User manual

FCC ID: GPO116480

Users Manual

Download: PDF
FCCID_4261268

- pg.1 LED LIGHTSHOW INSTRUCTIONS Congratulations! You are now the proud owner of a LED LIGHTSHOW. Please read the directions carefully before use. SAFETY WARNING: Remove all plastic fasteners and tags. These are part of the packaging and should be discarded. SAVE THESE INSTRUCTIONS – This manual contains important safety and operating instructions for power units. WARNING ELECTRIC PRODUCT. Keep away from children. Not recommended for children under 3 years of age. As with all electrical products, precautions should be observed during handling and use to reduce the risk of electric shock. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard. WARNING Strobe lights have been known to trigger seizures in people with photosensitive epilepsy. IMPORTANT SAFETY INSTRUCTIONS WHEN USING ELECTRICAL PRODUCTS, BASIC PRECAUTIONS SHOULD ALWAYS BE FOLLOWED INCLUDING THE FOLLOWING: READ AND FOLLOW ALL SAFETY INSTRUCTIONS 1. Do not use seasonal products outdoors unless marked suitable for indoor and outdoor use. When products are used in outdoor applications, connect the product to a Ground Fault Circuit Interrupting (GFCI) outlet. lf one is not provided, contact a qualified electrician for proper installation. 2. This seasonal use product is not intended for permanent installation or use. 3. Do not mount or place near gas or electric heaters, fireplace, candles or other similar sources of heat. 4. Do not secure the wiring of the product with staples or nails, or place on sharp hooks or nails. 5. Do not let lamps rest on the supply cord or on any wire. 6. Unplug the product when leaving the house, when retiring for the night, or if left unattended. 7. This is an electric product-not a toy! To avoid risk of fire, burns, personal injury and electric shock it should not be played with or placed where small children can reach it. 8. Do not use this product for other than its intended use. 9. Do not hang ornaments or other objects from cord, wire, or light string. 10. Do not close doors or windows on the product or extension cords as this may damage the wire insulation. 11. Do not cover the product with cloth, paper or any material not part of the product when in use. 12. This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the product from the outlet. Also unplug any additional strings or products that may be attached to the product. Replace the fuse as per the user servicing instructions(follow product marking for proper fuse rating)and check the product. lf the replacement fuse blows, a short-circuit may be present and the product should be discarded. 13. Read and follow all instructions that are on the product or provided with the product. CAUTION: To reduce the risk of fire and electric shock: 1. Do not install on trees having needles, leaves or branch coverings of metal or materials which look like metal; and 2. Do not mount or support wires in a manner that can cut or damage wire insulation. SAVE THESE INSTRUCTIONS USE AND CARE INSTRUCTIONS 1. When the product is placed on a live tree, the tree should be well maintained and fresh. Do not place on live trees in which the needles are brown or break off easily. Keep the tree holder filled with water. 2. If the product is placed on a tree, the tree should be well secured and stable.

pg.2 3. Before using or reusing, inspect product carefully. Discard any products that have cut, damaged, or frayed wire insulation or cords, cracks in the lampholders or enclosures, loose connections, or exposed copper wire. 4. When storing the product, carefully remove the product from wherever it is placed, to avoid any undue strain or stress on the product conductors, connections, and wires. 5. When not in use, store neatly in a cool, dry location protected from sunlight. USER SERVICING INSTRUCTIONS To replace the fuse: 1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. 2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades. 3. Remove fuse carefully. Turn fuseholder over to remove fuse. 4. RISK OF FIRE. Replace fuse only with 3 Amp, 125Volt fuse (provided with product.) 5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug. 6. RISK OF FIRE. Do not replace attachment plug. Contains a safety device (fuse) that should not be removed. Discard product if the attachment plug is damaged. CAUTION Total maximum number of strings allowed connecting together 8. CAUTION To reduce the risk of fire or electric shock, do not attempt to replace lamps or modify string. FOR INDOOR AND OUTDOOR USE NOTE: This item is not a toy and should be used for decorative purposes only. WARNING NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. • Consult the dealer or an experienced radio/TV technician for help This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate this equipment. THESE INSTRUCTIONS ARE FOR THESE ITEM NUMBERS 10346 11430 13193 13194 13196 13312 19656 19816 19951 19952 34571 35974 37136 37206 37207 39144 39561 39562 39596 39599 39603 39651 39687 39960 40306 46041 48842 48843 49319 49644 49648 80703 81182 82444 110070 110243 111301 111303 112440 112774 112775 112778 111698 111699 114455 115464 115470 112778 116073 116080 116081 116305 116306 115215 116480 116482 QD ID: 71866 Visit WWW.GEMMY.COM for more information. ©2019 GEMMY INDUSTRIES CORP. 117 WRANGLER DRIVE. SUITE 100 COPPELL, TX 75019 U.S.A. 1-800-277-6717 MADE IN CHINA / PRINTED IN CHINA


Document Created: 2019-04-30 13:22:24
Document Modified: 2019-04-30 13:22:24
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC