dBm, +/- 2dB - MCS=5, NSS1 PER @ -68 dBm, +/- 2dB - MCS=6, NSS1 PER @ -67 dBm, +/- 2dB - MCS=7, NSS1 PER @ -66 dBm, +/- 2dB - MCS=8, NSS1 PER @ -61 dBm, +/- 2dB - MCS=9, NSS1 PER @ -60 dBm, +/- 2dB - MCS=0, NSS1 PER @ -86 dBm, +/- 2dB - MCS=1, NSS1 PER @ -84 dBm, +/- 2dB - MCS=2, NSS1 PER @ -82 dBm, +/- 2dB - MCS=3, NSS1 PER @ -79 dBm, +/- 2dB - MCS=4, NSS1 PER @ -76 dBm, +/- 2dB MIMO Receive Sensitivity - MCS=5, NSS1 PER @ -71 dBm, +/- 2dB (11ac,40MHz) @10% PER - MCS=6, NSS1 PER @ -70 dBm, +/- 2dB - MCS=7, NSS1 PER @ -69 dBm, +/- 2dB - MCS=8, NSS1 PER @ -64 dBm, +/- 2dB - MCS=9, NSS1 PER @ -63 dBm, +/- 2dB - MCS=0, NSS2 PER @ -84 dBm, +/- 2dB - MCS=9, NSS2 PER @ -60 dBm, +/- 2dB - MCS=0, NSS1 PER @ -81 dBm, +/- 2dB - MCS=1, NSS1 PER @ -78 dBm, +/- 2dB - MCS=2, NSS1 PER @ -76 dBm, +/- 2dB - MCS=3, NSS1 PER @ -72 dBm, +/- 2dB SISO Receive Sensitivity - MCS=4, NSS1 PER @ -69 dBm, +/- 2dB (11ac,80MHz) @10% PER - MCS=5, NSS1 PER @ -66 dBm, +/- 2dB - MCS=6, NSS1 PER @ -64 dBm, +/- 2dB - MCS=7, NSS1 PER @ -62 dBm, +/- 2dB - MCS=8, NSS1 PER @ -58 dBm, +/- 2dB - MCS=9, NSS1 PER @ -56 dBm, +/- 2dB - MCS=0, NSS1 PER @ -82 dBm, +/- 2dB - MCS=1, NSS1 PER @ -81 dBm, +/- 2dB - MCS=2, NSS1 PER @ -79 dBm, +/- 2dB - MCS=3, NSS1 PER @ -75 dBm, +/- 2dB - MCS=4, NSS1 PER @ -72 dBm, +/- 2dB MIMO Receive Sensitivity - MCS=5, NSS1 PER @ -69 dBm, +/- 2dB (11ac,80MHz) @10% PER - MCS=6, NSS1 PER @ -67 dBm, +/- 2dB - MCS=7, NSS1 PER @ -65 dBm, +/- 2dB - MCS=8, NSS1 PER @ -61 dBm, +/- 2dB - MCS=9, NSS1 PER @ -60 dBm, +/- 2dB - MCS=0, NSS2 PER @ -80 dBm, +/- 2dB - MCS=9, NSS2 PER @ -56 dBm, +/- 2dB Maximum Input Level 802.11a/n : -30 dBm Antenna Reference Small antennas with 0~2 dBi peak gain 5GHz(20MHz) Channel table Operating Channel Channel center Band (GHz) Numbers frequencies(MHz) 5.15GHz~5.25GHz 36 5180 40 5200 44 5220 48 5240 5.25GHz~5.35GHz 52 5260 56 5280 60 5300 64 5320

5.5GHz~5.7GHz 100 5500 104 5520 108 5540 112 5560 116 5580 120 5600 124 5620 128 5640 132 5660 136 5680 140 5700 5.725GHz~5.845GHz 149 5745 153 5765 157 5785 161 5805 165 5825 Bluetooth Specification Conditions : VBAT=3.3V ; VDDIO=3.3V ; Temp:25°C General Specification Feature Description Bluetooth Standard Bluetooth V4.2 of 1, 2 and 3 Mbps. Host Interface UART Antenna Reference Small antennas with 0~2 dBi peak gain Frequency Band 2402 MHz ~ 2480 MHz Number of Channels 79 channels Modulation FHSS, GFSK, DPSK, DQPSK

Pin Outline Pin Definition NO Name Type Description 1 GND － Ground connections 2 WL/BT_ANT0 I/O RF I/O port0 3 GND － Ground connections 4 GND － Ground connections 5 GND － Ground connections 6 GND － Ground connections 7 GND － Ground connections 8 GND － Ground connections 9 WL_ANT1 I/O RF I/O port1 10 GND － Ground connections 11 GND － Ground connections 12 NC － No connect 13 XTAL_OUT O External Crystal out 14 XTAL_IN I External Crystal in/ Single clock source in 15 WL_REG_ON I Low asserting reset for WiFi core 16 WL_HOST_WAKE O WLAN to wake-up HOST 17 SDIO_DATA_CMD I/O SDIO command line 18 SDIO_DATA_CLK I/O SDIO clock line 19 SDIO_DATA_3 I/O SDIO data line 3 20 SDIO_DATA_2 I/O SDIO data line 2

21 SDIO_DATA_0 I/O SDIO data line 0 22 SDIO_DATA_1 I/O SDIO data line 1 23 GND － Ground connections 24 NC － No connect 25 VIN_LDO P Internal Buck voltage generation pin 26 VIN_LDO_OUT P Internal Buck voltage generation pin 27 PCM_SYNC I/O PCM sync signal 28 PCM_IN I PCM data input 29 PCM_OUT O PCM Data output 30 PCM_CLK I/O PCM clock 31 LPO I External Low Power Clock input (32.768KHz) 32 GND － Ground connections 33 NC － No connect 34 VDDIO P I/O Voltage supply input 35 NC － No connect 36 VBAT P Main power voltage source input 37 NC － No connect 38 BT_REG_ON I Low asserting reset for Bluetooth core 39 GND － Ground connections 40 UART_TXD O Bluetooth UART interface 41 UART_RXD I Bluetooth UART interface 42 UART_RTS_N O Bluetooth UART interface 43 UART_CTS_N I Bluetooth UART interface 44 NC － No connect 45 NC － No connect 46 NC － No connect 47 NC － No connect 48 NC － No connect 49 BT_WAKE I HOST wake-up Bluetooth device 50 BT_HOST_WAKE O Bluetooth device to wake-up HOST Dimensions

Package MSL Level / Storage Condition

Description of Operation AP6356S is a 2X2 MIMO 802.11a/b/g/n/ac & BT 2.1+EDR、4.2 combo module from Broadcom Corporation. This module is targeted to mobile device including, Digital Still Cameras (DSCs), Portable Media Players (PMPs), and Gaming Devices, handheld wireless system, mobile phones which need small footprint package, low power consumption. BCM4356’s part is Bluetooth 2.1+EDR、4.2 LE compliant. Uses a radio technology called frequency-hopping spread spectrum, which chops up the data being sent and transmits chunks of it on up to 79 bands (1 MHz each; centered from 2402 to 2480 MHz). This range is in the globally unlicensed Industrial, Scientific and Medical (ISM) 2.4 GHz short-range radio frequency band. The basic data rate of BCM4356 are 1、2、3 Mbps & LE 1Mbps. The power class is 1 and use “客戶使用” antenna. Bluetooth is used in a small area for wireless personal area network that operated in 2.4 GHz ISM Band. It can be used to connect with mobile phone, modem, PDA, PC, handset, etc. The propagation range of Bluetooth is about 10 meters that is easy to setup personal wireless area network. Compliance with IEEE 802.11a/b/g/n/ac standard. BCM4356 used in AP6356S supports 11 channels in

2400 ~ 2483.5 MHz ISM band. The channel bandwidth of 802.11n is 20MHz in 2.4GHz and supports channel bandwidth of 802.11n/ac are 20MHz/40MHz/80MHz in 5GHz Band1 & Band4. The supporting data rates cover from 1Mbps to 433 Mbps in 802.11a/b/g/n/ac mode and will switch automatically. The modulation type is DBPSK/DQPSK/CCK in 802.11b and BPSK/QPSK/16-QAM/64-QAM/256-QAM in 802.11a/g/n/ac mode. Both of WLAN and Bluetooth in AP6356S use the same RF trace and share the same “客戶使用” antenna, which operates in 2.4GHz ISM and 5GHz UNII band also. WLAN device is used in the wide-area wireless communication network, and the operation frequencies covers ISM 2.4 GHz &UNII 5 GHZ band. It can be used to connect with mobile phone, PDA, PC, LAN, etc. The propagation range is larger than 100 meters. FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/ TV technician for help. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1） This device may not cause harmful interference. 2） This device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.” Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2)This device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d’Industrie Canada applicables aux appareils radio exempts de licence. L’exploitation est autorisée aux deux conditions suivantes : (1) l’appareil ne doit pas produire de brouillage; (2) l’utilisateur de l’appareil doit accepter tout brouillage radioélectrique subi, meme si le brouillage est susceptible d’en compromettre le fonctionnement.） Radiation Exposure Statement:

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installéet utiliséavec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.


Document Created: 2019-03-27 13:33:30
Document Modified: 2019-03-27 13:33:30
© 2025 FCC.report
This site is not affiliated with or endorsed by the FCC