User Manual

FCC ID: G6D1350MB

Users Manual

Download: PDF
FCCID_4446154

BATTERY INSTALLATIONS AND OPERATING INSTRUCTIONS Transmitter Battery Installation: 1. Locate and remove screw and slide to open battery compartment cover on transmitter. 2. Install 2 "AAA" alkaline batteries in the transmitter with positive (+) and negative(-) ends matching the compartment markings. 3. Replace the battery cover and replace the screw. TRANSMITIER Small Truck Battery Installation: 1. Locate and remove screw and slide to open battery compartment cover on vehicle. 2. Install 2 "AAA" alkaline batteries in the vehicle with positive(+) and negative(-) ends matching the compartment markings. 3. Replace the battery cover and replace the screw. SMALL TRU<?KS _I Operation: Vehicle Storage: Move switch on bottom of desired vehicle to the "ON" Trailer Box doors can be opened for storage of 2 small position. trucks and transmitter. To drive FORWARD, push the center joystick forward. To STOP, release the joystick. For Best Results: NOTE: One transmitter operates all three vehicles. 1. Do not mix old and new batteries. If a vehicle moves unintentionally, be sure the 2. Do not mix alkaline, standard or rechargeable batteries. ON/OFF switch is in the OFF position. 3. Use alkaline batteries only.

Antenna Placement 9 fRanglnrres VEHC:( USA & Canada 30—Day Limited Warranty New Bright Industries warrants to the original purchaserthat this product will be free of defects in materials and workmanship for thirty (30) days from the date of purchase. In the event of such defect within the warranty period, New Bright will repair or replace the product at our sole discretion. This warranty does not cover damage resulting from unauthorized modifications, accident, misuse or abuse. Should your item have a defect covered under this warranty, first call the toll free number listed below. Most problems can be resolved in this manner. If necessary, you will be issued a Return Authorization number (RA) and instructions on how to obtain a Product Return Form. The Product Return Form is to be used when returning a product to us (postage pre—paid and insured by the consumer). When returning a defective product, please package the product, the Product Return Form and a copy of the dated sales receipt as proof of purchase. Be sure to mark the RA number on the Product Return Form. If the productis returned without a dated sales receipt, it will be excluded from coverage under this warranty. Please allow 4 to 6 weeks for delivery of repaired or replacement vehicles (depending on your location). New Bright Industries‘ liability for defects in materials and workmanship under this warranty shall be limited to repair or replacementat our sole discretion. In no event shall we be responsible for incidental, consequential or contingent damages (exceptin those states that do not allow this exclusion orlimitation). Valid only in the USA & Canada. Contact New Bright Industries Customer Service Toll Free at: 1—877—NBI—TOYS (1—877—624—8697) Monday through Friday, 8:00 AM to 5:00 PM Eastern Time F.C.C. CAUTION: for Changes or modifications of the device and antenna not expressly approved by the party responsible compliance could void the user‘s authority to operate the equipment * NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interferencein a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interferenceto radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or moreof thefollowing measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. REF 13302306 JN231—16


Document Created: 2019-09-16 14:47:31
Document Modified: 2019-09-16 14:47:31
© 2024 FCC.report
This site is not affiliated with or endorsed by the FCC