SAR system performance check

FCC ID: GKRWM3BAB32

RF Exposure Info

Download: PDF
FCCID_365991

Date/Time: 10/14/03 10:00:06 Test Laboratory: Compliance Certification Services D5GHzV2_M5200_101403 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 Program Name: System Performance Check at Body 5200 MHz Ambient Temperature: 25.0 deg C; Liquid Temperature: 23.5 deg C Communication System: CW 5200MHz; Frequency: 5200 MHz;Duty Cycle: 1:1 Medium: M5200MHz (σ = 5.515 mho/m, εr = 50.5109, ρ = 1000 kg/m3) Phantom section: Flat Section DASY4 Configuration: z Probe: ES3DV2 - SN3021; ConvF(1.4, 1.4, 1.4); Calibrated: 7/29/2003 z Sensor-Surface: 3.1mm (Mechanical Surface Detection) z Electronics: DAE3 Sn427; Calibrated: 2/4/2003 z Phantom: SAM 2; Type: SAM 2; Serial: 1050 z Measurement SW: DASY4, V4.1 Build 47; Postprocessing SW: SEMCAD, V1.8 Build 62 d=10mm, Pin=250mW/Area Scan (9x9x1): Measurement grid: dx=10mm, dy=10mm Reference Value = 91.6 V/m Power Drift = -0.0 dB Maximum value of SAR = 37.2 mW/g d=10mm, Pin=250mW/Zoom Scan (7x7x8)/Cube 0: Measurement grid: dx=4.3mm, dy=4.3mm, dz=3mm Peak SAR (extrapolated) = 87.2 W/kg SAR(1 g) = 23.8 mW/g; SAR(10 g) = 6.68 mW/g Reference Value = 91.6 V/m Power Drift = -0.0 dB Maximum value of SAR = 34.6 mW/g 0 dB = 34.5mW/g

Date/Time: 10/14/03 10:00:06 Test Laboratory: Compliance Certification Services D5GHzV2_M5200_101403 DUT: Dipole 5200-5800MHz; Type: D5GHzV2; Serial: 1003 DASY4 Configuration: z Probe: ES3DV2 - SN3021; ConvF(1.4, 1.4, 1.4); Calibrated: 7/29/2003 z Sensor-Surface: 0mm (Fix Surface) z Electronics: DAE3 Sn427; Calibrated: 2/4/2003 z Phantom: SAM 2; Type: SAM 2; Serial: 1050 z Measurement SW: DASY4, V4.1 Build 47; Postprocessing SW: SEMCAD, V1.8 Build 62 d=10mm, Pin=250mW/Z Scan (1x1x51): Measurement grid: dx=20mm, dy=20mm, dz=2mm Reference Value = 91.6 V/m Power Drift = -0.0 dB Maximum value of SAR = 15.2 mW/g


Document Created: 2003-10-19 21:45:37
Document Modified: 2003-10-19 21:45:37
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC