Exhibit E Test Report

FCC ID: GT3CSC001

Test Report

Download: PDF
FCCID_97321

JAPAN QUALITY ASSURANCE ORGANIZATION 21-25, KINUTA 1-CHOME, SETAGAYA-KU, TOKYO 157-8573 JAPAN PHONE (03) 3416-0111, TELEX 242-2531 JQA J FAX (03) 3416-9691 JQA APPLICATION NO.: 400-00003 Issue Date : April 18, 2000 Page 1 of 28 EMI TEST REPORT JQA APPLICATION NO. : 400-00003 Model No. : RC-8000 Type of Equipment : Remote Transmitter Regulations Applied : CFR 47 FCC Rules and Regulations Part 15 FCC ID PY : GT3CSC001 Applicant : SMK Corporation Address : 5-5, Togoshi 6-chome, Shinagawa-ku, Tokyo 142-8511, Japan Manufacture : SMK Corporation CO Address : 5-5, Togoshi 6-chome, Shinagawa-ku, Tokyo 142-8511, Japan Received date of EUT : April 3,2000 Final Judgment : Passed TEST RESULTS IN THIS REPORT are obtained in use of equipment that is traceable to Electrotechnical Lab. of MITI Japan and Communications Research Lab. of MPT Japan. The test results only respond to the tested sample. It is not allowed to copy this report even partly without the allowance of the JQA EMC Engineering Dept. Testing Div.

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 2 of 28 TABLE OF CONTENTS Page 1 Documentation 1.1 Test Regulation 3 1.2 General Information 3 1.3 Test Condition 4 – 7 1.4 EUT Modifications / Deviation from Standard 8 1.5 Test results 9 1.6 Summary PY 10 1.7 Test Configuration / Operation of EUT 11 1.8 EUT Arrangement(Drawing) 12 1.9 Preliminary Test and Test-setup (Drawings) 13 – 17 CO 1.10 EUT Arrangement (Photographs) 18 - 19 2 Test Data 2.1 AC Power Line Conducted Emission 0.45 MHz – 30 MHz N/A 2.2 Radiated Emission (Electric Field) 20 – 25 2.3 Frequency Stability N/A 2.4 Occupied Bandwidth 26 – 28 JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 3 of 28 1 DOCUMENTATION 1.1 TEST REGULATION FCC Rules and Regulations Part 15 Subpart A and C (June 23, 1989) Intentional Radiators Test procedure : AC power line conducted emission, radiated emission, frequency stability and occupied bandwidth tests were performed according to the procedures in ANSI C63.4-1992. 1.2 GENERAL INFORMATION 1.2.1 Test facility : 1) Test Facility located at EMC Engineering Dept. Testing Div. : No.2 and 3 Anechoic Chambers( 3 meters Site ) FCC filing No. : 31040/SIT 1300F2 2) EMC Engineering Dept. Testing Div. is recognized under the National Voluntary Laboratory accreditation Program for satisfactory compliance established in title PY 15, Part 285 Code of Federal Regulations. NVLAP Lab Code : 200189-0 (Effective through : June 30, 2000) 1.2.2 Description of the Equipment Under Test (EUT) : 1) Type of Equipment : Remote Transmitter CO 2) Product Type : Pre-Prototype 3) Category : Security/Remote Control Transmitter 4) EUT Authorization : Certification 5) FCC ID : GT3CSC001 6) Trade Name : DENON 7) Model No. : RC-8000 8) Operating Frequency Range : 304.3 MHz to 315 MHz 9) Highest Frequency Used in the EUT : 315 MHz 10) Serial No. : None 11) Date of Manufacture : None 12) Power Rating : DC 6.0(Battery) 13) EUT Grounding : None 1.2.3 Definitions for symbols used in this test report : x - indicates that the listed condition, standard or equipment is applicable for this report. - indicates that the listed condition, standard or equipment is not applicable for this report. JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 4 of 28 1.3 TEST CONDITION 1.3.1 The measurement of the AC Power Line Conducted Emission - was performed in the following test site. x - was not applicable. Test location : Safety Testing Center EMC Engineering Dept. Testing Div. 21-25, Kinuta 1-chome, Setagaya-ku, Tokyo 157-8573, Japan - Shielded Enclosure - Anechoic Chamber No. 2 (portable Type) Used test instruments : Type Model No. Manufacturer Serial No. Last Cal. Interval - Test Receiver - Test Receiver PY ESH-2 ESH-3 Rohde & Schwarz Rohde & Schwarz 880370/016 881460/035 Sep. 1999 May 1999 1 Year 1 Year - Test Receiver ESH-3 Rohde & Schwarz 881460/030 Jun. 1999 1 Year - LISN(for Peripheral) KNW-407 Kyoritsu Electrical 8-833-6 Apr. 1999 1 Year - LISN(for EUT) KNW-407 Kyoritsu Electrical 8-855-2 Apr. 1999 1 Year - LISN KNW-407 Kyoritsu Electrical 8-757-1 Apr. 1999 1 Year CO - RF Cable 3D-2W Fujikura 155-21-005E0 Apr. 1999 1 Year - RF Cable 3D-2W Fujikura 155-21-006E0 Apr. 1999 1 Year - 50ohm Termination - SUHNER 154-06-501E0 Jan. 2000 1 Year - 50ohm Termination - SUHNER 154-06-502E0 Jan. 2000 1 Year JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 5 of 28 1.3.2 The measurement of the Radiated Emission(30 MHz – 1000 MHz) x - was performed in the following test site. - was not applicable. Test location : Safety Testing Center EMC Engineering Dept. Testing Div. 21-25, Kinuta 1-chome, Setagaya-ku, Tokyo 157-8573, Japan x - Anechoic Chamber No. 2 (3 meters) - Anechoic Chamber No. 3 (3 meters) Validation of Site Attenuation : 1) Last Confirmed Date :March, 2000 2) Interval :1 year Used test instruments : Type PY Model No. Manufacturer Serial No. Last Cal. Interval - Test Receiver ESV Rohde & Schwarz 872148/039 May 1999 1 Year - Test Receiver ESVS10 Rohde & Schwarz 826148/002 Jun. 1999 1 Year x - Test Receiver ESVP Rohde & Schwarz 881487/004 May 1999 1 Year - Test Receiver ESVP Rohde & Schwarz 881487/005 Dec. 1999 1 Year CO x - Antenna KBA-511A Kyoritsu Electrical 0-170-1 Nov. 1999 1 Year - Antenna KBA-511A Kyoritsu Electrical 0-201-13 Nov. 1999 1 Year x - Antenna KBA-611 Kyoritsu Electrical 0-147-14 Nov. 1999 1 Year - Antenna KBA-611 Kyoritsu Electrical 0-210-5 Nov. 1999 1 Year x - RF Cable 5D-2W Fujikura 155-21-001E0 Feb. 2000 1 Year - RF Cable 5D-2W Fujikura 155-21-002E0 Feb. 2000 1 Year JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 6 of 28 1.3.3 The measurement of the Radiated Emission(Above 1000 MHz) x - was performed in the following test site. - was not applicable. Test location : Safety Testing Center EMC Engineering Dept. Testing Div. 21-25, Kinuta 1-chome, Setagaya-ku, Tokyo 157-8573, Japan x - No. 2 site (3 meters) - No. 3 site (3 meters) Validation of Site Attenuation : 1) Last Confirmed Date : N/A 2) Interval : N/A PY Used test instruments : Type Model No. Manufacturer Serial No. Last Cal. Interval - Spectrum Analyzer 8563E Hewlett Packard 3221A00201 May 1999 1 Year - Spectrum Analyzer 8560E Hewlett Packard 3240A00189 May 1999 1 Year - Spectrum Analyzer 8566B Hewlett Packard 2140A01091 Apr. 1999 1 Year CO - RF Pre-selector 85685A Hewlett Packard 2648A00522 Apr. 1999 1 Year x - Spectrum Analyzer 8566B Hewlett Packard 2747A05855 May 1999 1 Year x - RF Pre-selector 85685A Hewlett Packard 2091A00933 May 1999 1 Year x - Log-Periodic Antenna HL 025 Rohde & Schwarz 340182/015 Nov. 1999 1 Year - RF Amplifier DBP-0102N5334272B DBS Microwave Inc. 012 Jun. 1999 1 Year x - RF Amplifier WJ-6882-814 Watkins-Johnson 0414 Jun. 1999 1 Year - RF Amplifier WJ-5315-556 Watkins-Johnson 106 Jun. 1999 1 Year - RF Amplifier WJ-5320-307 Watkins-Johnson 645 Jun. 1999 1 Year x - RF Cable(10m) S 04272B Suhner 155-21-011E0 May 1999 1 Year - RF Cable(2m) SUCOFLEX 104 Suhner 155-21-012E0 May 1999 1 Year x - RF Cable(1m) SUCOFLEX 104 Suhner 155-21-013E0 May 1999 1 Year JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 7 of 28 1.3.4 The measurement of the Frequency Stability - was performed. x - was not applicable. Used test instruments : Type Model No. Manufacturer Serial No. Last Cal. Interval - Frequency Counter 53131A Hewlett Packard 3546A11807 June 1999 1 Year - Oven - Ohnishi Co. Ltd. - Aug. 1999 1 Year - DC Power Supply 6628A Hewlett Packard 3224A00284 July 1999 1 Year 1.3.5 The measurement of the Occupied Bandwidth x - was performed. - was not applicable. Used test instruments : Type PY Model No. Manufacturer Serial No. Last Cal. Interval - Spectrum Analyzer 8566B Hewlett Packard 2140A01091 Apr. 1999 1 Year x - Spectrum Analyzer 8566B Hewlett Packard 2747A05855 May 1999 1 Year - Function Generator 3325A Hewlett Packard 2512A21776 June 1999 1 Year - FM Linear Detector MS61A Anritsu Corp. M77486 Sep. 1999 1 Year CO - Level Meter ML422C Anritsu Corp. M87571 June 1999 1 Year JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 8 of 28 1.4 EUT MODIFICATION / Deviation from Standard 1.4.1 EUT MODIFICATION x - No modifications were conducted by JQA to achieve compliance to Class B levels. - To achieve compliance to Class B levels, the following changes were made by JQA during the compliance test. The modifications will be implemented in all production models of this equipment. Applicant : Date : Typed Name : Position : PY 1.4.2 Deviation from Standard: x - No deviations from the standard described in clause 1.1. - The following deviations were employed from the standard described in clause 1.1: CO JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 9 of 28 1.5 TEST RESULTS AC Power Line Conducted Emission - Applicable x - NOT Applicable The requirements are - PASSED - NOT PASSED Remarks : Radiated Emission [§15.231(b)] x - Applicable - NOT Applicable The requirements are x - PASSED - NOT PASSED Remarks: Frequency Stability - Applicable x - NOT Applicable PY The requirements are - PASSED - NOT PASSED Remarks: CO Occupied Bandwidth [§15.231(c)] x - Applicable - NOT Applicable The requirements are x - PASSED - NOT PASSED Remarks: JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 10 of 28 1.6 SUMMARY General Remarks : The EUT was tested according to the requirements of FCC Rules and Regulations Part 15 Subpart A and C (June 23, 1989) under the test configuration, as shown in clause 1.7 to 1.10. The conclusion for the test items of which are required by the applied regulation is indicated under the final judgment. Final Judgment : The “as received” sample; x - fulfill the test requirements of the regulation mentioned on clause 1.1. PY - fulfill the test requirements of the regulation mentioned on clause 1.1, but with certain qualifications. - doesn’t fulfill the test regulation mentioned on clause 1.1. CO Begin of testing : April 3, 2000 End of testing : April 3, 2000 - JAPAN QUALITY ASSURANCE ORGANIZATION - Approved by: Issued by: Masaaki Takahashi Shigeru Osawa Manager Assistant Manager JQA EMC Engineering Dept. JQA EMC Engineering Dept. JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 11 of 28 1.7 TEST CONFIGURATION / OPERATION OF EUT 1.7.1 Test Configuration The equipment under test (EUT) consists of : Symbol Item Manufacturer Model No. FCC ID Serial No. A Remote Transmitter SMK Corporation RC-8000 GT3CSC001 None 1.7.2 Operating condition Power supply Voltage : 6.0 VDC(Battery) The tests have been carried out under the transmitting condition. PY CO JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 12 of 28 1.8 EUT ARRANGEMENT (DRAWINGS) A: Remote Transmitter PY USB Port for Display CO Pannel Setting (No use under Transmitting Mode) JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 13 of 28 1.9 PRELIMINARY TEST AND TEST-SETUP (DRAWINGS) 1.9.1 AC Power Line Conducted Emission ( 450 kHz – 30 MHz) : According to description of ANSI C63.4-1992 sec.13.1.3.1, the AC power line preliminary conducted emissions measurements were carried out. The preliminary conducted measurements were performed using the spectrum analyzer to observe the emission characteristics of the EUT. The EUT configuration, cable configuration and mode of operation were determined for producing the maximum level of emissions. These configurations were used for final AC power line conducted emissions measurements. Shielded Enclosure - Side View - Vertical Ground Plane PY CO 0.4 m Test Receiver EUT Table LISN 0.8 m Power Line Horizontal Ground Plane Filter to AC Power Line JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 14 of 28 1.9.2 Radiated Emission ( 30 MHz – 1000 MHz) : According to description of ANSI C63.4-1992 sec.13.1.4.1, the preliminary radiated emissions measurement were carried out. The preliminary radiated measurements were performed at the measurement distance that specified for compliance to determine the emission characteristics of the EUT. The EUT configuration, cable configuration and mode of operation were determined for producing the maximum level of emissions. These configurations were used for the final radiated emissions measurements. Anechoic Chamber - Side View - PY 4 m CO Half-wave Dipole Antenna EUT 1 m Test Receiver Turn Table 0.8 m Ground Plane 3 m JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 15 of 28 1.9.3 Radiated Emission (Above 1 GHz) : According to description of ANSI C63.4-1992 sec.13.1.4.1, the preliminary radiated emissions measurements were carried out. The preliminary radiated measurements were performed at the measurement distance that specified for compliance to determine the emission characteristics of the EUT. The EUT configuration, cable configuration and mode of operation were determined for producing the maximum level of emissions. These configurations were used for the final radiated emissions measurements. Anechoic Chamber PY - Side View - 4 m CO Log-periodic Antenna EUT 1 m Spectrum Analyzer Turn Table 0.8 m Ground Plane 3 m JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 16 of 28 1.9.4 Frequency Stability : According to description of ANSI C63.4-1992 sec.13.1.5 and sec.13.1.6, the frequency stability measurements were carried out. By using frequency counter with suitable RF amplifier, the carrier frequency of the transmitter under test was measured with a temperature variation of –20°C to +50°C at the normal supply voltage, and if required , with a variation in the primary voltage from 85 % to 115 % the rated supply voltage at the temperature of +20°C. These measurements were carried out after allow sufficient time (approximately 1 hour) for the temperature of the chamber to stabilize. PY Oven CO Vertical Antenna EUT Frequency Counter with Suitable Amplifier Power Supply If required JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 17 of 28 1.9.5 Occupied Bandwidth : According to description of ANSI C63.4-1992 sec.13.1.7, the occupied bandwidth measurements were carried out. By using a spectrum analyzer with a vertical antenna for picking up the signal, the measurements of the emission were made under the transmitting modes of the EUT. The resolution bandwidth of spectrum analyzer was set to the value specified in sec.13.1.7. PY Vertical Antenna Spectrum Analyzer CO EUT Test Table 0.8 m JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 18 of 28 1.9 TEST ARRANGEMENT (PHOTOGRAPHS) PHOTOGRAPHS OF EUT CONFIGURATION FOR RADIATED EMISSIONS MEASUREMENT Photograph present configuration with maximum emission PY CO JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 19 of 28 PY CO JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 20 of 28 TEST DATA 2.2 Radiated Emissions Measurement Date : April 3, 2000 Temp.: 21 °C Humi.: 53 % Operating Frequency : 304.3 MHz Distance of Measurement : 3.0 meters Correction Meter Reading Field Strength at 3 m Frequency Factor Horiz. Vert. Factor* Limits Horiz. Vert. (MHz) (dB/m) (dBµV) (dBµV) (dB/m) (dBµV/m) (dBµV/m) (dBµV/m) Fundamental 304.300 20.5 63.6 61.2 -12.7 75.0 71.4 69.0 Harmonics & other Frequency components 608.600 27.4 33.9 34.5 -12.7 55.0 48.6 49.2 912.900 32.4 25.2 27.7 -12.7 55.0 44.9 47.4 1217.200 26.3 26.9 25.2 -12.7 55.0 40.5 38.8 1521.500 29.1 24.4 26.3 -12.7 55.0 40.8 42.7 1825.800 2130.100 30.7 -13.6 PY 19.4 62.6 22.6 62.9 -12.7 -12.7 55.0 55.0 37.4 36.2 40.6 36.5 2434.400 -12.5 61.5 63.0 -12.7 55.0 36.3 37.8 2738.700 -11.2 55.1 56.8 -12.7 55.0 31.1 32.8 3043.000 -9.9 < 47.0 < 47.0 -12.7 55.0 < 24.3 < 24.3 CO Operating Frequency : 315 MHz Distance of Measurement : 3.0 meters Correction Meter Reading Field Strength at 3 m Frequency Factor Horiz. Vert. Factor* Limits Horiz. Vert. (MHz) (dB/m) (dBµV) (dBµV) (dB/m) (dBµV/m) (dBµV/m) (dBµV/m) Fundamental 315.000 20.8 61.7 58.5 -12.9 75.6 69.6 66.4 Harmonics & other Frequency components 630.000 27.8 31.0 32.5 -12.9 55.6 45.9 47.4 945.000 32.9 24.0 25.6 -12.9 55.6 44.0 45.6 1260.000 26.7 24.2 24.9 -12.9 55.6 38.0 38.7 1575.000 29.5 23.7 22.2 -12.9 55.6 40.3 38.8 1890.000 31.1 17.6 19.2 -12.9 55.6 35.8 37.4 2205.000 -13.2 67.2 66.2 -12.9 55.6 41.1 40.1 2520.000 -12.3 64.1 65.6 -12.9 55.6 38.9 40.4 2835.000 -10.8 53.1 52.5 -12.9 55.6 29.4 28.8 3150.000 -9.5 48.0 49.6 -12.9 55.6 25.6 27.2 JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 21 of 28 Note: 1. The spectrum was checked from 30 MHz to tenth harmonics. All emissions not listed were found to be more than 20 dB below the limits. 2. The symbol of “<” means “or less”. 3. The cable loss and amplifier gain were included in the correction factor. 4. Sample calculation : at 304.300 MHz Cf + Mr + F = 20.5 + 63.6 – 12.7 = 71.4 dBµV/m Where, Cf = Correction Factor Mr = Meter Reading F = Peak to Average Factor 5. “*”: The factor due to the pulsed waveform as shown in the attached PY sheet. 6. Measuring Instrument Setting: Less than 1000 MHz Detector function : Peak CO IF Bandwidth : 1 MHz Above 1000 MHz Resolution Bandwidth : 1 MHz Tested by : Shigeru Osawa Testing Engineer JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 22 of 28 PY CO JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 23 of 28 PY CO JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 24 of 28 PY CO JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 25 of 28 PY CO JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 26 of 28 2.4 Occupied Bandwidth Measurement Date : April 3, 2000 Temp.: 21°C Humi.: 53 % Measurements Results : Specified Limits : 0.25 % of the fundamental frequency 304.3 MHz x 0.0025 = 760.75 kHz 315 MHz x 0.0025 = 787.5 kHz Refer to the attached graphs. PY Tested by : Shigeru Osawa Testing Engineer CO JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 27 of 28 PY CO JQA QUALITY ASSURANCE ORGANIZATION

JQA Application No. :400-00003 FCC ID :GT3CSC001 Model No. :RC-8000 Issue Date :April 18, 2000 Standard :CFR 47 FCC Rules Part 15 Page 28 of 28 PY CO JQA QUALITY ASSURANCE ORGANIZATION


Document Created: 2000-04-17 19:59:05
Document Modified: 2000-04-17 19:59:05
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC