User Manual

FCC ID: H5OTR75

Users Manual

Download: PDF
FCCID_4459498

LCD REMOTE CONTROL TRANSCEIVER:

A. CHANGING THE BATTERY

BATTERY REPLACEMENT: SLRF752

 The Two-Way remote transmitter is powered by one “AAA” Battery. When the power of the battery weakens
 A         icon shall be displayed on the LCD screen. When the old battery is replaced, there will be beep sounds to
 indicate the power is back up on the transmitter.




B. STANDARD LCD ICON CONFIGURATIONS :

              The lock icon will be displayed when                          The unlock icon will be displayed
                      the door are locked.                                    when the door are unlocked.
                      Hidden Alarm Mode
                                                                                        Valet Mode
               The security system arm with hidden
                                                                         All the function shall be temporally on hold.
                   alarm function (silent alarm)
                     Door Trigger (Zone 1)
                                                                                         Door Ajar
                     Door is illegally opened
                    Trunk Trigger (Zone 2)                                             Trunk Ajar or
                     Trunk is illegally opened                                        Trunk Release
                     Hood Trigger (Zone 3)
                                                                                         Hood Ajar
                     Hood is illegally opened.
                 Shock Sensor Trigger (Zone 5)                                 Tilt Sensor Trigger (Zone 6)
                 No Icon = Shock Sensor Bypass                                 No Icon = Tilt Sensor Bypass
                  With Icon = With Shock Sensor                                 With Icon = With Tilt Sensor
               Icon Flashing = Shock Sensor trigger                          Icon Flashing = Tilt Sensor trigger


                       Ignition Trigger (Zone 4)
                 (Icon flash) Ignition switch was illegally                          System Trigger or Panic mode
                               turned on.
                           Engine Cranking
                                                                                           Engine Running
                 Your vehicle engine cranking by remote
                                                                                     Your vehicle’s engine is running
                                 control.
                          Timer Control Start
                                                                                   Display the set up Running time
                    Engine starts automatically every
                                                                                      interval 2 / 3 / 24 Hours
                               2 or 3 hours
                      Temperature Control Start
                                                                                 Display the set up start temperature
                Engine will start at a specified temperature
                                                                                              nd
                      Manual Transmission Mode                      2                     2        Car Operation

                            Driver Paging
                 Someone is paging you from of your                                      Button Lock (Icon on)
                               vehicle.
                        Remote Transmission                                              In – Range Indicator
                You are transmitting the signal to control                        You are within the range of the remote
                                  unit.                                                          control.

                               Low Battery                                                     Power Save

                              Melody Mode                                                   Vibration Mode

                                                                                              Parking Meter
                              Alarm Clock
                                                                                  Reminder when time is up for parking




C. REMOTE TRANSMITTER OPERATION:

  Transmitter
    Button                          System Function                                       Remark

                      Arm & Lock Doors                             Press the Lock button for a half second

                      Silent Arm & Lock Doors                      Press and hold for 1.0 seconds
                                                                  Press and hold for 3 seconds to Activate or
                      Panic Function                              Deactivate panic function
                      Car Locator                                 Press when in Armed Mode
                       Arm and Delete the
       -              2 Stage Shock Sensor                        Press      Twice within 3 seconds.
                        Arm and Delete the
       -                Tilt Sensor
                                                                  Press the     button first then Press       button

                        Arm and Delete the                        Press      Twice then Press         button within 3
   -   -                2 Stage Shock & Tilt Sensor               seconds.

       -              Arm and Hidden Alarm Function               Press the      button first then Press      button

                      Disarm & Unlock Doors                        Press the Unlock button for a half second

                      Silent Disarm & Unlock Doors                 Press and hold for 1.0 seconds

       -              Disarm & Two Steps Door Unlock (optional)   Press twice within 3 seconds


                                                                       Press and hold the       button for 1.0 seconds first
    1.0sec.   -        Silent Disarm & Two Steps Door Unlock
                                                                       then press     button.
                       Trunk Release (Aux 1)                           Press and hold for 3 seconds

         -             Passive Arming By-Pass                          While the system is disarmed

                                                                       Press button once.
                       Activate or Deactivate the Remote Start
                                                                          -   Press twice if set to start safety mode.

                       Running Time Extender                           Press and hold for 2 seconds


          -            Timer Start                                     Press the      button first then tap Press    button.

        +              Turbo Mode                                      Press together & release.

        +              Aux 2 Timer Output                              Press together & release.

         +             Aux 3 Timer Output                              Press together & release.

         +             Aux 4 Timer Output                              Press together & release

         +             Switch Code for 2nd Car Operation               Press together & release.

         +             Shutdown Diagnostic                             Press together & release

                       Level Setting.                                  Press and release F button once.

        F              Light up LCD indicator & Function Setting       Press and hold for 1.0 seconds

                       LCD Remote Program Setting                      Press and hold for 3.0 seconds


D. LCD TRANSCEIVER REMOTE CONTROL:
 1. Press the F buttons the number of times corresponding to the Level you wish to select; the LCD will display LEVEL
   number (                          )
 2. Press the button while LEVEL number text is still on to perform the command.

   Button             Direct Access              Fx1         Level 1          Fx2       Level 2             F x3      Level 3
                                                Arm & Bypass the             Arm & Bypass the
                       Arm & Lock                                                                            Hidden Alarm
                                                 Shock Sensor                   Tilt Sensor
                                                      Vehicle’s
                      Silent Arming                                         Temperature Check
     1 sec.                                          Status Check
                    Disarm & Unlock or
                                             Remote Valet ON / OFF        Car 1 / Car 2 operation             Voltage Check
                     Silent Disarming
                      Trunk Release
                                                     Aux 2                    Aux 3                          Aux 4
                     (Aux 1)
                     Remote Start or                                         Daily Timer Start
                                               Timer Start ON / OFF
                  Running Time Extender                                         ON / OFF
                                                    Melody /                 Power Save Mode                  Button Lock
  F 1 sec                                        Vibration Mode                 ON / OFF                       ON / OFF

 Vehicle’s Status Check: Press F button first then press and hold          buttons for 1 second. The LCD remote transceiver
   will display the current status of the vehicle.


Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user's
authority to operate the equipment.



Document Created: 2019-09-16 13:45:45
Document Modified: 2019-09-16 13:45:45

© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC