Users Manual

FCC ID: GX9PCU

Users Manual

Download: PDF
FCCID_876464

Pull Cord Unit z Operation z Pull Cord Unit (PCU) is employed for radio control purpose during emergencies involving fire, security, safety of life….and so on. z When emergency switch is pulled down, the PCU will transmit a signal to panel and LED will flash every 2 secs. PCU will continue to retransmit the signal every 5 mins. z When the emergency switch is pushed up (return to standby position), the PCU will perform 3 quick flashes and transmit restore signal to panel. The LED flash and PCU transmission will cease. z Battery The PCU uses two 1.5V “AAA” Alkaline batteries. The PCU can detect low battery automatically by performing self test every 21 hrs. Low battery detection operates at a threshold of 2.3V ± 2%. If 3 consecutive signal transmissions (spaced at least 30 secs apart) occur with battery below 2.3V, a low battery code will be sent with the 4th signal transmission. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. PCU 2007.9.6


Document Created: 2007-12-04 11:53:47
Document Modified: 2007-12-04 11:53:47
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC