User Manual

FCC ID: G6D832B

Users Manual

Download: PDF
FCCID_4348502

TNEORHUNE NOC NNQT RECOMMENDED FOR CHILOREN UNDER 8 YEARS OF AGE New Bright AS WITH ALL ELEGTRIG PRODUCTS, PRFCAUTIONS dHOULD BF ORsERVED DURING HANDLING ANDUSE TO PREVENT ELECTAI SHOCK. INPUT: 120VAC 60Hz 10W OUTPUT: 9.6VDC 500mA. This vehicle is shipped with a demo wire which runs from the transmitter to the vehicle battery compartment. The wire is for package demonstration only and should be removed and discarded as shown here. First, unlock and remove battery Battery Pack Battery Pack OWNER‘S MANUAL Please read and understand all precautions prior to use. Thank you for choosing a premium New Bright product. USA & Canada 30—Day Limited Warranty New Bright Industries warrants to the original purchaser that this product will be free of defects in materials and workmanship for thirty (30) days from the date of purchase. In the event of such defect within the warranty period, New Bright will repair or replace the product at our sole discretion. This warranty does not cover damage resulting from unauthorized modifications, accident, misuse or abuse. Should your item have a defect covered under this warranty, first call,the toll free numberlisted below. Most problems can be resolved in this manner. If necessary, you will be issued a Return Authorization number (RA) and instructions on how to obtain a Product Return Form. The Product Return Form is to be used when returning a product to us (postage pre—paid and insured by the consumer). When returning a defective product, please package the product, the Product Return Form and a copy of the dated sales Grasp and pull receipt as proof of purchase. Be sure to mark the RA number on the Product Return Form. If the product is returned without firmly to remove a dated sales receipt, it will be excluded from coverage under this warranty. Please allow 4 to 6 weeks for delivery of repaired or replacement vehicles (depending on yourlocation). demo wire. New Bright Industries‘ liability for defects in materials and workmanship under this warranty shall be limited to repair or replacement at our sole discretion. In no event shall we be responsible for incidental, consequential or contingent damages (except in those states that do not allow this exclusion orlimitation). Valid only in the USA & Canada. . Remove and discard the Contact New Bright Industries Customer Service Toll Free at: 1—877—NBI—TOYS demo wire which runs from (1—877—624—8697) the vehicle to the Monday through Friday, 8:00 AM to 5:00 PM Eastern Time transmitter. L575115551/JN251—18

New Bright New Bright s a ¢ Table 6f‘ Contents Component Checklist To protect components from damage, they may be packed in the styrofoam tray out of plain sight. Please search styrofoam tray and remove all of the components shown below. Styrofoam should be saved for storing your vehicle. Section 1: Table of Contents Section 2: Component Qhecklist Vehicle Section 3: Removing Demo Wire 9.6V Lithium lon Battery Pack (Included in Vehicle) Battery Charger Section 4: Charging the Battery Transmitter Section 5: Battery Installation in Vehicle 2 AA Batteries Section 6: Vehicle Features and Functions Section 7: Transmitter Features and Functions Section 8: Transmitter Features and Functions Battery Installation in Transmitter Section 9: Proper Use Precautions and Care Section 10: Trouble Shooting and Support Section 11: Cautions REF—43806 180419

Vehicle Vehicle Charging Status Light «rrunuMION LHARGER Battery Charger Push and Hold Button To Remove 9.6V Battery Pack 1. Insert the 9.6V Lithium lon rechargeable battery pack securely into the charger and push up to lock. Be sure the arrows are properly matched (as shown above}). Battery Pack 2. Plug the Charger into a standard indoor electrical outlet. This power unit is intended to be correctly orientated in a vertical or wall mount posttion. 3. Allow battery to charge for 1—1.5 Hours. Charging Status Light will be solid red while battery is charging. When charging is complete, light will blink green. 4. To remove the battery, press and hold the release button and slide battery down to unlock (as shown above). 5. Charge will last approximately 12 minutes depending on terrain and driving style. Battery Pack IMPORTANT: It is normal for the battery pack to become warm after charging and/or use. Be sure to allow the battery pack to cool before using or recharging. Recharging a warm battery pack will greatly reduce the battery life. ATTENTION PARENTS: * The Battery Charger & Battery Pack need to be periodically examined for potential hazards. Any potentially hazardous parts need to be repaired or replaced.

New Bright Vehicle \Features and Do not recharge Battery Pack if itis hot or warm to the touch. Allow Battery Pack to cool before recharging. Recharging a hot or warm Battery Pack will shorten the life of the Pack. \ ‘Do not recharge a Battery Pack if it appears to be damaged or leaking. Always unplug Battery Charger when not inuse. Always remove Battery Pack from Battery Compartment when not in use. ON/OFF Wheel Alignment * Switch (Steering Trim) Do not dispose batteries in fire. Leakage, explosion and personal injury may occur. Dispose of Rechargeable Battery' Pack properly. Do not attempt to disassemble Battery Pack or Charger. _ Do not use Battery Charger for any use other than instructed in this booklet. Only an adult should charge Batteries. » Do not attempt jumps or tricks with this vehicle. * If vehicle pulls to the left or right during forward driving the Steering Trim may need to be adjusted. The Steering Trim is located on bottom of chassis between the front wheels.

Transmitter | Transmitter Features and Functions _ Featuresand Functions START/MUTE: f HORN: Press to hear Press to hear sound. Press horn sound. Demo Wire Connection again for This vehicle is shipped with a demo wire which mute. runs from the transmitter to the vehicle chassis. ‘ The wire is for package demonstration only and should be removed and discarded. START/ Sounds will continue as long as car is active. Press again to turn off the sounds. Press start to reactivate sounds. Forward/Reverse Driving Steering Note: Vehicle has working headlights. When driving forward or reverse the headlights will turn on. This transmitter is equipped with 2.4GHz technology which allows up to 6 vehicles to be raced at the same time. The transmitter will automatically sync with the vehicle.

Proper Use 90% of all difficulties experienced with radio controlled vehicles are due to either weak batteries or batteries that have been installed incorrectly. When batteries become weak, the vehicle may not necessarily stop completely but may exhibit slow response, slow speed or erratic behavior. Problem — Vehicle does not move or moves slowly. — Make certain there are fresh alkaline batteries in the transmitter and that they have been installed in the correct position. M% — Are the (+) and (—) markings on the alkaline batteries in the same position as the (+) and (—) markings in the Transmitter Battery Compartment? — Has the Battery Pack been installed in the vehicle? — Has the rechargeable Battery Pack been fully charged? — Are the (+) and (—) markings on the Battery Pack in the same position as the (+) and (—) //,@ 4J markings in the Battery Compartment? — Are the metal contact tabs touching, rusty or dirty in the transmitter? — Make certain that the vehicle ON/OFF switch is in the "ON" position. Problem — Vehicle moves by itself or exhibits reduced range from the transmitter. — Make certain there is no outside radio interference in your area. The best way to test this is to take the vehicle as far away from radio towers, electrical lines or tall buildings as possible to ensure no further radio interference will occur. SWItCh vehicle OFF > FCC CAUTION: _whennotin use Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment. NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipmentoff and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. Wnpebody W|th a Do not useChenjicals — — Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. soft rag or cloth. — or water to clean. — Consult the dealer or an experienced radio/TV technician for help.

CAUTIONS * Do not leave the toy unattended while charging it. * Battery charging should be done by adults. * Charge the toy on a non—flammable surface and keep it away from flammable items. * Turn the charger off when the toy‘s battery is charged, and always unplug it from the toy. * Disconnect AC wall chargers from outlets while not in use. * If the toy has been damaged, immediately stop use, unplug, and safely move the toy away from flammable materials. * Follow the manufacturer‘s instructions for charging the toy. Do NOT charge longer than recommended. ) ao (wsarios) NEW BRIGHT REFO8CPSC L948141418/JN071—08


Document Created: 2019-07-02 10:06:25
Document Modified: 2019-07-02 10:06:25
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC