Spourious Emissions

FCC ID: H38UT-86P

Test Report

Download: PDF
FCCID_154942

Test Report ------------------------------------------------------------------------------ 1/12 FCC ID : H38UT-86P Measurement Result: ( Test Frequency: 794.900MHz , Horizontal , 30 MHz ~ 1 GHz ) Test Conditions: Testing room : Temperature : 26 °C Humidity : 73 % RH Testing site : Temperature : 31 °C Humidity : 75 % RH Attenuated minimum Reading Ant. Table Correction Corrected Frequency below the Attenuation Amplitude Height Factors Power mean power limit MHz dBµV m degree dB/m dBm dB dB 198.727 33.57 1.00 150 -13.32 -50.49 44.80 9.77 397.452 27.91 1.00 27 -19.59 -49.88 44.19 9.77 *** Note: 1. Margin = Amplitude - limit, if margin is minus means under limit. 2. Corrected Amplitude = Reading Amplitude – Correction Factors 3. Correction factor = Antenna factor + ( Cable Loss – Amplitude Gain ) ( For example :794.900MHz correction Amplitude= 66.59 – (–26.25) = 92.84dBµV/m ) 4. FI(Volt) = 10 FI (dBµV/m) / 20 X 10-6 FI ( Volt ) = 1092.84/20 X 10-6 = 0. 04385 V 5. P (watt ) = FI 2( Volt ) X d2 (meter) / 49.2 FI ( mW ) = ( 0.04385 X 3 )2/ 49.2 = 0.351785 mW FI ( dBm ) = 10 log 0.351785 (mW)/ 1(mW) = -4.537 (dBm) 6. Mean Power = 10 log (p) (dB) = 10 log ( 0.27008) = -5.685 Attenuated below the mean power = P – Corrected Power (For example : -5.685 – ( - 50.49 ) ) = 44.80 (dB) ) Report No.: S0774792 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Report ------------------------------------------------------------------------------ 2/12 7. Attenuation required = 43 + 10 log ( 0.47564 mW ) = 9.77 Report No.: S0774792 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Report ------------------------------------------------------------------------------ 3/12 Measurement Result: ( Test Frequency: 794.900MHz , Horizontal , 1GHz ~ 18GHz ) Radiated Correction Attenuated minimum Emission Factors Corrected below the Attenuation Amplitude Frequency Amplitude Ant. H. Table mean power Limit ( dB ) (GHz) (dBµV/m) (cm) ( °) dBm (dB) (dB) 1.589 68.03 1.00 64 -8.67 -38.02 32.33 9.77 2.380 64.14 1.00 198 -8.67 -41.91 36.22 9.77 2.770 51.97 1.00 44 -6.84 -52.25 46.56 9.77 2.980 62.81 1.00 10 -6.84 -41.41 35.72 9.77 *** Report No.: S0774792 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Report ------------------------------------------------------------------------------ 4/12 Radiated Emission Test Result: ( Test Frequency: 794.900MHz , Vertical , 30MHz ~ 1GHz ) Frequency Reading Ant. Table Correction Attenuated minimum Corrected Amplitude Height Factors below the Attenuation Power mean power limit MHz dBµV m degree dB/m dBm dB dB 198.727 30.86 3.96 11 -13.54 44.40 -52.98 9.77 397.451 25.16 1.00 6 -19.14 44.30 -53.08 9.77 *** Report No.: S0774792 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Report ------------------------------------------------------------------------------ 5/12 Radiated Emission Test Result: ( Test Frequency: 794.900MHz , Vertical , 1GHz ~ 18GHz ) Radiated Correction Attenuated minimum Emission Factors Corrected below the Attenuation Amplitude Frequency Amplitude Ant. H. Table mean power Limit ( dB ) (GHz) (dBµV/m) (cm) ( °) dBm (dB) (dB) 1.589 64.21 1.00 134 -8.67 -41.84 36.15 9.77 2.380 65.97 1.00 327 -8.67 -40.08 34.39 9.77 2.770 61.97 1.00 50 -6.84 -42.25 36.56 9.77 2.980 74.31 1.00 94 -6.84 -29.91 24.22 9.77 *** Report No.: S0774792 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Report ------------------------------------------------------------------------------ 6/12 Measurement Result: ( Test Frequency: 800.200MHz , Horizontal , 30MHz ~ 1GHz ) Frequency Reading Ant. Table Correction Attenuated minimum Corrected Amplitude Height Factors below the Attenuation Power mean power limit MHz dBµV m degree dB/m dBm dB dB 200.049 32.79 1.00 150 -13.40 -51.19 44.52 8.22 400.100 22.68 2.47 7 -19.71 -54.99 44.43 8.22 600.148 24.69 1.00 84 -23.25 -51.19 48.23 8.22 *** Note: 1. Margin = Amplitude - limit, if margin is minus means under limit. 2. Corrected Amplitude = Reading Amplitude – Correction Factors 3. Correction factor = Antenna factor + ( Cable Loss – Amplitude Gain ) ( For example :794.900MHz correction Amplitude= 65.99 – (–26.64) = 92.63dBµV/m ) 4. FI(Volt) = 10 FI (dBµV/m) / 20 X 10-6 FI ( Volt ) = 1092.63/20 X 10-6 = 0. 04281 V 5. P (watt ) = FI 2( Volt ) X d2 (meter) / 49.2 FI ( mW ) = ( 0.04281 X 3 )2/ 49.2 = 0.335179 mW FI ( dBm ) = 10 log 0.335179 (mW)/ 1(mW) = -4.7472 (dBm) 6. Mean Power = 10 log (p) (dB) = 10 log ( 0.21077 ) = -6.762 Attenuated below the mean power = P – Corrected Power (For example : -6.762 – ( - 51.19 ) ) = 53.94 (dB) ) 7. Attenuation required = 43 + 10 log ( 0.33287 mW ) = 8.22 Report No.: S0774792 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Report ------------------------------------------------------------------------------ 7/12 Measurement Result: ( Test Frequency: 800.200MHz , Horizontal , 1GHz ~ 18GHz ) Radiated Correction Attenuated minimum Emission Factors Corrected below the Attenuation Amplitude Frequency Amplitude Ant. H. Table mean power Limit ( dB ) (GHz) (dBµV/m) (cm) ( °) dBm (dB) (dB) 1.400 72.05 1.00 9 -8.67 -34.00 27.24 8.22 1.600 70.25 1.00 141 -8.67 -35.80 29.04 8.22 2.390 69.97 1.00 95 -8.67 -36.08 29.32 8.22 2.790 61.81 1.00 417 -6.84 -42.41 35.65 8.22 3.000 69.31 1.00 206 -6.84 -34.91 28.15 8.22 3.190 63.64 1.00 4 -6.84 -40.58 33.82 8.22 5.990 38.58 1.00 189 9.72 -49.08 42.32 8.22 6.800 40.91 1.00 206 9.72 -46.75 39.99 8.22 7.410 42.48 1.00 40 9.72 -45.18 38.42 8.22 7.610 42.75 1.00 146 9.72 -44.91 38.15 8.22 *** Report No.: S0774792 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Report ------------------------------------------------------------------------------ 8/12 Radiated Emission Test Result: ( Test Frequency: 800.200MHz , Vertical , 30MHz ~ 1GHz ) Frequency Reading Ant. Table Correction Attenuated minimum Corrected Amplitude Height Factors below the Attenuation Power mean power limit MHz dBµV m degree dB/m dBm dB dB 200.052 30.39 2.44 56 -13.64 -53.35 46.59 8.22 600.152 22.44 1.00 13 -23.56 -51.38 44.62 8.22 *** Report No.: S0774792 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Report ------------------------------------------------------------------------------ 9/12 Radiated Emission Test Result: ( Test Frequency: 800.200MHz , Vertical , 1GHz ~ 18GHz ) Radiated Correction Attenuated minimum Emission Factors Corrected below the Attenuation Amplitude Frequency Amplitude Ant. H. Table mean power Limit ( dB ) (GHz) (dBµV/m) (cm) ( °) dBm (dB) (dB) 1.400 71.20 2.44 10 -8.67 -34.85 28.09 8.22 1.600 62.90 1.00 58 -8.67 -43.15 36.39 8.22 2.390 69.14 1.00 151 -8.67 -36.91 30.15 8.22 2.790 73.81 1.00 206 -6.84 -30.41 23.65 8.22 3.000 75.47 1.00 27 -6.84 -28.75 21.99 8.22 3.190 63.81 1.00 116 -6.84 -40.41 33.65 8.22 5.990 47.41 1.00 237 9.72 -40.25 33.49 8.22 6.800 54.91 1.00 308 9.72 -32.75 25.99 8.22 7.000 51.41 1.00 346 9.72 -36.25 29.49 8.22 7.200 51.25 1.00 15 9.72 -36.41 29.65 8.22 7.410 52.41 1.00 97 9.72 -35.25 28.49 8.22 7.610 57.08 1.00 2 9.72 -30.58 23.82 8.22 Report No.: S0774792 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Report ------------------------------------------------------------------------------ 10/12 Measurement Result: ( Test Frequency: 804.900MHz , Horizontal , 30MHz ~ 1GHz ) Frequency Reading Ant. Table Correction Attenuated minimum Corrected Amplitude Height Factors below the Attenuation Power mean power limit MHz dBµV m degree dB/m dBm dB dB 201.227 34.45 1.00 150 -13.49 -49.44 44.49 9.93 402.452 32.01 1.00 28 -19.81 -45.56 40.61 9.93 *** Note: 1. Margin = Amplitude - limit, if margin is minus means under limit. 2. Corrected Amplitude = Reading Amplitude – Correction Factors 3. Correction factor = Antenna factor + ( Cable Loss – Amplitude Gain ) ( For example :794.900MHz correction Amplitude= 68.37 – (–26.17) = 94.54dBµV/m ) 4. FI(Volt) = 10 FI (dBµV/m) / 20 X 10-6 FI ( Volt ) = 1094.54/20 X 10-6 = 0.05333 V 5. P (watt ) = FI 2( Volt ) X d2 (meter) / 49.2 FI ( mW ) = ( 0.05333 X 3 )2/ 49.2 = 0.520328 mW FI ( dBm ) = 10 log 0.520328 (mW)/ 1(mW) = -2.837 (dBm) 6. Mean Power = 10 log (p) (dB) = 10 log ( 0.31961) = -4.954 Attenuated below the mean power = P – Corrected Power (For example : -4.954 – ( - 49.44 ) ) = 44.49 (dB) ) 7. Attenuation required = 43 + 10 log ( 0.49349 mW ) = 9.93 Report No.: S0774792 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Report ------------------------------------------------------------------------------ 11/12 Measurement Result: ( Test Frequency: 804.900MHz , Horizontal , 1GHz ~ 18GHz ) Radiated Correction Attenuated minimum Emission Factors Corrected below the Attenuation Amplitude Frequency Amplitude Ant. H. Table mean power Limit ( dB ) (GHz) (dBµV/m) (cm) ( °) dBm (dB) (dB) 1.207 66.14 1.00 64 -8.67 -39.91 34.96 9.93 1.609 68.37 1.00 150 -8.67 -37.68 32.73 9.93 2.010 57.80 1.00 29 -8.67 -48.25 43.3 9.93 2.410 60.11 1.00 146 -8.64 -45.91 40.96 9.93 2.810 60.97 1.00 228 -6.84 -43.25 38.30 9.93 3.010 57.97 1.00 339 -6.84 -46.25 41.30 9.93 3.220 59.31 1.00 8 -6.84 -44.91 39.96 9.93 *** Report No.: S0774792 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Report ------------------------------------------------------------------------------ 12/12 Radiated Emission Test Result: ( Test Frequency: 804.900MHz , Vertical , 30MHz ~ 1GHz ) Frequency Reading Ant. Table Correction Attenuated minimum Corrected Amplitude Height Factors below the Attenuation Power mean power limit MHz dBµV m degree dB/m dBm dB dB 201.226 31.72 2.47 4 -13.72 -51.94 46.99 9.93 402.452 29.99 1.00 9 -19.36 -48.03 43.08 9.93 *** Report No.: S0774792 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Report ------------------------------------------------------------------------------ 13/12 Radiated Emission Test Result: ( Test Frequency: 804.900MHz , Vertical , 1GHz ~ 18GHz ) Radiated Correction Attenuated minimum Emission Factors Corrected below the Attenuation Amplitude Frequency Amplitude Ant. H. Table mean power Limit ( dB ) (GHz) (dBµV/m) (cm) ( °) dBm (dB) (dB) 1.207 59.45 1.00 35 -8.67 50.78 -46.60 41.65 1.609 64.08 1.00 35 -8.67 55.41 -41.97 37.02 2.010 56.97 1.00 39 -8.67 48.30 -49.08 44.13 2.410 63.11 1.00 167 -8.64 54.47 -42.91 37.96 2.810 67.97 1.00 229 -6.84 61.13 -36.25 31.30 3.010 64.97 1.00 64 -6.84 58.13 -39.25 34.30 3.220 61.14 1.00 181 -6.84 54.30 -43.08 38.13 3.420 62.31 1.00 38 -6.84 55.47 -41.91 36.96 3.620 57.61 1.00 239 -5.64 51.97 -45.41 40.46 *** Report No.: S0774792 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440


Document Created: 2019-09-05 20:39:06
Document Modified: 2019-09-05 20:39:06
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC