User manual

FCC ID: GPO112904

Users Manual

Download: PDF
FCCID_3908004

pg.1 Lightshow Box with Speaker ORCHESTRA of LIGHTS™ 1 2 4 - 6 8 6 Pre-programmed Christmas Songs • Dance of the Sugar Plum Fairy • Deck The Halls • Gemmy Christmas Medley • Jingle Bells • Religious Medley • The Gemmy Bell Carol Key Features: • Bluetooth-activated speaker • Timer activation • 6 electrical plug sockets • Designed for indoor and outdoor use

pg.2 Top View ON/OFF Volume Repeat Play/Stop 1 2 4 Backward - 6 8 Timer Activation Press this icon to activate the Timer. The Timer cycle will repeat daily using the selected setting. For example, if you set the timer for 4 hours at 6:00pm, it will turn off at 10:00pm and repeat the cycle each day. To toggle to the timer options, press the Timer icon repeat- edly: - 2 hours: Turns off automatically after 2 hours from the time of activation. The cycle repeats daily -4h  ours: Turns off automatically after 4 hours from the time of activation. The cycle repeats daily - 6 hours: Turns off automatically after 6 hours from the time of activation. Forward Bluetooth The cycle repeats daily -8h  ours: Turns off automatically after Bluetooth speaker 8 hours from the time of activation. function. You can use the The cycle repeats daily speaker and play music from The selected option will be backlit. your mobile devices. Touch to activate. Two chirp sounds confirm activation. Power plug Speaker 6 power plug sockets Fuse Tripod stake Screw-in type collapsible Side View Bottom View

pg.3 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus. 11. Only use accessories specified by the manufacturer. S3125A 12. U se only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the appa- ratus. Use caution when moving the cart/apparatus combination to avoid injury from it tipping over. 13. Unplug this apparatus during lightning storms or when unused for long periods of time. 14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been dam- aged in any way, such as damage to the power supply cord or plug, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped. This apparatus is portable. CAUTION: Use of controls or adjustments or performance of procedures other than those specified may result in hazardous radiation exposure. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage“ within the prod- uct’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

pg.4 Congratulations! You are now the proud owner of a Musical Light Show control box. Please read the directions carefully before use. WARNING: Do not attempt to assemble or operate your Musical Light Show control box during extreme weather conditions including unusually strong winds, heavy rain or accumulating snow. Operating the product during these extreme conditions will affect the performance of the product. SAFETY WARNING: Remove all plastic fasteners and tags. These are part of the packaging and should be discarded. NOTE: This item is not a toy and should be used for decorative purposes only. SAVE THESE INSTRUCTIONS – This manual contains important safety and oper- ating instructions for power units. When using electrical products, basic precautions should always be practiced IMPORTANT SAFETY including the following: INSTRUCTIONS FOR 1. READ AND FOLLOW ALL SAFETY INSTRUCTIONS. OUTDOORS 2. Read and follow all instructions that are on the product or provided with the product. MUSICAL 3. For a cord-connected or direct plug-in power unit, do not use an extension LIGHT SHOW cord. 4. Reference the national electrical code, ANSI/NFPA 70, specifically for the CONTROL BOX installation of wiring and clearances from power and lighting conductors. 5. Installation work and electrical wiring must be done by qualified person(s) in accordance with all applicable codes and standards, including fire-rated construction. 6. For a cord-connected or direct plug-in power unit, do not install or use within 10 feet of a pool. 7. F or a cord-connected or direct plug-in unit, do not use in a bathroom. 8. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. 9. W ARNING: Risk of Electric Shock. When used outdoors, install only to a covered Class A GFCI protected receptacle that is weatherproof with the power unit connected to the receptacle. If one is not provided, contact a qualified electrician for proper installation. Ensure that the power unit and cord do not interfere with completely closing the receptacle cover. 10. W ARNING: Risk of Fire. Installation involves special wiring methods to run wiring through a building structure. Consult a qualified electrician. SAVE THESE INSTRUCTIONS – This manual contains important safety and oper- WARNING ating instructions for power units. 1. M ain plug shall be connected to a MAINS socket outlet with a protective earthing connection. 2. W ARNING :To prevent injury, this apparatus must be securely attached to the floor in accordance with the installation instructions. 3. M AINS plug shall remain readily operable. 4. C AUTION: These servicing instructions are for use by qualified service per- sonnel only. To reduce the risk of electric shock do not perform any servicing other than that contained in the operating instructions unless you are quali- fied to do so. 5. The mechanical positioning is accomplished by means of tools normally available or by means of special tools provided by the organization respon- sible for providing the apparatus as part of the installation kit. 6. The electrical connections are made by using existing TERMINALS and con- nections in the apparatus or the building wiring. Control box 1 piece PACKAGE Control box stake 1 pieces CONTENTS Extra fuse,8A,125V 1 piece

pg.5 Before beginning assembly, remove all parts from carton. Compare parts list PREPARATION and diagram above. If any part is missing or damaged, do not attempt to as- semble or use the product. •Estimated assembly time: 10 - 15 minutes. ASSEMBLY 1. R emove all contents from box and set out on a clear, flat surface. Set up near the area where you want to install the Musical Light Show control box. INSTRUCTIONS 2. Screw control box stake into the track located on the bottom of the control box and lock securely into place. Stake the control box into the ground. Note: For outdoor use, screw in the outdoor straight stake. 3. Plug control box into a standard power outlet. 4. Using the outlets on the bottom of the control box, plug in your light strings and lighted decor. Note: Each outlet is rated for a maximum of 1.25 Amps. We recommend that you never exceed this maximum amount. 5. Smart devices equipped with Bluetooth connectivity can use the Control Box as a sound output speaker. Follow these steps to connect your Bluetooth device to the Control Box: A. M ake sure your mobile device’s Bluetooth is turned on. B. T ap the Bluetooth logo on the Control Box. C. Look for the Lightshow Box device to pair with your device. D. Y ou can now use the Control box as a speaker. 6. S et the timer switch to the desired length of time (See VISUAL GUIDE). Do not discard box as it should be used for storage. Return all parts of the Musical Light Show control box to the original packaging, if possible. Store in a cool, dry location. STORAGE 1. C  an I leave my Musical Light Show control box running overnight? Y  es, you can run your Musical Light Show control box during the day and at night. We recommend that you turn off your Musical Light Show control FAQs box when leaving the immediate area and when retiring for the evening. (Frequently Asked 2. H ow many items can I plug into my Musical Light Show control box? Questions) T he Musical Light Show control box has six outlets for you to create your own Light Show. Each outlet is rated for a maximum of 1.25 Amps. We recommend that you not exceed this maximum amount. 3. W  hat is the best way to store my Musical Light Show control box? S  tore dry in a bag, box or other storage container and keep in a cool, dry location. If possible, we recommend you use the original packaging. 4. W  ill inclement weather affect the performance of my Musical Light Show control box? D  ue to the nature of the control box outlets, operation of your Musical Light Show control box during extreme weather conditions, such as snow, rain or windstorms is not recommended This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, WARNING and (2) this device must accept any interference received, including interfer- ence that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruc- tions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If

pg.6 this equipment does cause harmful interference to radio or television recep- tion, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. ‐Consult the dealer or an experienced radio/TV technician for help important announcement Important Note: RF RADIATION Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an un- EXPOSURE controlled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. STATEMENT This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. These instructions refer to the following item number: 112904 QD ID:91274 Visit WWW.GEMMY.COM for more information. ©2018 GEMMY INDUSTRIES CORP. 117 WRANGLER DRIVE, SUITE 100 COPPELL, TX 75019 U.S.A. 1 (877) 250-9032 MADE IN CHINA PRINTED IN CHINA


Document Created: 2018-06-21 11:06:24
Document Modified: 2018-06-21 11:06:24
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC