User Manual.pdf

FCC ID: G6DGF64ARR

Users Manual

Download: PDF
FCCID_3788325

OWNER‘S MANUAL Please read and understand all precaut:ons prior to use Model / Modéle: G21HRR (Remote), GF6A4ARR (Car) Thank you for choosing a premium New Bright product. USA & Canada 30—Day Limited Warranty New Bright Industries warrants to the original purchaser that this product wili be free of defects in materials and workmanship for thirty (30) days from the date of purchase. In the event of such defect within the warranty period, New Bright will repair or replace the product at our sole discretion. This warranty does not cover damage resuiting fre:n unauthorized modifications, accident, misuse, or abuse. Should your item have a defect covered under this warranty, first call the toll free number listed below. Most pro.iems can be resoived in this manner. If necessary, you will be issued a Retum Authorization (RA) number and instructions on how to obtain a Product Return Form. The Product Return Form is to be used when returning a product to us (pastage pre—paid and insured by the consumer). When returning a defective product, please package the product, the Product Return Form and a copy of the dated sates receipt as proof of purchase. Be sure to mark the RA number on the Product Return Form. If the product is returned without a dated sales receipt, it will be excluded from coverage under this warranty. Please allow 4 to 6 weeks for delivery of repaired or replacement vehicles (depending on your location). New Bright Industries® liability for defects in materials and workmanship under this warranty shall be fimited to repacr or + replacement at our sote discretion. in no event shall we be responsible for incidental, consequential or contingent damages (except in those states that do not allow this exclusion or limitation}. Valid only in the USA & Canada. .Contact New Bright industries Customer Service Toll Free at: 1—877—NBI—TOYS (1—877—624—8697) Monday through Friday, 8:00 AM to 5:00 PM Eastem Time L575112RM6/JN120—16

New Bright Table of Contents Section 1: Table of Contents Section 2: Component Checklist Section 3: Vehicle Features & Functions Section 4: Charging theBattery Section 5: Transmitter Battery Installation Transmitter Features & Functions Section 6: Proper Use Precautions & Care Section 7: Trouble Shooting & Support

J New Bright | Component Checklist * (1) R/C Vehicle With USB Cord e (1) Transmitter & (2) AA Batteries

Vehicle Features and Functions _ (U4SB Chnarging Cord Charge ON/OFF Switch Status Light i# vehicle pulls to the left or right during torward driving the Wheel Alignment nay need to be adjusted. The Wheelt Alignment Dial is fockted on bottoam of chassis between the ftront wheeis

Note: When replacing Transmitter batteries: Use alkaline batteries only. Do not mix old and new batteries. Do not mix alkaline, standard or rechargeable batteries. * Forward/Reverse Drive This transmitter is equipped with 2.4GHz technology which allows up to 6 vehicles to be raced at the same time. The transmitter will automatically sync with the vehicle.

Vehicle This vehicle is equipped with an internal Lithium—Jon battery that is recharged via USB. QNAGFF SMMEE CSunmBHehr mmeot Switch must be bhe is tha NEC Aesitins mrinr ta aeharainas in the OFF peosifion PBFHHF (G chaerging . w? w2 — Er —~Fl C ',hnn::fl-q USB Charging Cable and Storage Compartment . Locate the ON/OFF switch and USB cord on the under—side of the vehicle. . Turn the ON/OFF switch to the "OFF" position. 3. Open Storage Compartment cover. _ Remove USB cablefrom the Storage Compartment. {Use care when extending cord as it is aftached to inside internal battery). Cord can be plugged into any computer or USB outlet brick (not included). 5. While charging, the LED under the vehicle will be on. Once fully charged the LED will turn off. Charging is completed in approximately 1 hour. Return cord and secure storage lid before operating the vehicle.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radlo communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interflerence by one or more of the following measures: =—« Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. —— Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. * —— Consult the dealer or an experienced radlo/TV terhniéian for help. ‘ FCCCAUTION: Changes or modification not . o expressly approved by the * A party responsible for L * compliance could void the m user‘s authority to operate Fee thegyipnes. ' sw prtoplr JN332—03 J RSS Statement This device complies with Industry Canada licence—exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Le présent appareil est conforme aux CNR d‘Industrie Canada applicables aux appareils radio exempts de licence. L‘exploitation est autorisée aux deux conditions suivantes : (1) l‘appareil ne doit pas produire de brouillage, et (2) l‘utilisateur de l‘appareil doit accepter dout brouillage radioglectrique gubi, meme si le brouillage est susceptible d‘en compromettre le fonctionnement.

Proper Use Precautions and Care _I Switchvehicle OFF Brush areas where when not‘in use. dirt gets trapped. & 9 Wipe body with a Do not use chemicals soft rag or cloth. > or water to clean

— ‘315",. RT Praves Trouble Shooting © Problem — Vehicle does not move or moves slowly. — Has the Battery Pack been installed inthe vehicle? — Has the rechargeable Battery Pack been fully charged? — Are the metal contact tabs touching, rusty or dirty in the connectors? ~ Make certain there are fresh alkaline batteries in the transmitter and that they have been installed in the correct position. t — Are the (+) and (—) markings on the alkaline batteries in the same positionas the (+) and (—) markings in the Transmitter Battery Compartment? — Make certain that the vehicle ON/OFF switch is in the "ON" position. Problem — Vehicie moves by itself or exhibits reduced range from the transmitter. — Make certain there is no outside radio interference in your area. The best way to test this is to take the vehicleas far away from radio towers, electrical lines or tall buildings as possible to ensure no further radio interference will occur.


Document Created: 2018-03-09 14:31:50
Document Modified: 2018-03-09 14:31:50
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC