Redo power of EUT to correspondence 21169

FCC ID: H38JW-86P

Test Report

Download: PDF
FCCID_180118

Test Report ------------------------------------------------------------------------------ 1/6 Power Output Measurement A Rules and Specification Limits 2.1046(a), ANSI/ TIA/ EIA-603-1992, Paragraph 2.2.1. 74.861 ( e )( 1 ) : The power of the measured unmodulated carrier power at output of the transmitter power amplifier ( antenna input power ) may not exceed the following: 1. 54 – 72, 76 – 88 and 174 – 216 MHz band 50 mW. 2. 470 – 608 and 614 – 806 MHz band 250 mW. B Test condition and setup Transmitter Test antenna antenna TRANSMITTER SPECTRUM UNDER TEST ANALYZER Standard Test Site 1. Measurement was made on anechoic chamber. The EUT system was placed on non- conductive turntable which is 0.8 meters height, top surface 1.0 X 1.5 meter. The EUT was placed in three direction of the space in order to obtain maximum emission. 2. Connect the equipment as illustrated. Place the transmitter to be tested on the turntable in the standard test site. 3. Raise and lower the test antenna from 1m to 4m with the transmitter facing the antenna and record the highest received signal. 4. Repeat step (3) for seven additional readings at 45 interval positions of the turn-table. Report No.: S0774101 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Report ------------------------------------------------------------------------------ 2/6 Half-wave Test vertical antenna antenna RF SIGNAL SPECTRUM GENERATOR ANALYZER Standard Test Site 5. Replace the transmitter under test with a half-wave vertically polarized antenna. The center of the antenna should be at the same location as the transmitter under test. Connect the antenna to a signal generator with a known output and record the value. 6. FIa(dBm) = FIr (dBm) – Corrected (dB) Corrected (dB) = AF(dB) + [CL(dB) – Amplitude Gain] FIa : Actual Field Intensity FIr : Reading of the Field Intensity AF : Antenna Factor CL : Cable Loss Report No.: S0774101 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Report ------------------------------------------------------------------------------ 3/6 7. The field intensity in Watt can then be determined by the following equation: P (watt ) = FI 2( Volt ) X d2 (meter) / 49.2 P : Power in Watt D : Measurement Distance ( 3 m ) C. List of test Instrument Calibration Date Instrument Name Model No. Brand Serial No. Last time Next time EMI Receiver 8546A HP 3520A00242 06/29/01 06/29/02 RF Filter Section 85460A HP 3448A00217 06/29/01 06/29/02 Bi-log Antenna CBL6141A Schaffner 4206 03/09/01 03/09/02 Switch/Control Unit 3488A HP N/A 11/20/00 11/20/01 (> 30MHz) Auto Switch Box ASB-01 TRC 9904-01 11/20/00 11/20/01 (> 30MHz) Spectrum Analyzer 8564E HP US36433002 08/01/01 08/01/02 Microwave Preamplifier 83051A HP 3232A00347 08/01/01 08/01/02 Horn Antenna 3115 EMCO 9704 – 5178 08/01/01 08/01/02 Anechoic Chamber (cable calibrated together) 05/20/01 05/20/02 The level of confidence of 95%, the uncertainty of measurement of radiated emission is ± 4.96 dB. Report No.: S0774101 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Report ------------------------------------------------------------------------------ 4/6 D. Measurement Result (1) Frequency: 794.900 MHz The maximum field measured is 1.46 dBm FI ( Volt ) = 1098.837/20 X 10-6 = 0.087468 V FI ( mW ) = (0.087468 X 3 )2/ 49.2 = 1.3995 mW Angle of Spectrum Corrected Actually E. R. P. Average Turn Table Reading Value ( °) (dBm) (dB) (dBm) (mW) (mW) 0° -5.24 -5.25 0.01 1.002 45° -6.01 -5.25 -0.76 0.839 90° -4.33 -5.25 0.92 1.236 135° -4.61 -5.25 0.64 1.158 0.9769 180° -5.11 -5.25 0.14 1.032 225° -20.51 -5.25 -15.26 0.029 270° -3.54 -5.25 1.71 1.482 315° -5.41 -5.25 -0.16 1.037 Report No.: S0774101 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Report ------------------------------------------------------------------------------ 5/6 (2) Frequency: 800.200 MHz The maximum field measured is 0.82dBm FI ( Volt ) = 1098.197/20 X 10-6 = 0.0812549 V FI ( mW ) = (0.0812549 X 3 )2/ 49.2 = 1.2077 mW Angle of Spectrum Corrected Actually E. R. P. Average Turn Table Reading Value ( °) (dBm) (dB) (dBm) (mW) (mW) 0° -6.51 -5.25 -1.26 0.748 45° -8.87 -5.25 -3.62 0.435 90° -8.10 -5.25 -2.85 0.519 135° -5.29 -5.25 -0.04 0.991 0.681 180° -5.35 -5.25 -0.10 0.977 225° -13.64 -5.25 -8.39 0.145 270° -5.14 -5.25 0.11 1.026 315° -7.44 -5.25 -2.19 0.604 Report No.: S0774101 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440

Test Report ------------------------------------------------------------------------------ 6/6 (3) Frequency: 804.900 MHz The maximum field measured is 3.32 dBm FI ( Volt ) = 10100.697/20 X 10-6 = 0.108355V FI ( mW ) = (0.108355 X 3 )2/ 49.2 = 2.14771 mW Angle of Spectrum Corrected Actually E. R. P. Average Turn Table Reading Value ( °) (dBm) (dB) (dBμV/m) (mW) (mW) 0° -4.16 -5.29 1.13 1.297 45° -6.76 -5.29 -1.47 0.713 90° -4.78 -5.29 0.51 1.245 135° -2.21 -5.29 3.08 2.032 1.336 180° -5.55 -5.29 -0.26 0.942 225° -7.21 -5.29 -1.92 0.643 270° -2.27 -5.29 3.03 2.009 315° -2.73 -5.29 2.56 1.803 Report No.: S0774101 Training Research Co., Ltd., TEL: 886-2-26935155, Fax: 886-2-26934440


Document Created: 2019-05-31 06:17:02
Document Modified: 2019-05-31 06:17:02
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC