Test Report

FCC ID: H4IKB2061

Test Report

Download: PDF
FCCID_1842143

FCC TEST REPORT REPORT NO.: RF121026D07 MODEL NO.: SK-2061 FCC ID: H4IKB2061 RECEIVED: Oct. 26, 2012 TESTED: Oct. 31 ~ Nov. 3, 2012 ISSUED: Nov. 8, 2012 APPLICANT: Lite-On Technology Corporation ADDRESS: 90, Chien 1 Rd. Chung Ho, Taipei Hsien, Taiwan R.O.C. ISSUED BY: Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch LAB LOCATION: No. 47, 14th Ling, Chia Pau Vil., Lin Kou Dist., New Taipei City, Taiwan, R.O.C. This report should not be used by the client to claim product certification, approval, or endorsement by TAF or any government agencies. This report is for your exclusive use. Any copying or replication of this report to or for any other person or entity, or use of our name or trademark, is permitted only with our prior written permission. This report sets forth our findings solely with respect to the test samples identified herein. The results set forth in this report are not indicative or representative of the quality or characteristics of the lot from which a test sample was taken or any similar or identical product unless specifically and expressly noted. Our report includes all of the tests requested by you and the results thereof based upon the information that you provided to us. You have 60 days from date of issuance of this report to notify us of any material error or omission caused by our negligence, provided, however, that such notice shall be in writing and shall specifically address the issue you wish to raise. A failure to raise such issue within the prescribed time shall constitute your unqualified acceptance of the completeness of this report, the tests conducted and the correctness of the report contents. Unless specific mention, the uncertainty of measurement has been explicitly taken into account to declare the compliance or non-compliance to the specification. Report No.: RF121026D07 1 of 22 Report Format Version 5.0.0

Table of Contents RELEASE CONTROL RECORD.................................................................................. 3 1. CERTIFICATION ............................................................................................... 4 2. SUMMARY OF TEST RESULTS ....................................................................... 5 2.1 MEASUREMENT UNCERTAINTY .................................................................... 5 3. GENERAL INFORMATION ............................................................................... 6 3.1 GENERAL DESCRIPTION OF EUT .................................................................. 6 3.2 DESCRIPTION OF TEST MODES .................................................................... 7 3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL .................... 8 3.3 DESCRIPTION OF SUPPORT UNITS .............................................................. 9 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST ............................................... 9 3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS ................................. 10 4. TEST TYPES AND RESULTS ......................................................................... 11 4.1 CONDUCTED EMISSION MEASUREMENT .................................................. 11 4.2 RADIATED EMISSION AND BAND EDGE MEASUREMENT ......................... 11 4.2.1 LIMITS OF RADIATED EMISSION AND BAND EDGE MEASUREMENT ...... 11 4.2.2 TEST INSTRUMENTS .................................................................................... 12 4.2.3 TEST PROCEDURES ..................................................................................... 13 4.2.4 DEVIATION FROM TEST STANDARD ........................................................... 13 4.2.5 TEST SETUP .................................................................................................. 14 4.2.6 EUT OPERATING CONDITIONS .................................................................... 14 4.2.7 TEST RESULTS .............................................................................................. 15 5. PHOTOGRAPHS OF THE TEST CONFIGURATION ...................................... 20 6. INFORMATION ON THE TESTING LABORATORIES .................................... 21 7. APPENDIX A – MODIFICATION RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB ........................................................... 22 Report No.: RF121026D07 2 of 22 Report Format Version 5.0.0

RELEASE CONTROL RECORD ISSUE NO. REASON FOR CHANGE DATE ISSUED RF121026D07 Original release Nov. 8, 2012 Report No.: RF121026D07 3 of 22 Report Format Version 5.0.0

1. CERTIFICATION PRODUCT: Wireless Keyboard BRAND: hp MODEL NO.: SK-2061 APPLICANT: Lite-On Technology Corporation TESTED: Oct. 31 ~ Nov. 3, 2012 TEST SAMPLE: ENGINEERING SAMPLE STANDARDS: FCC Part 15, Subpart C (Section 15.249) ANSI C63.10-2009 The above equipment has been tested by Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, and found compliance with the requirement of the above standards. The test record, data evaluation & Equipment Under Test (EUT) configurations represented herein are true and accurate accounts of the measurements of the sample’s EMC characteristics under the conditions specified in this report. PREPARED BY : , DATE: Nov. 8, 2012 ( Jessica Cheng / Specialist ) APPROVED BY : , DATE: Nov. 8, 2012 ( Ken Liu / Manager ) Report No.: RF121026D07 4 of 22 Report Format Version 5.0.0

2. SUMMARY OF TEST RESULTS The EUT has been tested according to the following specifications: APPLIED STANDARD: FCC Part 15, Subpart C (Section 15.249) STANDARD TEST TYPE RESULT REMARK PARAGRAPH Power supply is 3.0Vdc from 15.207 Conducted Emission Test N/A batteries Radiated Emission Test 15.209 Band Edge Measurement Meet the requirement of limit. 15.249 Limit: 50dB less than the peak value of PASS Minimum passing margin is 15.249 (d) fundamental frequency or meet radiated -9.4dB at 2390.00MHz. emission limit in section 15.209 2.1 MEASUREMENT UNCERTAINTY Where relevant, the following measurement uncertainty levels have been estimated for tests performed on the EUT as specified in CISPR 16-4-2: This uncertainty represents an expanded uncertainty expressed at approximately the 95% confidence level using a coverage factor of k=2. Measurement Frequency Uncertainty 30MHz ~ 1GHz 3.78 dB Radiated emissions Above 1GHz 3.36 dB Report No.: RF121026D07 5 of 22 Report Format Version 5.0.0

3. GENERAL INFORMATION 3.1 GENERAL DESCRIPTION OF EUT EUT Wireless Keyboard MODEL NO. SK-2061 POWER SUPPLY 3.0Vdc from batteries MODULATION TYPE GFSK OPERATING FREQUENCY 2403MHz ~ 2480MHz NUMBER OF CHANNEL 78 ANTENNA TYPE PCB antenna with -4.34dBi gain DATA CABLE N/A I/O PORT N/A ACCESSORY DEVICES N/A NOTE: 1. The EUT is Wireless Keyboard. 2. The above EUT information is declared by the manufacturer and for more detailed features description, please refer to the manufacturer's specifications or User's Manual. Report No.: RF121026D07 6 of 22 Report Format Version 5.0.0

3.2 DESCRIPTION OF TEST MODES 78 channels are provided to this EUT: FREQ. FREQ. FREQ. FREQ. CHANNEL CHANNEL CHANNEL CHANNEL (MHz) (MHz) (MHz) (MHz) 1 2403 21 2423 41 2443 61 2463 2 2404 22 2424 42 2444 62 2464 3 2405 23 2425 43 2445 63 2465 4 2406 24 2426 44 2446 64 2466 5 2407 25 2427 45 2447 65 2467 6 2408 26 2428 46 2448 66 2468 7 2409 27 2429 47 2449 67 2469 8 2410 28 2430 48 2450 68 2470 9 2411 29 2431 49 2451 69 2471 10 2412 30 2432 50 2452 70 2472 11 2413 31 2433 51 2453 71 2473 12 2414 32 2434 52 2454 72 2474 13 2415 33 2435 53 2455 73 2475 14 2416 34 2436 54 2456 74 2476 15 2417 35 2437 55 2457 75 2477 16 2418 36 2438 56 2458 76 2478 17 2419 37 2439 57 2459 77 2479 18 2420 38 2440 58 2460 78 2480 19 2421 39 2441 59 2461 20 2422 40 2442 60 2462 Report No.: RF121026D07 7 of 22 Report Format Version 5.0.0

3.2.1 TEST MODE APPLICABILITY AND TESTED CHANNEL DETAIL EUT APPLICABLE TO CONFIGURE DESCRIPTION MODE PLC RE≥1G RE<1G BM - Note √ √ √ - Where PLC: Power Line Conducted Emission RE≥1G: Radiated Emission above 1GHz RE<1G: Radiated Emission below 1GHz BM: Bandedge Measurement NOTE: No need to concern of Conducted Emission due to the EUT is powered by batteries. RADIATED EMISSION TEST (ABOVE 1 GHz):  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations axis and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE MODE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE - 1 to 78 1, 39, 78 GFSK RADIATED EMISSION TEST (BELOW 1 GHz):  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations axis and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE MODE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE - 1 to 78 1 GFSK BANDEDGE MEASUREMENT:  Pre-Scan has been conducted to determine the worst-case mode from all possible combinations between available modulations and antenna ports (if EUT with antenna diversity architecture). Following channel(s) was (were) selected for the final test as listed below. EUT CONFIGURE MODE AVAILABLE CHANNEL TESTED CHANNEL MODULATION TYPE - 1 to 78 1, 78 GFSK TEST CONDITION: APPLICABLE ENVIRONMENTAL TO INPUT POWER TESTED BY CONDITIONS RE<1G 26deg. C, 75% RH 3.0Vdc Chad Lee RE≥1G 26deg. C, 68% RH 3.0Vdc Chad Lee BM 26deg. C, 68% RH 3.0Vdc Chad Lee Report No.: RF121026D07 8 of 22 Report Format Version 5.0.0

3.3 DESCRIPTION OF SUPPORT UNITS The EUT has been tested as an independent unit together without any necessary accessory or support unit. 3.3.1 CONFIGURATION OF SYSTEM UNDER TEST EUT (Powered from batteries) Test table Report No.: RF121026D07 9 of 22 Report Format Version 5.0.0

3.4 GENERAL DESCRIPTION OF APPLIED STANDARDS The EUT is a RF Product. According to the specifications of the manufacturer, it must comply with the requirements of the following standards: FCC Part 15, Subpart C (Section 15.249) ANSI C63.10-2009 All test items have been performed and recorded as per the above standards. Report No.: RF121026D07 10 of 22 Report Format Version 5.0.0

4. TEST TYPES AND RESULTS 4.1 CONDUCTED EMISSION MEASUREMENT N/A 4.2 RADIATED EMISSION AND BAND EDGE MEASUREMENT 4.2.1 LIMITS OF RADIATED EMISSION AND BAND EDGE MEASUREMENT The field strength of emissions from intentional radiators operate d within these frequency bands shall comply with the following Field Strength of Field Strength of Fundamental Fundamental Harmonics Frequency (millivolts/meter) (microvolts/meter) 902 ~ 928 MHz 50 500 2400 ~ 2483.5 MHz 50 500 5725 ~ 5875 MHz 50 500 24 ~ 24.25 GHz 250 2500 Emissions radiated outside of the specified frequency bands, except for harmonics, shall be attenuated by at least 50 dB below the level of the fundamental or to the general radiated emission limits as below table, whichever is the lesser attenuation Frequencies Field strength Measurement distance (MHz) (microvolts/meter) (meters) 0.009 ~ 0.490 2400/F(kHz) 300 0.490 ~ 1.705 24000/F(kHz) 30 1.705 ~ 30.0 30 30 30 ~ 88 100 3 88 ~ 216 150 3 216 ~ 960 200 3 Above 960 500 3 NOTE: 1. The lower limit shall apply at the transition frequencies. 2. Emission level (dBuV/m) = 20 log Emission level (uV/m). 3. For frequencies above 1000MHz, the field strength limits are based on average detector, however, the peak field strength of any emission shall not exceed the maximum permitted average limits, specified above by more than 20dB under any condition of modulation. Report No.: RF121026D07 11 of 22 Report Format Version 5.0.0

4.2.2 TEST INSTRUMENTS DESCRIPTION & CALIBRATED CALIBRATED MODEL NO. SERIAL NO. MANUFACTURER DATE UNTIL HP Preamplifier 8447D 2432A03504 Feb. 29, 2012 Feb. 28, 2013 HP Preamplifier 8449B 3008A01201 Feb. 29, 2012 Feb. 28, 2013 Agilent Spectrum E4446A MY46180403 Jun. 13, 2012 Jun. 12, 2013 Analyzer ROHDE & SCHWARZ ESCS 30 838251/021 Oct. 14, 2012 Oct. 13, 2013 Test Receiver Schwarzbeck Antenna VULB 9168 137 Apr. 03, 2012 Apr. 02, 2013 Schwarzbeck Antenna VHBA 9123 480 May 22, 2012 May 21, 2013 ADT. Turn Table TT100 0306 NA NA ADT. Tower AT100 0306 NA NA ADT_Radiated_V Software NA NA NA 7.6.15.9.2 SUHNER RF cable SF102 CABLE-CH6 Aug. 19, 2012 Aug. 18, 2013 Schwarzbeck Horn BBHA 9120-D1 D130 May 18, 2012 May 17, 2013 Antenna Highpass filter WHK Wainwright SN 8 NA NA 3.1/18G-10SS Instruments ROHDE & SCHWARZ FSP 40 100036 May 09, 2012 May 08, 2013 Spectrum Analyzer NOTE: 1. The calibration interval of the above test instruments is 12/24 months. And the calibrations are traceable to NML/ROC and NIST/USA. 2. The horn antenna and HP preamplifier (model: 8449B) are used only for the measurement of emission frequency above 1GHz if tested. 3. The test was performed in Chamber No. 6. 4. The Industry Canada Reference No. IC 7450E-6. 5. The FCC Site Registration No. is 447212. Report No.: RF121026D07 12 of 22 Report Format Version 5.0.0

4.2.3 TEST PROCEDURES a. The EUT was placed on the top of a rotating table 0.8 meters above the ground at a 3 meter semi-anechoic chamber. The table was rotated 360 degrees to determine the position of the highest radiation. b. The EUT was set 3 meters away from the interference-receiving antenna, which was mounted on the top of a variable-height antenna tower. c. The height of antenna is varied from one meter to four meters above the ground to determine the maximum value of the field strength. Both horizontal and vertical polarizations of the antenna are set to make the measurement. d. For each suspected emission, the EUT was arranged to its worst case and then the antenna was tuned to heights from 1 meter to 4 meters and the rotatable table was turned from 0 degrees to 360 degrees to find the maximum reading. e. The test-receiver system was set to Peak Detect Function and Specified Bandwidth with Maximum Hold Mode. f. If the emission level of the EUT in peak mode was lower than the limit specified, then testing could be stopped and the peak values of the EUT would be reported. Otherwise the emissions would be re-tested one by one using peak, quasi-peak or average method as specified and then reported in a data sheet. NOTE: 1. The resolution bandwidth and video bandwidth of test receiver/spectrum analyzer is 120kHz for Quasi-peak detection at frequency below 1GHz. 2. The resolution bandwidth of test receiver/spectrum analyzer is 1MHz and video bandwidth is 3MHz for Peak detection at frequency above 1GHz. 3. All modes of operation were investigated and the worst-case emissions are reported. 4.2.4 DEVIATION FROM TEST STANDARD No deviation. Report No.: RF121026D07 13 of 22 Report Format Version 5.0.0

4.2.5 TEST SETUP Ant. Tower 1-4m Variable 3m EUT& Support Units Turn Table 80cm Ground Plane Test Receiver For the actual test configuration, please refer to the attached file (Test Setup Photo). 4.2.6 EUT OPERATING CONDITIONS Set the EUT under transmission condition continuously at specific channel frequency. Report No.: RF121026D07 14 of 22 Report Format Version 5.0.0

4.2.7 TEST RESULTS ABOVE 1GHz DATA CHANNEL TX Channel 1 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 2390.00 59.8 PK 74.0 -14.2 1.00 H 16 29.53 30.24 2 2390.00 44.7 AV 54.0 -9.4 1.00 H 16 14.41 30.24 3 2400.00 50.7 PK 74.0 -23.4 1.00 H 16 20.36 30.29 4 2400.00 18.6 AV 54.0 -35.5 1.00 H 16 -11.74 30.29 5 *2403.00 93.6 PK 114.0 -20.5 1.00 H 16 63.25 30.30 6 *2403.00 61.5 AV 94.0 -32.6 1.00 H 16 31.15 30.30 7 4806.00 46.3 PK 74.0 -27.7 1.00 H 115 9.72 36.60 8 4806.00 14.2 AV 54.0 -39.8 1.00 H 115 -22.38 36.60 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 2390.00 55.1 PK 74.0 -18.9 1.00 V 17 24.88 30.24 2 2390.00 37.2 AV 54.0 -16.8 1.00 V 17 6.95 30.24 3 2400.00 45.5 PK 74.0 -28.5 1.00 V 17 15.20 30.29 4 2400.00 13.4 AV 54.0 -40.6 1.00 V 17 -16.90 30.29 5 *2403.00 88.4 PK 114.0 -25.6 1.00 V 17 58.09 30.30 6 *2403.00 56.3 AV 94.0 -37.7 1.00 V 17 25.99 30.30 7 4806.00 41.8 PK 74.0 -32.2 1.00 V 30 5.19 36.60 8 4806.00 9.7 AV 54.0 -44.3 1.00 V 30 -26.91 36.60 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “ : Fundamental frequency 6. The average value of fundamental frequency is: Average = Peak value + 20log(Duty cycle) Where the duty factor is calculated from following formula: 20 log (Duty cycle) = 20 log (0.1 ms x 2 / 8.016 ms) = -32.1 dB Please see page 18 for plotted duty. Report No.: RF121026D07 15 of 22 Report Format Version 5.0.0

CHANNEL TX Channel 39 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *2441.00 93.4 PK 114.0 -20.6 1.00 H 16 62.96 30.43 2 *2441.00 61.3 AV 94.0 -32.7 1.00 H 16 30.86 30.43 3 4882.00 47.0 PK 74.0 -27.0 1.00 H 153 10.18 36.79 4 4882.00 14.9 AV 54.0 -39.1 1.00 H 153 -21.92 36.79 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *2441.00 87.0 PK 114.0 -27.0 1.00 V 70 56.57 30.43 2 *2441.00 54.9 AV 94.0 -39.1 1.00 V 70 24.47 30.43 3 4882.00 53.9 PK 74.0 -20.1 1.08 V 276 17.09 36.79 4 4882.00 21.8 AV 54.0 -32.2 1.08 V 276 -15.01 36.79 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “ : Fundamental frequency 6. The average value of fundamental frequency is: Average = Peak value + 20log(Duty cycle) Where the duty factor is calculated from following formula: 20 log (Duty cycle) = 20 log (0.1 ms x 2 / 8.016 ms) = -32.1 dB Please see page 18 for plotted duty. Report No.: RF121026D07 16 of 22 Report Format Version 5.0.0

CHANNEL TX Channel 78 DETECTOR Peak (PK) FREQUENCY RANGE 1GHz ~ 25GHz FUNCTION Average (AV) ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *2480.00 90.1 PK 114.0 -24.0 1.00 H 138 59.49 30.56 2 *2480.00 58.0 AV 94.0 -36.1 1.00 H 138 27.39 30.56 3 2483.50 48.0 PK 74.0 -26.1 1.00 H 138 17.38 30.57 4 2483.50 15.9 AV 54.0 -38.2 1.00 H 138 -14.72 30.57 5 4960.00 47.5 PK 74.0 -26.5 1.00 H 176 10.53 36.99 6 4960.00 15.4 AV 54.0 -38.6 1.00 H 176 -21.57 36.99 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 *2480.00 84.9 PK 114.0 -29.1 1.00 V 28 54.37 30.56 2 *2480.00 52.8 AV 94.0 -41.2 1.00 V 28 22.27 30.56 3 2483.50 42.8 PK 74.0 -31.2 1.00 V 28 12.26 30.57 4 2483.50 10.7 AV 54.0 -43.3 1.00 V 28 -19.84 30.57 5 4960.00 42.2 PK 74.0 -31.8 1.00 V 228 5.21 36.99 6 4960.00 10.1 AV 54.0 -43.9 1.00 V 228 -26.89 36.99 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. 5. “ * “ : Fundamental frequency 6. The average value of fundamental frequency is: Average = Peak value + 20log(Duty cycle) Where the duty factor is calculated from following formula: 20 log (Duty cycle) = 20 log (0.1 ms x 2 / 8.016 ms) = -32.1 dB Please see page 18 for plotted duty. Report No.: RF121026D07 17 of 22 Report Format Version 5.0.0

20 log (Duty cycle) = 20 log (0.1 ms x 2 / 8.016 ms) = -32.1 dB Report No.: RF121026D07 18 of 22 Report Format Version 5.0.0

BELOW 1GHz WORST-CASE DATA CHANNEL TX Channel 1 DETECTOR Quasi-Peak FREQUENCY RANGE Below 1000MHz FUNCTION ANTENNA POLARITY & TEST DISTANCE: HORIZONTAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 44.55 19.9 QP 40.0 -20.1 1.37 H 215 5.64 14.26 2 139.93 21.1 QP 43.5 -22.4 1.68 H 63 7.21 13.88 3 185.20 21.8 QP 43.5 -21.7 1.07 H 10 9.45 12.36 4 322.62 21.2 QP 46.0 -24.8 1.00 H 10 4.94 16.25 5 605.53 27.5 QP 46.0 -18.5 1.55 H 215 4.21 23.29 6 919.17 31.0 QP 46.0 -15.0 2.03 H 6 2.91 28.12 ANTENNA POLARITY & TEST DISTANCE: VERTICAL AT 3 M EMISSION TABLE CORRECTION LIMIT ANTENNA RAW VALUE NO. FREQ. (MHz) LEVEL MARGIN (dB) ANGLE FACTOR (dBuV/m) HEIGHT (m) (dBuV) (dBuV/m) (Degree) (dB/m) 1 41.32 25.3 QP 40.0 -14.7 1.76 V 55 11.68 13.66 2 47.78 22.0 QP 40.0 -18.0 1.59 V 177 7.90 14.11 3 76.88 21.7 QP 40.0 -18.3 2.21 V 336 11.18 10.53 4 101.13 23.4 QP 43.5 -20.1 1.09 V 150 13.81 9.58 5 123.77 20.6 QP 43.5 -22.9 1.00 V 9 8.32 12.25 6 138.32 20.5 QP 43.5 -23.0 1.36 V 9 6.78 13.72 REMARKS: 1. Emission level (dBuV/m) = Raw Value (dBuV) + Correction Factor (dB/m). 2. Correction Factor (dB/m) = Antenna Factor (dB/m) + Cable Factor (dB). 3. The other emission levels were very low against the limit. 4. Margin value = Emission level – Limit value. Report No.: RF121026D07 19 of 22 Report Format Version 5.0.0

5. PHOTOGRAPHS OF THE TEST CONFIGURATION Please refer to the attached file (Test Setup Photo). Report No.: RF121026D07 20 of 22 Report Format Version 5.0.0

6. INFORMATION ON THE TESTING LABORATORIES We, Bureau Veritas Consumer Products Services (H.K.) Ltd., Taoyuan Branch, were founded in 1988 to provide our best service in EMC, Radio, Telecom and Safety consultation. Our laboratories are accredited and approved according to ISO/IEC 17025. If you have any comments, please feel free to contact us at the following: Linko EMC/RF Lab Hsin Chu EMC/RF Lab Tel: 886-2-26052180 Tel: 886-3-5935343 Fax: 886-2-26051924 Fax: 886-3-5935342 Hwa Ya EMC/RF/Safety/Telecom Lab Tel: 886-3-3183232 Fax: 886-3-3270892 Email: service.adt@tw.bureauveritas.com Web Site: www.bureauveritas-adt.com The address and road map of all our labs can be found in our web site also. Report No.: RF121026D07 21 of 22 Report Format Version 5.0.0

7. APPENDIX A – MODIFICATION RECORDERS FOR ENGINEERING CHANGES TO THE EUT BY THE LAB No modifications were made to the EUT by the lab during the test. ---END--- Report No.: RF121026D07 22 of 22 Report Format Version 5.0.0


Document Created: 2012-11-15 15:45:33
Document Modified: 2012-11-15 15:45:33
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC