Test Report

FCC ID: H5OR28

Test Report

Download: PDF
FCCID_47547

ELECTROMAGNETIC EMISSIONS COMPLIANCE REPORT CERTIFICATION TO FCC PART 15 REQUIREMENTS for UNINTENTIONAL RADIATOR AUTO ALARM SYSTEM RECEIVER MODEL: 6978 FCC ID NO: H5OR28 REPORT NO: 99T0387-2 ISSUE DATE: JULY 06, 1999 Prepared for ADVANCE SECURITY INC. 3F, 48, TA AN STREET, HSI CHIH TAIPEI HSIEN, TAIWAN, R.O.C. Prepared by COMPLIANCE ENGINEERING SERVICES, INC. d.b.a. COMPLIANCE CERTIFICATION SERVICES 1366 BORDEAUX DRIVE SUNNYVALE, CA 94089, USA TEL: (408) 752-8166 FAX: (408) 752-8168

REPORT NO:99T0387-2 FCC ID:H5OR28 EUT:AUTO ALARM SYSTEM RECEIVER DATE:JULY 06, 1999 TABLE OF CONTENTS 1. VERIFICATION OF COMPLIANCE ............................................................................................................ 1 2. PRODUCT DESCRIPTION............................................................................................................................. 2 3. TEST FACILITY .............................................................................................................................................. 2 4. MEASUREMENT EQUIPMENT USED ........................................................................................................ 2 5. TEST CONFIGURATION ............................................................................................................................... 3 6. TESTS CONDUCTED ...................................................................................................................................... 3 7. RADIATED EMISSION TEST PROCEDURE .................................................................................................. 4 8. COHERENT TESTS......................................................................................................................................... 4 9. EQUIPMENT MODIFICATIONS .................................................................................................................. 4 10. TEST CONFIGURATION PHOTOS (RADIATED EMISSION TEST)..................................................... 5 ATTACHMENT: Proposed FCC ID Label Agent Authorization Letter Test data • Radiated Emission Data Block Diagram/Schematics User Manual PAGE NO: 0 COMPLIANCE CERTIFICATION SERVICES CCS DOCUMENT NO: CCSUP4021B 1366 BORDEAUX DRIVE, SUNNYVALE CA 94089 TEL:(408)752-8166 FAX:(408)752-8168 This report shall not be reproduced except in full, without written approval from CCS.

REPORT NO:99T0387-2 FCC ID:H5OR28 EUT:AUTO ALARM SYSTEM RECEIVER DATE:JULY 06, 1999 1. VERIFICATION OF COMPLIANCE COMPANY NAME : ADVANCE SECURITY INC. 3F, 48, TA AN STREET, HSI CHIH TAIPEI HSIEN, TAIWAN, R.O.C. CONTACT PERSON : JESSIE CHIU/SALES MANAGER TELEPHONE NO. : 886-2-643-8192 EUT DESCRIPTION : AUTO ALARM SYSTEM RECEIVER MODEL NAME/NUMBER : 6978 DATE TESTED : JULY 06, 1999 REPORT NUMBER : 99T0387-2 TYPE OF EQUIPMENT SECURITY EQUIPMENT (UNINTENTIONAL RADIATOR) EQUIPMENT TYPE 433.92 MHz SUPERREGENERATE RECEIVER MEASUREMENT PROCEDURE ANSI 63.4 / 1992 LIMIT TYPE CERTIFICATION FCC RULE CFR 47, PART 15.109 The above equipment was tested by Compliance Engineering Services, Inc. for compliance with the requirements set forth in CFR 47, PART 15. This said equipment in the configuration described in this report shows that maximum emission levels emanating from equipment are within the compliance requirements. MIKE C.I. KUO / VICE PRESIDENT COMPLIANCE ENGINEERING SERVICES, INC. PAGE NO: 1 COMPLIANCE CERTIFICATION SERVICES CCS DOCUMENT NO: CCSUP4021B 1366 BORDEAUX DRIVE, SUNNYVALE CA 94089 TEL:(408)752-8166 FAX:(408)752-8168 This report shall not be reproduced except in full, without written approval from CCS.

REPORT NO:99T0387-2 FCC ID:H5OR28 EUT:AUTO ALARM SYSTEM RECEIVER DATE:JULY 06, 1999 2. PRODUCT DESCRIPTION ADVANCE SECURITY INC., Model 6978 is the receiving portion of a multi-purpose security device. The associated Transmitter is manufactured by Advance Security Inc, Model No: 6704S, FCC ID: H5OT09. It can be used with any 677X series alarms. 3. TEST FACILITY The 3 meter open area test site and conducted measurement facility used to collect the radiated data is located at 561F Monterey Road, Morgan Hill, California, U.S.A. A detailed description of the test facilities was submitted to the Commission on May 27, 1994. The measuring instrument which was utilized in performing the tests documented herein has been calibrated in accordance with the manufacturer's recommendations for utilizing calibration equipment which is traceable to recognized national standards. 4. MEASUREMENT EQUIPMENT USED Manufacturer Model Description Cal Due Date Number H.P. E4432A Signal Generator 08/99 (0.5 - 1024 MHz) H.P. 8566B Spectrum Analyzer 08/99 (100Hz - 22GHz) EMCO 3146 Antenna 10/99 (200-1000 MHz) H.P. 8447D Preamplifier 09/99 (0.1 - 1300 MHz) ARA DRG-18/A Antenna(1 - 18GHZ) 12/99 H.P. 8449B Preamplifier (1-26.5GHZ) 03/00 PAGE NO: 2 COMPLIANCE CERTIFICATION SERVICES CCS DOCUMENT NO: CCSUP4021B 1366 BORDEAUX DRIVE, SUNNYVALE CA 94089 TEL:(408)752-8166 FAX:(408)752-8168 This report shall not be reproduced except in full, without written approval from CCS.

REPORT NO:99T0387-2 FCC ID:H5OR28 EUT:AUTO ALARM SYSTEM RECEIVER DATE:JULY 06, 1999 5. TEST CONFIGURATION Set frequency generator to 433.92 MHz, EUT receiving transmission continuously. All the wires are placed on the turn table to their maximum length to simulate the worse emission conditions. 6. TESTS CONDUCTED CFR 47, 15.109 CONDUCTED AT 3 METERS RADIATED EMISSION TESTS PAGE NO: 3 COMPLIANCE CERTIFICATION SERVICES CCS DOCUMENT NO: CCSUP4021B 1366 BORDEAUX DRIVE, SUNNYVALE CA 94089 TEL:(408)752-8166 FAX:(408)752-8168 This report shall not be reproduced except in full, without written approval from CCS.

REPORT NO:99T0387-2 FCC ID:H5OR28 EUT:AUTO ALARM SYSTEM RECEIVER DATE:JULY 06, 1999 7. RADIATED EMISSION TEST PROCEDURE The EUT and all other support equipment are placed on a wooden table 80 cm above the ground screen. Antenna to EUT distance is 3 meters. During the test, the table is rotated 360 degrees to maximize emissions and the antenna is positioned from 1 to 4 meters above the ground screen to further maximize emissions. The antenna is polarized in both vertical and horizontal positions. Monitor the frequency range of interest at a fixed antenna height and EUT azimuth. Frequency span should be small enough to easily differentiate between broadcast stations and intermittent ambients. Rotate EUT 360 degrees to maximize emissions received from EUT. If emission increases by more than 1 dB, or if another emission appears that is greater by 1 dB, return to azimuth where maximum occurred and perform additional cable manipulation to further maximize received emission. Move antenna up and down to further maximize suspected highest amplitude signal. If emission increased by 1 dB or more, or if another emission appears that is greater by 1dB or more, return to antenna height where maximum signal was observed and manipulate cables to produce highest emissions, noting frequency and amplitude. 8. COHERENT TESTS During Radiated Emission Tests, H.P. signal generator model no: E4432A (0.5-1024MHz ) was used to radiate unmodulated CW signal to EUT at 433.92 MHz. Please refer to radiated emission data no: 990706F1 for six highest readings. 9. EQUIPMENT MODIFICATIONS To achieve compliance to FCC section 15.109, the following change(s) were made during compliance testing: NOT APPLICABLE PAGE NO: 4 COMPLIANCE CERTIFICATION SERVICES CCS DOCUMENT NO: CCSUP4021B 1366 BORDEAUX DRIVE, SUNNYVALE CA 94089 TEL:(408)752-8166 FAX:(408)752-8168 This report shall not be reproduced except in full, without written approval from CCS.



Document Created: 2001-06-11 11:39:59
Document Modified: 2001-06-11 11:39:59
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC