P704- RFExp

FCC ID: H4IMSP704

RF Exposure Info

Download: PDF
FCCID_4506194

Report No.: 1980348R-SAUSP03V00 RF Exposure Evaluation Report Product Name : Gaming Mouse Model No. : P704 FCC ID : H4IMSP704 Applicant : Lite-on Technology Corp. Address : 16F,392,Ruey Kuang Road,Neihu ,Taipei Date of Receipt : Aug. 25, 2019 Date of Declaration : Oct. 17, 2019 Report No. : 1980348R-SAUSP03V00 Report Version : V1.0 The test results relate only to the samples tested. The test results shown in the test report are traceable to the national/international standard through the calibration report of the equipment and evaluated measurement uncertainty herein. This report must not be used to claim product endorsement by TAF or any agency of the government. The test report shall not be reproduced without the written approval of DEKRA Testing and Certification Co., Ltd. Page: 1 of 4

Report No.: 1980348R-SAUSP03V00 Issued Date: Oct. 17, 2019 Report No.: 1980348R-SAUSP03V00 Product Name Gaming Mouse Applicant Lite-on Technology Corp. Address 16F,392,Ruey Kuang Road,Neihu ,Taipei Manufacturer Lite-on Technology Corp. Model No. P704 FCC ID. H4IMSP704 Trade Name ASUS FCC 47 CFR 1.1307 Applicable Standard KDB 447498 D01 v06 Test Result Complied Documented By : (Senior Adm. Specialist / April Chen) Tested By : ( Senior Engineer / Wen Lee ) Approved By : ( Director / Vincent Lin ) Page: 2 of 4

Report No.: 1980348R-SAUSP03V00 1. GENERAL INFORMATION 1.1. EUT Description Product Name Gaming Mouse Trade Name ASUS Model No. P704 FCC ID. H4IMSP704 GFSK: 2403-2480MHz Frequency Range BLE V4.2: 2402-2480MHz GFSK: 78CH Number of Channels BLE V4.2: 40CH Channel Separation 1MHz Type of Modulation GFSK Antenna Type MULTILAYER CERAMIC Antenna Gain Refer to the table “Antenna List” Channel Control Auto 1.2. Antenna List No. Manufacturer Part No. Antenna Type Peak Gain 1 PSA RFANT3216120A5T MULTILAYER CERAMIC 2.93dBi for 2.4 GHz Page: 3 of 4

Report No.: 1980348R-SAUSP03V00 2. RF Exposure Evaluation 2.1. Standard Applicable According to 1.1307 (b)(1), systems operating under the provisions of this section shall be operated in a manner that ensure that the public is not exposed to radio frequency energy level in excess of the Commission’s guideline. 2.2. Measurement Result: According to KDB Publication 447498 D01, section 4.3.1, per the calculations of item 1 (Power(mW)/separation (mm)*sqrt(f(GHz)≤3.0), SAR is required as shown in the table below where calculated values are greater than 3.0: 1.) Operation frequency = 2450MHz and antenna separation distance = 5mm, SAR Test Exclusion Threshold = 10mW Maximum peak output power SAR Test Frequency Band Peak Gain: 2.93dBi Exclusion Threshold Calculated Threshold Value (MHz) Conducted EIRP EIRP (≦3.0 SAR is not required) (mW) (dBm) (dBm) (mW) 2402 ~ 2480 0.29 3.22 2.10 10 0.656 Note1: The SAR/MPE measurement is not necessary. Note2: The conducted output power is refer to report No.: 1980348R-RFUSP15V00, 1980348R-RFUSP01V00 from the DEKRA. Page: 4 of 4


Document Created: 2019-10-23 13:43:23
Document Modified: 2019-10-23 13:43:23
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC