Test Report (DTS) rev

FCC ID: H4IKB8190

Test Report

Download: PDF
FCCID_3035107

FCC Test Report (BT LE) Report No.: RF160513D22-1 FCC ID: H4IKB8190 Test Model: WK717 Received Date: May 13, 2016 Test Date: May 18 ~ 19, 2016 Issued Date: Jun. 4, 2016 Applicant: Lite-On Technology Corporation Address: 392, Ruey Kuang Road, Neihu, Taipei 11492, Taiwan, R.O.C Issued By: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch Lab Address: No. 47-2, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan (R.O.C.) This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. The report must not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. Report No.: RF160513D22-1 Page No. 1 / 30 Report Format Version: 6.1.1

Table of Contents Release Control Record .................................................................................................................................. 4 1 Certificate of Conformity...................................................................................................................... 5 2 Summary of Test Results ..................................................................................................................... 6 2.1 Measurement Uncertainty ................................................................................................................... 6 2.2 Modification Record ............................................................................................................................ 6 3 General Information .............................................................................................................................. 7 3.1 General Description of EUT ................................................................................................................ 7 3.2 Description of Test Modes ................................................................................................................... 8 3.2.1 Test Mode Applicability and Tested Channel Detail ............................................................................. 9 3.3 Duty cycle of test signal .................................................................................................................... 10 3.4 Description of Support Units .............................................................................................................. 11 3.4.1 Configuration of System under Test ................................................................................................... 11 3.5 General Description of Applied Standards ........................................................................................ 12 4 Test Types and Results ...................................................................................................................... 13 4.1 Radiated Emission and Bandedge Measurement............................................................................. 13 4.1.1 Limits of Radiated Emission and Bandedge Measurement .............................................................. 13 4.1.2 Test Instruments ................................................................................................................................ 14 4.1.3 Test Procedures................................................................................................................................. 15 4.1.4 Deviation from Test Standard ............................................................................................................ 15 4.1.5 Test Set Up ........................................................................................................................................ 16 4.1.6 EUT Operating Conditions................................................................................................................. 16 4.1.7 Test Results ....................................................................................................................................... 17 4.2 6dB Bandwidth Measurement ........................................................................................................... 21 4.2.1 Limits of 6dB Bandwidth Measurement ............................................................................................. 21 4.2.2 Test Setup .......................................................................................................................................... 21 4.2.3 Test Instruments ................................................................................................................................ 21 4.2.4 Test Procedure .................................................................................................................................. 21 4.2.5 Deviation fromTest Standard ............................................................................................................. 21 4.2.6 EUT Operating Conditions................................................................................................................. 21 4.2.7 Test Result ......................................................................................................................................... 22 4.3 Conducted Output Power Measurement........................................................................................... 23 4.3.1 Limits OF Conducted Output Power Measurement .......................................................................... 23 4.3.2 Test Setup .......................................................................................................................................... 23 4.3.3 Test Instruments ................................................................................................................................ 23 4.3.4 Test Procedures................................................................................................................................. 23 4.3.5 Deviation from Test Standard ............................................................................................................ 23 4.3.6 EUT Operating Conditions................................................................................................................. 23 4.3.7 Test Results ....................................................................................................................................... 23 4.4 Power Spectral Density Measurement .............................................................................................. 24 4.4.1 Limits of Power Spectral Density Measurement ................................................................................ 24 4.4.2 Test Setup .......................................................................................................................................... 24 4.4.3 Test Instruments ................................................................................................................................ 24 4.4.4 Test Procedure .................................................................................................................................. 24 4.4.5 Deviation from Test Standard ............................................................................................................ 24 4.4.6 EUT Operating Condition .................................................................................................................. 24 4.4.7 Test Results ....................................................................................................................................... 25 4.5 Conducted Out of Band Emission Measurement .............................................................................. 26 4.5.1 Limits of Conducted Out of Band Emission Measurement................................................................ 26 4.5.2 Test Setup .......................................................................................................................................... 26 4.5.3 Test Instruments ................................................................................................................................ 26 4.5.4 Test Procedure .................................................................................................................................. 26 4.5.5 Deviation from Test Standard ............................................................................................................ 26 Report No.: RF160513D22-1 Page No. 2 / 30 Report Format Version: 6.1.1

4.5.6 EUT Operating Condition .................................................................................................................. 26 4.5.7 TEST RESULTS ................................................................................................................................ 27 5 Pictures of Test Arrangements .......................................................................................................... 29 Appendix – Information on the Testing Laboratories ................................................................................ 30 Report No.: RF160513D22-1 Page No. 3 / 30 Report Format Version: 6.1.1

Release Control Record Issue No. Description Date Issued RF160513D22-1 Original release. Jun. 4, 2016 Report No.: RF160513D22-1 Page No. 4 / 30 Report Format Version: 6.1.1

1 Certificate of Conformity Product: Wireless Keyboard Brand: DELL Test Model: WK717 Sample Status: Engineering sample Applicant: Lite-On Technology Corporation Test Date: May 18 ~ 19, 2016 Standards: 47 CFR FCC Part 15, Subpart C (Section 15.247) ANSI C63.10: 2013 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. Prepared by : , Date: Jun. 4, 2016 Annie Chang / Senior Specialist Approved by : , Date: Jun. 4, 2016 Rex Lai / Assistant Manager Report No.: RF160513D22-1 Page No. 5 / 30 Report Format Version: 6.1.1

2 Summary of Test Results 47 CFR FCC Part 15, Subpart C (SECTION 15.247) FCC Test Item Result Remarks Clause 15.207 AC Power Conducted Emission N/A Power supply is 3Vdc from batteries 15.205 / Radiated Emissions & Band Edge Meet the requirement of limit. 15.209 / Measurement PASS Minimum passing margin is -6.3dB at 15.247(d) 4880.00MHz. 15.247(d) Antenna Port Emission PASS Meet the requirement of limit. 15.247(a)(2) 6dB bandwidth PASS Meet the requirement of limit. 15.247(b) Conducted power PASS Meet the requirement of limit. 15.247(e) Power Spectral Density PASS Meet the requirement of limit. 15.203 Antenna Requirement PASS No antenna connector is used. 2.1 Measurement Uncertainty Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: Expended Uncertainty Measurement Frequency (k=2) (±) Radiated Emissions up to 1 GHz 30MHz ~ 1000MHz 4.00 dB Radiated Emissions above 1 GHz 1GHz ~ 40GHz 3.36 dB 2.2 Modification Record There were no modifications required for compliance. Report No.: RF160513D22-1 Page No. 6 / 30 Report Format Version: 6.1.1

3 General Information 3.1 General Description of EUT Product Wireless Keyboard Brand DELL Test Model WK717 Status of EUT Engineering sample Power Supply Rating 3Vdc from batteries Modulation Type GFSK Transfer Rate 1Mbps/sec. Operating Frequency 2402-2480MHz Number of Channel 40 Output Power 0.753mW Antenna Type PCB antenna with 1.32dBi gain Antenna Connector N/A Accessory Device N/A Data Cable Supplied N/A Note: 1. The EUT is a Wireless Keyboard. 2. The above EUT information is declared by manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF160513D22-1 Page No. 7 / 30 Report Format Version: 6.1.1

3.2 Description of Test Modes 40 channels are provided to this EUT: FREQ. FREQ. FREQ. FREQ. CHANNEL CHANNEL CHANNEL CHANNEL (MHz) (MHz) (MHz) (MHz) 0 2402 10 2422 20 2442 30 2462 1 2404 11 2424 21 2444 31 2464 2 2406 12 2426 22 2446 32 2466 3 2408 13 2428 23 2448 33 2468 4 2410 14 2430 24 2450 34 2470 5 2412 15 2432 25 2452 35 2472 6 2414 16 2434 26 2454 36 2474 7 2416 17 2436 27 2456 37 2476 8 2418 18 2438 28 2458 38 2478 9 2420 19 2440 29 2460 39 2480 Report No.: RF160513D22-1 Page No. 8 / 30 Report Format Version: 6.1.1

3.2.1 Test Mode Applicability and Tested Channel Detail EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE RE1G RE<1G PLC APCM - √ √ Note 1 √ - Where RE1G: Radiated Emission above 1GHz RE<1G: Radiated Emission below 1GHz PLC: Power Line Conducted Emission APCM: Antenna Port Conducted Measurement NOTE 1: No need to concern of Conducted Emission due to the EUT is powered by batteries. 2. The EUT had been pre-tested on the positioned of each 3 axis. The worst case was found when positioned on X-plane. Radiated Emission Test (Above 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGUURE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE DATA RATE (Mbps) MODE - 0 to 39 0, 19, 39 GFSK 1 Radiated Emission Test (Below 1GHz): Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGUURE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE DATA RATE (Mbps) MODE - 0 to 39 0 GFSK 1 Antenna Port Conducted Measurement: This item includes all test value of each mode, but only includes spectrum plot of worst value of each mode. Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations, data rates and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGUURE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE DATA RATE (Mbps) MODE - 0 to 39 0, 19, 39 GFSK 1 Test Condition: APPLICABLE TO ENVIRONMENTAL CONDITIONS INPUT POWER TESTED BY RE1G 23deg. C, 72%RH 3Vdc Aaron You RE<1G 23deg. C, 72%RH 3Vdc Aaron You APCM 20deg. C, 70%RH 3Vdc Saxon Lee Report No.: RF160513D22-1 Page No. 9 / 30 Report Format Version: 6.1.1

3.3 Duty cycle of test signal Duty cycle of test signal is < 98% Duty cycle = 2.115/2.231 = 0.948, Duty factor = 10 * log( 1/0.948) = 0.23 Report No.: RF160513D22-1 Page No. 10 / 30 Report Format Version: 6.1.1

3.4 Description of Support Units The EUT has been tested as an independent unit together without any necessary accessory or support unit. 3.4.1 Configuration of System under Test EUT (Powered from batteries) Report No.: RF160513D22-1 Page No. 11 / 30 Report Format Version: 6.1.1

3.5 General Description of Applied Standards The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (15.247) 558074 D01 DTS Meas Guidance v03r05 ANSI C63.10-2013 All test items have been performed and recorded as per the above standards. NOTE: The EUT has been verified to comply with the requirements of FCC Part 15, Subpart B, Class B (DoC). The test report has been issued separately. Report No.: RF160513D22-1 Page No. 12 / 30 Report Format Version: 6.1.1

4 Test Types and Results 4.1 Radiated Emission and Bandedge Measurement 4.1.1 Limits of Radiated Emission and Bandedge Measurement Radiated emissions which fall in the restricted bands must comply with the radiated emission limits specified as below table. Other emissions shall be at least 20dB below the highest level of the desired power: Frequencies Field Strength Measurement Distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF160513D22-1 Page No. 13 / 30 Report Format Version: 6.1.1

4.1.2 Test Instruments DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL HP Preamplifier 8447D 2432A03504 Feb. 26, 2016 Feb. 25, 2017 HP Preamplifier 8449B 3008A01201 Feb. 26, 2016 Feb. 25, 2017 MITEQ Preamplifier AMF-6F-260400-33-8P 892164 Mar. 01, 2016 Feb. 28, 2017 Agilent N9038A MY51210129 Feb. 02, 2016 Feb. 01, 2017 TEST RECEIVER Schwarzbeck Antenna VULB 9168 139 Jan. 04, 2016 Jan. 03, 2017 Schwarzbeck Antenna VHBA 9123 480 May 29, 2015 May 28, 2017 Schwarzbeck Horn BBHA-9170 212 Jan. 08, 2016 Jan. 07, 2017 Antenna Schwarzbeck Horn BBHA 9120-D1 D130 Jan. 21, 2016 Jan. 20, 2017 Antenna ADT. Turn Table TT100 0306 NA NA ADT. Tower AT100 0306 NA NA Software Radiated_V7.6.15.9.4 NA NA NA SUHNER RF cable SF104 CABLE-CH6 Aug. 15, 2015 Aug. 14, 2016 With 4dB PAD SUHNER RF cable SF102 Cable-CH8-3.6m Aug. 15, 2015 Aug. 14, 2016 With 3dB PAD KEYSIGHT N9030A MY54490260 Jul. 14, 2015 Jul. 13, 2016 Spectrum Analyzer EMCO Horn Antenna 3115 00028257 Jan. 19, 2016 Jan. 18, 2017 Highpass filter WHK 3.1/18G-10SS SN 8 NA NA Wainwright Instruments ROHDE & SCHWARZ FSV40 101042 Sep. 23, 2015 Sep. 22, 2016 Spectrum Analyzer NOTE: 1. The calibration interval of the above test instruments is 12/24 months. And the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in Chamber No. 6. 4. The Industry Canada Reference No. IC 7450E-6. 5. The FCC Site Registration No. is 447212. Report No.: RF160513D22-1 Page No. 14 / 30 Report Format Version: 6.1.1

4.1.3 Test Procedures a. The EUT was placed on the top of a rotating table 0.8 meters (for below 1GHz) / 1.5 meters (for above 1GHz) above the ground at 3 meter chamber room for test. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to quasi-peak detect function and specified bandwidth with maximum hold mode when the test frequency is below 1 GHz. f. The test-receiver system was set to peak and average detect function and specified bandwidth with maximum hold mode when the test frequency is above 1 GHz. If the peak reading value also meets average limit, measurement with the average detector is unnecessary. Note: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection (QP) at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1 MHz and the video bandwidth is 3 MHz for Peak detection (PK) at frequency above 1GHz. 3. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and the video bandwidth is 3MHz for RMS Average (Duty cycle < 98%) for Average detection (AV) at frequency above 1GHz, then the measurement results was added to a correction factor (10 log(1/duty cycle)). 4. All modes of operation were investigated and the worst-case emissions are reported. 4.1.4 Deviation from Test Standard No deviation. Report No.: RF160513D22-1 Page No. 15 / 30 Report Format Version: 6.1.1

4.1.5 Test Set Up <Frequency Range below 1GHz> Ant. Tower 1-4m Variable EUT& 3m 10m Support Units Turn Table 80cm Ground Plane Test Receiver <Frequency Range above 1GHz> Ant. Tower 1-4m Variable EUT& 3m Support Units Turn Table Absorber 150cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.1.6 EUT Operating Conditions Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF160513D22-1 Page No. 16 / 30 Report Format Version: 6.1.1

4.1.7 Test Results ABOVE 1GHz DATA CHANNEL TX Channel 0 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 54.0 PK 74.0 -20.0 1.91 H 64 54.27 -0.31 2 2390.00 40.3 AV 54.0 -13.7 1.91 H 64 40.63 -0.31 3 *2402.00 80.7 PK 1.91 H 64 80.98 -0.24 4 *2402.00 77.5 AV 1.91 H 64 77.75 -0.24 5 4804.00 49.3 PK 74.0 -24.7 1.45 H 293 43.18 6.08 6 4804.00 43.2 AV 54.0 -10.8 1.45 H 293 37.12 6.08 7 #7206.00 53.1 PK 74.0 -21.0 1.63 H 152 39.63 13.42 8 #7206.00 41.3 AV 54.0 -12.7 1.63 H 152 27.90 13.42 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 2390.00 54.7 PK 74.0 -19.3 1.09 V 108 55.02 -0.31 2 2390.00 40.5 AV 54.0 -13.5 1.09 V 108 40.78 -0.31 3 *2402.00 80.8 PK 1.09 V 108 81.03 -0.24 4 *2402.00 77.6 AV 1.09 V 108 77.79 -0.24 5 4804.00 51.0 PK 74.0 -23.0 2.52 V 191 44.90 6.08 6 4804.00 46.5 AV 54.0 -7.5 2.52 V 191 40.41 6.08 7 #7206.00 53.8 PK 74.0 -20.2 1.16 V 140 40.38 13.42 8 #7206.00 44.7 AV 54.0 -9.3 1.16 V 140 31.31 13.42 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF160513D22-1 Page No. 17 / 30 Report Format Version: 6.1.1

CHANNEL TX Channel 19 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 80.4 PK 1.18 H 98 80.42 0.00 2 *2440.00 77.3 AV 1.18 H 98 77.26 0.00 3 4880.00 48.8 PK 74.0 -25.2 2.21 H 197 42.69 6.14 4 4880.00 41.5 AV 54.0 -12.5 2.21 H 197 35.40 6.14 5 7320.00 53.7 PK 74.0 -20.3 1.58 H 102 40.16 13.51 6 7320.00 41.8 AV 54.0 -12.2 1.58 H 102 28.25 13.51 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2440.00 81.3 PK 1.09 V 100 81.25 0.00 2 *2440.00 78.0 AV 1.09 V 100 77.95 0.00 3 4880.00 52.1 PK 74.0 -21.9 1.17 V 285 45.96 6.14 4 4880.00 47.7 AV 54.0 -6.3 1.17 V 285 41.56 6.14 5 7320.00 54.5 PK 74.0 -19.5 1.46 V 321 41.03 13.51 6 7320.00 45.8 AV 54.0 -8.2 1.46 V 321 32.33 13.51 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF160513D22-1 Page No. 18 / 30 Report Format Version: 6.1.1

CHANNEL TX Channel 39 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 80.9 PK 1.14 H 99 80.65 0.27 2 *2480.00 77.8 AV 1.14 H 99 77.55 0.27 3 2483.50 54.5 PK 74.0 -19.6 1.14 H 99 54.16 0.29 4 2483.50 40.2 AV 54.0 -13.9 1.14 H 99 39.86 0.29 5 4960.00 48.9 PK 74.0 -25.2 2.15 H 33 42.56 6.29 6 4960.00 45.1 AV 54.0 -8.9 2.15 H 33 38.84 6.29 7 7440.00 53.6 PK 74.0 -20.4 2.21 H 241 39.72 13.91 8 7440.00 42.3 AV 54.0 -11.7 2.21 H 241 28.41 13.91 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 *2480.00 82.2 PK 1.09 V 104 81.96 0.27 2 *2480.00 78.5 AV 1.09 V 104 78.26 0.27 3 2483.50 55.6 PK 74.0 -18.5 1.09 V 104 55.26 0.29 4 2483.50 41.9 AV 54.0 -12.1 1.09 V 104 41.57 0.29 5 4960.00 50.8 PK 74.0 -23.2 1.86 V 62 44.52 6.29 6 4960.00 46.9 AV 54.0 -7.1 1.86 V 62 40.64 6.29 7 7440.00 54.6 PK 74.0 -19.4 1.42 V 308 40.65 13.91 8 7440.00 43.8 AV 54.0 -10.2 1.42 V 308 29.86 13.91 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value 5. " * ": Fundamental frequency. Report No.: RF160513D22-1 Page No. 19 / 30 Report Format Version: 6.1.1

BELOW 1GHz WORST-CASE DATA CHANNEL TX Channel 0 DETECTOR Quasi-Peak (QP) FREQUENCY RANGE 30MHz ~ 1GHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 35.53 21.6 QP 40.0 -18.4 1.16 H 22 32.71 -11.07 2 155.47 18.9 QP 43.5 -24.6 1.84 H 336 28.27 -9.38 3 277.25 21.1 QP 46.0 -24.9 1.53 H 156 29.19 -8.12 4 431.14 23.8 QP 46.0 -22.2 1.28 H 52 28.73 -4.93 5 510.73 26.4 QP 46.0 -19.6 2.08 H 22 29.56 -3.20 6 650.65 28.9 QP 46.0 -17.1 1.17 H 119 29.46 -0.57 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION ANTENNA TABLE RAW CORRECTION FREQ. LIMIT MARGIN NO. LEVEL HEIGHT ANGLE VALUE FACTOR (MHz) (dBuV/m) (dB) (dBuV/m) (m) (Degree) (dBuV) (dB/m) 1 36.50 21.7 QP 40.0 -18.3 1.19 V 122 32.70 -10.98 2 65.60 20.1 QP 40.0 -19.9 1.64 V 218 30.93 -10.82 3 141.31 21.1 QP 43.5 -22.4 2.51 V 1 31.04 -9.95 4 288.26 19.9 QP 46.0 -26.1 3.41 V 324 27.84 -7.90 5 356.45 22.3 QP 46.0 -23.8 1.18 V 355 29.08 -6.83 6 507.24 25.9 QP 46.0 -20.1 2.08 V 360 29.30 -3.36 REMARKS: 1. Emission Level(dBuV/m) = Raw Value(dBuV) + Correction Factor(dB/m) 2. Correction Factor(dB/m) = Antenna Factor(dB/m) + Cable Factor(dB) – Pre-Amplifier Factor(dB) 3. The other emission levels were very low against the limit. 4. Margin value = Emission Level – Limit value Report No.: RF160513D22-1 Page No. 20 / 30 Report Format Version: 6.1.1

4.2 6dB Bandwidth Measurement 4.2.1 Limits of 6dB Bandwidth Measurement The minimum of 6dB Bandwidth Measurement is 0.5 MHz. 4.2.2 Test Setup EUT SPECTRUM ANALYZER 10dB ATTENUATION PAD 4.2.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.2.4 Test Procedure a. Set resolution bandwidth (RBW) = 100kHz b. Set the video bandwidth (VBW) ≥ 3 x RBW, Detector = Peak. c. Trace mode = max hold. d. Sweep = auto couple. e. Measure the maximum width of the emission that is constrained by the frequencies associated with the two amplitude points (upper and lower) that are attenuated by 6 dB relative to the maximum level measured in the fundamental emission 4.2.5 Deviation fromTest Standard No deviation. 4.2.6 EUT Operating Conditions The software provided by client to enable the EUT under transmission condition continuously at lowest, middle and highest channel frequencies individually. Report No.: RF160513D22-1 Page No. 21 / 30 Report Format Version: 6.1.1

4.2.7 Test Result FREQUENCY 6dB BANDWIDTH MINIMUM LIMIT CHANNEL PASS / FAIL (MHz) (MHz) (MHz) 0 2402 0.56 0.5 PASS 19 2440 0.50 0.5 PASS 39 2480 0.51 0.5 PASS SPECTRUM PLOT OF WORST VALUE Report No.: RF160513D22-1 Page No. 22 / 30 Report Format Version: 6.1.1

4.3 Conducted Output Power Measurement 4.3.1 Limits OF Conducted Output Power Measurement For systems using digital modulation in the 2400–2483.5 MHz bands: 1 Watt (30dBm) 4.3.2 Test Setup EUT Power Sensor Power Meter Attenuation Pad 4.3.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.3.4 Test Procedures A peak power sensor was used on the output port of the EUT. A power meter was used to read the response of the peak power sensor. Record the power level. 4.3.5 Deviation from Test Standard No deviation. 4.3.6 EUT Operating Conditions Same as Item 4.2.6. 4.3.7 Test Results FREQUENCY PEAK POWER PEAK POWER CHANNEL LIMIT (dBm) PASS/FAIL (MHz) (mW) (dBm) 0 2402 0.753 -1.23 30 PASS 19 2440 0.586 -2.32 30 PASS 39 2480 0.452 -3.45 30 PASS Report No.: RF160513D22-1 Page No. 23 / 30 Report Format Version: 6.1.1

4.4 Power Spectral Density Measurement 4.4.1 Limits of Power Spectral Density Measurement The Maximum of Power Spectral Density Measurement is 8dBm. 4.4.2 Test Setup EUT SPECTRUM 10dB ATTENUATION ANALYZER PAD 4.4.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.4.4 Test Procedure a. Set analyzer center frequency to DTS channel center frequency. b. Set the span to 1.5 times the DTS bandwidth. c. Set the RBW to: 3 kHz ≤ RBW ≤ 100 kHz. d. Set the VBW ≥ 3 × RBW. e. Detector = peak. f. Sweep time = auto couple. g. Trace mode = max hold. h. Allow trace to fully stabilize. i. Use the peak marker function to determine the maximum amplitude level within the RBW. 4.4.5 Deviation from Test Standard No deviation. 4.4.6 EUT Operating Condition Same as Item 4.2.6 Report No.: RF160513D22-1 Page No. 24 / 30 Report Format Version: 6.1.1

4.4.7 Test Results Freq. PSD Limit PASS Channel (MHz) (dBm/3kHz) (dBm/3kHz) /FAIL 0 2402 -13.21 8 PASS 19 2440 -13.28 8 PASS 39 2480 -13.17 8 PASS SPECTRUM PLOT OF WORST VALUE Report No.: RF160513D22-1 Page No. 25 / 30 Report Format Version: 6.1.1

4.5 Conducted Out of Band Emission Measurement 4.5.1 Limits of Conducted Out of Band Emission Measurement Below –20dB of the highest emission level of operating band (in 100kHz Resolution Bandwidth). 4.5.2 Test Setup EUT SPECTRUM 10dB Attenuation Pad ANALYZER 4.5.3 Test Instruments Refer to section 4.1.2 to get information of above instrument. 4.5.4 Test Procedure MEASUREMENT PROCEDURE REF 1. Set the RBW = 100 kHz. 2. Set the VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep time = auto couple. 5. Trace mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum power level in any 100 kHz band segment within the fundamental EBW. MEASUREMENT PROCEDURE OOBE 1. Set RBW = 100 kHz. 2. Set VBW ≥ 300 kHz. 3. Detector = peak. 4. Sweep = auto couple. 5. Trace Mode = max hold. 6. Allow trace to fully stabilize. 7. Use the peak marker function to determine the maximum amplitude level. 4.5.5 Deviation from Test Standard No deviation. 4.5.6 EUT Operating Condition Same as Item 4.2.6 Report No.: RF160513D22-1 Page No. 26 / 30 Report Format Version: 6.1.1

4.5.7 TEST RESULTS CH 0 CH 19 CH 39 Report No.: RF160513D22-1 Page No. 27 / 30 Report Format Version: 6.1.1

CH 0 Band edge CH 39 Band edge Report No.: RF160513D22-1 Page No. 28 / 30 Report Format Version: 6.1.1

5 Pictures of Test Arrangements Please refer to the attached file (Test Setup Photo). Report No.: RF160513D22-1 Page No. 29 / 30 Report Format Version: 6.1.1

Appendix – Information on the Testing Laboratories We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF Lab/Telecom Lab Tel: 886-2-26052180 Tel: 886-3-6668565 Fax: 886-2-26051924 Fax: 886-3-6668323 Hwa Ya EMC/RF/Safety Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. --- END --- Report No.: RF160513D22-1 Page No. 30 / 30 Report Format Version: 6.1.1


Document Created: 2017-12-08 17:08:43
Document Modified: 2017-12-08 17:08:43
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC